80 series

Recently, I replaced the distributor on my 80 since it was leaking oil into the distributor cap. So I'm a novice and I made a novice move and, though the cap was marked, I took out the dizzy and turned the engine (I don't remember why I did this and I learned my lesson). So I ended up finding...

I am a new 80 series owner and I spend way too much time reading threads on this forum. I acquired my rig in December, 2023. It has low miles (100k) and is in great shape. It spent a good part of its early life in the Midwest, but does not have a lot of rust on the frame or body, as the PO...

This posting is for a long block only. so valve cover to oil pans no accessories. The block has been hot tanked then machined for flatness. Bored .50 over OEM pistons and rings will be installed. New OEM bearings on the rods and crank. The head has been cleaned and checked for cracks. Three way...

NGK NTK 24044 O2 sensor. Made in Japan. New unused. I opened one box just for photos. $150 each, two available.

Brand New Khaki Canvas Dash Protector from Escape Gear of South Africa. $75 + shipping. For LHD 1995-1997 80-Series Land Cruiser. Item in the photos is the exact one you will receive. Part #: A-DP-TLC80-01 Pick up in Milan, OH, or can ship. Shipping Dimensions: 21x12x3" 2 lb 6 oz. I can accept...

Check this out on BAT: https://bringatrailer.com/listing/1997-toyota-land-cruiser-fzj80-161/

-Dealer-installed supercharger -4x4 -Four-speed automatic transmission -Color: dark emerald pearl -Tan leather interior -16” alloy wheels -Michelin Tubeless Radial X tires, ‭275/70R16‬ -Texas title is clean and in my name -VIN JT3DJ81W6S0104399 -Purchased in 2001 from original owner, who bought...

Have a used, but in good working condition factory Toyota CT26 turbo, cast turbo manifold, and intake pipe from a 1HD-FT for sale. 200,000kms on the turbo, was removed because upgraded to a larger G-Turbo. Comes with factory cast turbo manifold and intake pipe. Manifold is tapped for an EGT...

Hey Cruiser people, join SOTEC semi-annual mall crawl in 4LO this Saturday! Where: 6941 Derry Rd, Milton, ON L9T 7H5 Tim Hortons · 6941 Derry Rd Building B, Milton, ON L9T 7H5 - https://goo.gl/maps/KkJWQzwnMzHfJ7jd8 When: Saturday, October 5, 2024 @NOON (12PM\12:00) What: coffee, truck talk...

C59-166 - Linear Rate - 2.5" with stock front weight or 2.0" with 220 lb load. Set of 2 - left and right spring. https://exitoffroad.com/product/dobinsons-front-coil-springs-for-toyota-land-cruiser-80-series-1990-1997-2-5-lift-no-load-2-0-with-up-to-220lbs-load/ In decent shape. Most paint is...

Since i bought my LX450, i did a lot of work on it. The HVAC will be charged either today or tomorrow with new freon. I am curious if anyone has had to add additional fans to keep the radiator and the condenser cool. The motor has 279k miles with at par compression levels but i am not...

Have a good working 94 Fzj80 ECM, pulled from a running truck. Purchased along with the engine and wiring harness. $250 plus shipping thanks Wes

Oh man.. I have been looking for a "Poverty Pack" 80 series for over 4 years now. The biggest thing I wanted was no sunroof and no opportunity for leaks or rust as much as possible. I finally found for a 1991 FJ80 without a sunroof. It also was factory flawless which is nice. Interesting enough...

Off market

Hello mates, I have recently bought a HZJ80 with triple lockers. I have Koni Raid Shocks of my ex-76 Landcruiser, which I sold. I just want to know if I can use those shocks for my 80 series Landcruiser.

I have a rolling frame from an 80 series that had 170k miles. Frame has no rust & includes a clean CA title. That was serviced by the dealer 90% of its life. No drivetrain or steering box. Few other small things missing but ready for a new home. Looking to sell complete but will sell axles &...

Located in Vancouver, BC Canada. I am selling a pair of 94+ manual front cloth seats in the gray color. The foam has been recently refreshed so it is very supportive. Very good condition no major tears. Driver seat has stains on the rear of the seat, and is missing the reclining plastic trim...

1996 80 Series Land Cruiser in beautiful condition. Body has been Totally Restored, No Rust Anywhere. Triple Locked with 7 pin mod (allows locking the center diff independently). Old Man Emu 4” Lift, 4.88 gears, Rock Sliders, Slee Skidplates. Borla Stainless Exhaust, K&N Filter, New Magnaflow...

Hey guys- I've got this ad posted in the "body parts" section as well, but figured it may see more appropriate traffic here in this section. I have a pair of outer mirrors for a RHD 80 series here because I'm a dumbass. PN 89740-60350 and 89710-60410. I bought them in July from Partsouq, not...

Hi, apologies if this is a 'noob' question. New here! I've done some research and I know these 80-series hold their value, but I was wondering if anyone had some more insight if this is a good deal or not. Current owner only drove a few thousand miles. Carfax reads 5 owners and 25+ service...