diff

Learning diffs on my hj75 1988 troop. I have replaced the crown and in the process of installing new bearing on the pinion. There are a few sized washer shim spacers available between the pinion and bearing in .05mm increments, 11 different sizes. In otramm's video he reuses the factory shim...

I’ve been working on a regear to 4.88s I noticed some pitting on my spider gears and just wanted to check with someone who is more experienced with these. I’m only asking because I’m having a hard time finding/getting the replacements. I attached photos of the spider gears, let me know what...

Noob question but there is enough room for me to work under the vehicle without raising it but I was wondering from a load perspective if it's necessary to jack up the vehicle to install a diff drop?

Doing some research here and can’t find anything on this subject via search. Early 60s, before the transmission spacer was added, have a shorter front driveshaft with a CV joint at the t-case end and a single u-joint at the diff. Later 60s with the transmission spacer have a longer “regular”...

hi, I searched a bunch and found no info on this, so hoping its just a known thing that I dont know. I bought an 85 front fj40 axle to swap into an 82 hj47 troopy to get front disc brakes. I was looking for 60 knuckles to swap, but found this whole axle thats actually for the car for cheaper...

Hi, I'm kindly asking for some help here, because I've been struggling for the last few days. I own a PZJ77 and want to put a rear diff lock in it. Air lockers or Lokkas ... honestly, I don't care anymore. (I believe) my problem with the OEM Semi Floating Axle. It has the 'lock washer' on the...

I've looked around quite a bit and see a lot of threads with bits and pieces for the suggested parts list for a front and rear rebuild. I have amassed the selection of parts outlined below in my Partsouq cart. Does this look like everything I need? Am I missing something or should I just call...

Hey guys, so we've been in Colombia now for about 2 weeks, after shipping the truck from Mexico, we went through some pretty sticky mud in the somewhat dry lakebeds of the Guajira desert and did some dune driving and hitting mountain mud roads. But overall, no real difficult or heavy 4x4. I...

Could someone tell me the torque settings for diff to housing bolts HZJ79 please. Sorry if asked a million times before I can't find them

Heyo, Been researching here and other places. Just bought an 08 Lx570 with 173k miles. Center Diff will not engage. I've tried to engage it several times through any number of recommended scenarios and haven't been able to get it on. My question is, if I can't get it on, what kind f repair...

1997 TLC Factory Lockers w/button and 7-Pin mod done many moons ago Made it a habit to cycle the lockers frequently whenever I was on loose terrain and they always worked as they should :) She's been hibernating since Winter, but I brought her out to play a couple days ago for a trip out...

Hi all, I just purchased my first LC. It's a 1999 LC 100. One owner 173k miles. Just threw some craigslist special Tundra wheels/tires on it that are a little better than the dry rotted tires that were on it. I'm starting to order all of the maintenance parts needed. The gentleman that I...

Hi all, My front driveshaft was hitting a crossmember and needed to be retubed. Another issue this friction caused was some seeming damage to the washer and lock nut of the diff assembly. Curious if I need more parts than just the nut and washer or if there would be need to replace other parts...

Hey I noticed when parking at full lock, at a weird angle on a hill today that my Tire looked super weird, off camber a lot etc. Anyway I looked inside and saw the CV looked like it was popping out, and there's also a leak or something. Planning to replace the CV probably, but wondering if I...

On my rear differential for two trips know when I get home my rear diff is complete loose all nuts backed off? And yes I torqued them lol

Twice now I’ve noticed the line connecting to the rear diff was unplugged. That leads to tell me that the line isn’t long enough at that spot. Can someone refer to me a part to replace that line? It’ll be a good time for me to extend the breather line up higher, too. Thanks!

Complete rear E locker with stock gears (4.11). This came out from a somewhat low mileage 1996 80 series (154k miles) It’s been apart for quite a few years, it worked before putting this to storage. I have the short shaft with the long splines (not pictured) Asking $800 for all plus shipping

Seeking the forum members suggestion for a diff ratio for an LSA swapped triple locked 80 series with a 6L80E transmission. Tire size would be either 33” or 35”.

ARB rear locker and onboard ARB single tank compressor in engine bay have been great. Slee installed so done right. Last week was out and re-pressured tires up as always for the run home. Got home and big pool of oil collecting under front tire - opened hood and source was at the compressor...

Hi, we have a 2010 LC 200, Petrol Auto At the end of June (winter) the Central Differential(CD) warning light started blinking one morning. And each morning, after that. L4 & CD is hardly ever used. Pressing the CD button did not resolve the issue. Turning the knob from H4 to L4 also did...