bracket

As the title says, I'm in WA. Thanks MUD!

I have the horn (and the hose and bracket) - looking for the clamp. if you have both bracket and clamp (circled in picture) and don't want to separate I will take both. Seeing if anyone has these before I overpay on ebay. (Not my pic but it was easier than recreating a new one)

Selling a throttle cable with its knob in good shape, bracket and mounting bolt off a FJ40. The throttle cable goes in and out with no issues but the end of the shielding is coming undone. $140 shipped

I imagine I’ll have to make some sort of bracket to mount this thing, but I’d like to see some ideas first.

Last winter I was driving through some high coastal winds and my rear wind deflector broke off. The wind deflector itself is fine, but one of the brackets that attach it to the vehicle broke. I was going to just replace the bracket that broke with aftermarket brackets and wind deflector (and...

I have a working light but need the mounting bracket. Late model 40 series. Thanks.

I have only 1 of these. Price and pics are here https://www.cruiseryard.com/new-toyota-land-cruiser-fj80-fzj80-ac-condenser-drier-bracket-pipe-kit/?showHidden=true&ctk=61bfe40f-d5a6-4c2c-98b5-308d91c535f1 New AC kit for the FJ80/FZJ80. This is not all inclusive kit but will get a lot of...

Looking for the steel bracket that is riveted to the frame where the right bellhousing mount attaches. Shipped to 28461. Thanks.

I have a weird situation on my 1987 4Runner air cleaner that I am trying to understand and fix. There's a small bracket that attaches with two screws to the MAF housing. And then, as I see in photos of other trucks, there should a bolt that goes through that bracket and into the air filter...

Looking for at least one to duplicate, ideally two for me and @Akloml Located in the rear hatch. Attached to lock cylinder to block hatch handle. Toyota Part: 69384-60020

Anyone from South America have one of these? 17852-61020 air cleaner bracket, #2

Has anyone every used red line cruisers charcoal canister bracket before below?Just wanted some feedback on it. Thanks https://redlinelandcruisers.com/shop/engine/rl1006-charcoal-canister-heater-mount-1974-1984-fj40-toyota-land-cruiser/

On my 77 '40, US market, LHD, I replaced my slave cylinder and wondered what the bracket mounted in the forward bolt is for. I took it off since I didn't see that it supported anything. Mine is same as this interwebs pic. TIA

I stumbled across this while I was scrolling through GXOR and wanted to share it. I have wanted something like this to hold my winch circuit breaker and was looking to actually have one made until I saw this. https://www.kaon.com.au/battery-fuse-bracket-toyota-prado-150-120-fjcruiser I will...

Came off my 84. $50 plus the ride.

In trying to sort out why the lower hose on my newly installed aluminum radiator is contacting the steering stabilizer, I believe I’ve found one of the culprits. Im fairly certain this truck was in one or more collisions, based on a few things on the front end that are bent or tweaked. In...

Looking for this "L" bracket for the rear of the FJ40 between the air cleaner body and the valve cover. Here is a photo I stole from the internet showing what I am looking for. No rust pitting please :)

Looking for a complete, straight and rust free radiator core support bracket for a 1996 fzj80. Let me know what you have. Thanks

Anyone have one of these sitting around collecting dust?

Hi anyone have this bracket original or aftermarket?