compatibility

I have a factory front locker. Is the third member for the front diff the same on locked vs unlocked axles? I know the axle housing is different but I would like to know if I can swap in another complete third member. I want to keep my stock stuff and swap in a separate one with different gears...

Is anyone running a Warn Evo 10 or 12 on a TJM T13 bumper? Curious about compatibility and fit. Thanks!

I am new to 45's and have some questions that I feel should be basic knowledge but can't seem to find answers for - I am in the slow process of acquiring things to build a LPB out of parts, I have a late 60's chassis already. I am considering buying one of the Chinese cabs which are 79-84. Will...

Got a 91 that sat for 15 years, bringing her back to life slowly and discovered the truck's missing the Vacuum Control Valve, # 90925-03057 (discontinued for many years). Is there compatibility with 1FZE VCV # 90925-03192 with the 3FE? I've searched and found threads, but haven't found a...

Hi, I have a FZJ105 and I am about to install a H152 box from a 2008 VDJ79. I will be installing a taller 5th gearset. Will the transfer case from the FZJ105 bolt up to the H152? If not is it possible and what must be done? Thank you

Would these fit my LX? In the process of completing the mod to LC suspension. Ad says "Landcruiser OEM springs" but then it mentions 4Runner...? Thanks.

My Sequoia hasn’t wanted to run in 4wd since shortly after I bought it. PO stated he had used it a few days before I bought the truck and everything was “fine”. To be fair, it has a stupid amount of money poured into it (he had receipts for $11,500 USD for suspension, tires, wheels, PM etc...

Are US spec and global spec rear differentials interchangeable?

Good Morning All! I am new to the Toyota world. I have some Jeeps taking up space, but a friend needs a hand and he's got an 85 4x4 standard cab pickup. I was able to find a running 22r for him, but his G52 needs replacing too. They're impossible to find, but I have seen others for sale from...

Hi All, I have a question about compatibility of seat belts between years. I have a 1991 JDM with some questionable seat belts. My driver side belt is starting to fray and it is difficult to get the belt to lock by pulling on it. Basically it takes a lot of sharp pulls and it engages maybe...

Hi guys, I am currently rebuilding my 1HDT motor and my camshaft had a bad wear (water or bad lubrication maybe), I decided to buy a used camshaft and then found that it had a light wear as well: My mechanic said its better to not take the risk. So I decided to get my money back and start...

Hey guys, I figure someone here will be able to give a quick answer to this... There's a great deal on a Icon stage 5 kit here locally for the +2010 4runner/FJ. All parts in the kit match with the 4th gen 4runner kit except the front coil-overs. What is the difference in the front shocks...

Hello all, I recently bought a 95' LC. I was searching the web and really like the "TOYOTA" front grill from 94' and older LC's. My LC also does not have the factory roof rack or sliders. I found a LC that is getting parted out and was wondering if the 94' sliders, roof rack, and front grill are...

Hey Guys, I was just searching the other day and noticed that there are a lot more lift options for the FJ and 4runner than the GX. It is my understanding that all three are similar platforms. Following the same logic, would any suspension lift for the (similar year) for the 4 runner or...

Good evening! I have what I am now sure is an early gauge cluster (speedo to 100mph, gauges are in order of oil, temp, fuel, amm). Also, gauges have a "rounded bottom" vs. the new yr gauges. My temp gauge is not working, always pegged at H, and needs replacement. My question is, will the newer...

I have a running/driving 72 FJ55 with the original F motor and 3-speed tranny. I plan to continue using this drivetrain as long as I can (don't fix it if it ain't broke) but I have access to a very low mile 6.0 with a 4L80e Tranny and the NP246 Transfer Case to go with it. The new drivetrain is...

Hello y'all, I'm just now applying to the site after reading many forums that helped me with my tireless project of fixing up my 78'. So, I have been getting and ordering parts from other vendors and people of craigslist. And I found a windshield that is the same year as my vehicle. However, it...

Just wanted to ask the community. Is the 2h bell housing with a h55f a direct mount to a 12ht? I have the auto in there now on my 89 hj61 but plan on towing this winter throughout the Rockies 8-11k ft passes on a very regular basis and need to have a bulletproof tranny.