fj40

My machine shop has a Rebuilt F / 1F, 3.9L, bored .030 over engine for sale. $5,000.00 (+$1,200.00 Core Charge) Block SN #: F 412142 Cylinder Head #: 60050 New Piston Rings - .030 Oversized .030 Over flat top pistons New OEM Toyota Crankshaft New main & rod bearings New camshaft bearings...

I have a variety of Fj40 and a few 60 parts up for your review. If you have questions or would like an item, message me with the tag #. Items will be shipped with USPS and a tracking # Thanks -Bruce

Howdy, What is the right/best turn ratio for a Saginaw 5691676 box for a ‘72 FJ40? TIA.

This is the right angle fuel pipe from the rubber hose from the fuel tank where it takes a 90 degree bend through the floor. Free for the price of shipping

Hi All, I'm getting to the pointy end of my build and having some difficulty finding the right seats for my truck. Before I go and put something else in I thought I'd try you guys to see if anyone knew where I can find a set of these seats. Not to worried about condition. picture below show...

I have a 2F for sale that came out of a 79 FJ40. $800 Note: Early 4speed BellHousing on 2F SOLD! 3F BellHousing/inspection cover SOLD! And A regular 2F 4 speed BellHousing/inspection cover. $300 2F Flywheel. $200 PM me if interested.

WTB early FJ40 fuel filler neck, 3 bolt.

Hey MUD, purchased this engine this summer from a running and driving 83 fj60. Was going to install in a fj40 but decided to move away from that project and stick to the 80 series. This motor ran great had 120k on the odometer. Not a lot of other info on my end but happy to answer any questions...

Location: Wellington, New Zealand As title says, both are rare items and are in excellent condition for the age. Just slight surface rust or patina if you want to call it that. Both are absolutely straight no dents whatsoever. Price: USD + Shipping Apron $850 Lid: $250 Or take both for $950

FJ40 - 1974 complete hard top. $3200. All parts included plus new top gasket/seal. surface rust on some of the parts but all in very good condition. Glass and gaskets in good condition

Opening this thread to document my pop top conversion.

I bought this as a running shell to settle my Cruiser driving urges while I worked on my other 40. Now I need to actually work on the garage truck! Recent work: -Front disc axle swap from a 1976 -Complete new wiring harness, every wire in truck replaced -Rebuilt rear diff -New license plate...

Hi all, Just took the plunge with a new 40. My 3rd FJ40, but first in 26 years! I’m super excited. And so happy places and forums and fellowship like this now exist! Please help me identify or explain the purpose of this “Aux 12v/24v” switch. Here’s 3 pics of the dash. And the “red light”...

Asking $3200 and I can get it on a pallet and ship or deliver in person within a reasonable distance. Located in Pittsboro, NC and I can get it on a pallet and ship. I've got the transfer case and manual transmission out of my 79 FJ and since it's getting LS swaped, this is just taking up...

Aloha, WANTED: I'm restoring a 1971FJ40 with a hardtop. I'm looking for the bar and brackets located above the rear door or just below the hardtop( top reinforcement bar)This piece connects to the left and right side panels. i’m installing a hatch not the ambulance doors. Can anyone help?

For anyone interested in a morale boost while working on their project I have transformed a few old (decal) designs into 12x18" poster sets of (3) -- Specs below: - 270gsm (thick) paper - Satin coating - Limited to 25 pieces per design International shipping is also possible -- Find them here...

The piece on the steering column that is directly behind the steering wheel that has the turn signal lever, I needed the bolt that goes on the bottom of that piece and tightens it to hold it in place. The threads on mine are bad. If someone has one they don't need, or if you can point me in the...

The piece on the steering column that is directly behind the steering wheel that has the turn signal lever, I needed the bolt that goes on the bottom of that piece and tightens it to hold it in place. The threads on mine are bad. If someone has one they don't need, or if you can point me in the...

Hello. A couple years ago I built a new hardtop for my FJ40 with the Classic Cruisers roof cap. At the time, I could never separate my door bows in order to properly bolt it to the top. I just put it together anyway. Now it's been a while, and I really need my top mounted properly. I removed...

Small Pattern FJ40 Steering arms Off a 76 70$.