door

Was hoping to find any advice from the pros in here on how to replace window regulator on early FJ40. I have the wing vent windows on this door. The access to the innards of this door look like a PITA! If anyone has any photos or has a simple 'do it yourself' guide to do this, I'd welcome any...

I have an annoying door lock issue that I've been trying to research with no results. I have a '96 with no remote key fob. It unlocks and locks/unlocks as it should with the key in the door lock cylinder. I have a fob that's *supposed to* work, but haven't gotten around to trying to program...

I have rust beginning on the lower portion of a driver's side door that needs looking after before it gets too out of control. I know on the outside I can sandblast/wire brush/POR15 treatment then prime, paint and re-apply seam sealer but, what can I do about the hidden rust that is surely in...

I am looking for a set of fst model door hinges for my 1972 project. I have the tub side. I need an extra set of the door sides. I am planning on restoring a set of both hard and dst doors and do not want to change hinges. let me know if you have a set of 4 or just 1 laying around.

I have a vibration around 60+ and i read that this thing might help.. anyone have a spare they want to sell me? looks like an elongated hockey puck? thanks!

My LC100 with oak/tan interior has the usual faded spot on the top of the brown door trim. I am having a rotten time finding any matching dye. I've tried product from two places that were supposed to match, but weren't even close. I'm $60 into this and not even close to getting this done...

I am in need of the phillips screws that hold the bezels on the door in an 82 FJ40, I actually need 4 pieces . I also need the bolt that holds the shoulder harness to the roll bar , mine is stripped. 1982 FJ40

I'm looking for some pictures of DIY door panels in a 80 preferably. I'm thinking about using Fiberglass Reinforced Plastic, but I'm open to other ideas. I am not going to recover them and I'm searching for manual window regulators this will be pure utility but I still want it to look decent...

sorry if i couldn't find the treat that's already talking about this... i have a problem with my tailgate, i firt tought it was the alignment of the lock and the pin (so i adjusted it and it closes as new) but i still have the problem that i close my tailgate, lock it and go for a little drive...

I've got some wind noise coming from the upper rear corner of my 2000 lx470 front drivers side door so i ordered replacement weather stripping from lexuspartsnow.com The front door opening trim ( 62312-60081-A0 )I received was bluish gray and not ivory. Lexuspartsnow is telling me that the ivory...

Help me out, who did the write up on fixing the wallowed out door gear. I have a couple that needs some love and was wanting to play with a fix. Thinking NicP, but can't remember. Thanks, Ron

I have 2 ambulance door top portions and 1 window glass for sale. I guess the frames could be used for patchwork . I'm asking $40 for the pair plus shipping . The window is in good shape I'm asking $30 plus shipping and I'm going to have it insured . Thanks Kevin

When going through puddles a bit too fast I usually get quite a bit of water up into the trunk. It's along the entire length. I think the door seal that I have is a bit old and doesn't expand as much anymore. Has anyone ever replaced the seals? Generic or OEM part? I'm in Peru right now and...

Genuine Toyota door seals for a 1974 and later FJ40. These are new in their bags. I have both front door seals and both rear ambulance door seals as a set of 4 in total. $250 obo. Can ship worldwide and contact me for a quote.

Aftermarket ABS front door panels. $75 plus the ride from 97070

I bought some rear half doors from joekatana. Need latches and such. Some I can get from Japan but stuff is pricey. If you have a source please let me know. Thanks

Looking for a pair of strikers for front doors,early style.fj40.Late 60's to 73 or 74 The part I'm looking for mounts on the door itself not the b- pillar.Thanks Kevin

Hey guys, Yesterday while fiddling around trying to get my all my speakers to work (whole different story :rage:) I noticed that I could no longer open my rear door. When pulling the outside handle it seems as if I could not pull it as far as usual and any combo of pulling the outer or inner...

Looking for a drivers side rear door latch with or without lock actuator ASAP. Looks like the spring broke in mine and really need that door to function. Shipping would be to 43230 (OH)

Looking into installing fresh body and transmission mounts on my rig. Hoping to reduce the decibels of noise inside so I don't have to wear earplugs...can anyone provide advice or pitfalls of my plan? There are aftermarket poly and stock rubber-is one material better than another? I'll probably...