80 series

G'day guys, First time caller, long time listener.. I'm currently completely refreshing my 80 series, 1FZ-FE, and found this at the back of the motor, more specifically, between the flexplate, and rear of motor.. I have checked the flexplate, no visible damage, and checked the starter motor...

Hi guys, i pulled my gearbox recently and made an amature mistake, i put a bolt that was too long for the thread i was putting it into and it blowout on the back of one of the bolt holes, it doesnt look like the crack has gone into the actual case and it kind of circles around on it self like...

Well, the time has come to let go of my beloved 80. I have short/long term plans and need some $ to get started. 80 is a 1993 rhd with 1hdt that has been flawless except for alternator and starter, both of which are still oem, just rebuilt. I wouldn't hesitate to take her cross country and...

I bought these not long ago, with the intention of running them on my JDM 80 series, but other projects on the truck are taking precedent. They are 16x8 -26 offset 2 piece wheels, and a very rare set of 5, they almost always only come in a set of 4. They are made by work wheels in Japan(made in...

How’s it going guys? Looking to trade my factory front and rear locked 94 FZJ80 for a 60 series or any diesel cruiser. Will entertain anything cool. A little about the cruiser below. Have an in depth build and maintenance sheet I’m happy to share. 328k miles. All original 4x4 labs front...

Before I begin researching and attempting to build my own drawer system/sleeping platform, I thought I would check with the group to see if anyone has one they are willing to part with. I drive a 93 Land Cruiser and have no issue removing the backseats. No big deal if everything isn't flush...

I have a lightly used (1,000 miles) pair of Dobinsons rear c97-145VT coils in black. Happy to ship them anywhere in the US with a little help from the buyer. They are located in Bellingham, WA $300 shipped

$400 Bought this manual radiator brand new from cruiser outfitters(paid $580 shipped) as there weren’t any automatic radiators available. Only put about 750 miles on it before pulling it and installing the correct automatic radiator in my 1990 HDJ81. Little bit of dust, a couple dead bugs...

Hi all, does anyone have experience replacing the input shaft bearing in their manual cruiser? Im wondering if its a job I can do my self or not as im not sure if i need to open the actual box up. I consider my self quite mechanically inclined and have manual converted cars in the past and...

Looking to get together, talk cruisers, drink coffee? In the Springfield-Dayton area. Have a 40, 80, and Tacoma at the moment.

I have a 1HD-FTE engine and an 80 series I am looking to sell for the right price. The 80 series currently has a 3FE in it but I can swap it with the 1HD-FTE. It makes sense for me to sell the car for 25K but if I swapped the engine I would want to sell the whole package for 30K. I think there...

Would consider different types of steel bumpers from ARB style all the way down to a tube bumper. Also looking for sliders. I have rerouted the exhaust so that is not an issue. What's out there?

1995 Toyota Land Cruiser If you're looking for a go anywhere and do anything rig this is it! This rig has been my daily driver for ~8years now. It has been a phenomenal truck. It has a new battery and just got the breaks done. Mileage: 286,562 (This is the reading at the time of posting. I'm...

Ordered from Cruiser Teq. Turns out my fj80 is a full float, not semi float. All parts unopened in box. Paid 99.50 plus shipping. Give me your best offer. Pick up in SW Colorado or shipping -buyer pays $12 shipping. Semi-Float Rear Axle Bearing/Seal Kit - Fits 9/73'-1/95' 4x/5x/6x/7x/80...

So a while ago I got my front calipers, brake pads and rotors replaced on my 1996 80, but have just noticed that a small part of the brake pad is sitting outside the brake rotor (as shown in the attached photos). The rotors are 311mm which is the correct size and brake pads are for "90-"98...

Hey team, Long time follower first time poster. I’ve got a 1997 Active Vacation 80 series that sadly had the camping fitout removed before I got it. I’ve got the opportunity to buy an active vacation fitout from a 100 series, is there any way to retrofit this into my 80? I know the boot sizes...

Looking for a 3fe for my 1992 fj80 lower in working condition.. Im located in the Austin area but willing to travel a little ways to pick up as well Let me know if anyone has one thanks in advance

https://bringatrailer.com/listing/1994-toyota-land-cruiser-fzj80-64/ Hey guys! My 80 series Auction ends in less than 24 hours! Check it out! 1 Owner before me, clean true California title. Low Miles

First time poster Is it possible to put a fj62 body onto a 80 series? I’m not just talking about swapping the chassis from the 80 to the 60, I’m talking about just the body of the fj62 and taking off the 80 body and leaving everything there such as driveshaft, engine, fuel system, brake lines...

I have to bad fuel injectors and just wanted to replace them all, during my search for oem replacements i found these oem referbs from GB Remanufacturing on rock auto... What are y'alls thoughts on these, the company or has anyone tried these?