3fe

91 fj80 3FE motor comming out. Ive got access to the motor mounts, when i remove the bolts from the trans bracket everything ( motor, transmission, transfer case, drive shafts) moves. So its time to hoooker up and need to know if is easier to remove intake or if i can do it like this( pics)

Hello Mud, I took off my spark plugs from my 92 3FE to see what condition they were in and see if everything is normal. What prompted me to do this was coolant loss so I want to triple check its not HG failure, before replacing everything in the cooling system. These plugs were put in about...

Just wondering if anybody knows the size of the bottom alternator mount bolt nut on an FJ62? Mine is missing and I also have a rattle noise that goes away when I push on the alternator tensioning bolt. Could that noise be caused by missing that nut? TIA

All items can be shipped at buyers expense. Cold Start Injector $50 Power Steering Pump $60 - spins freely and feels like it works, but not tested Air Switching Valve $40 Lower Thermostat Housing including hot water sensor $75 Master Cylinder $45 Oil Cooler System $75 Disregard picture of...

My head is cracked, machinist says it's too big to repair. Anyone got a good head? Willing to drive pretty far, or arrange shipping. If the head condition is unknown (not-magnafluxed for cracks) I'd need a very low price, or assurance that you'd be willing to refund -b

PRICE REDUCTION $100. This has some small fine cracks on the wheel surface but otherwise really nice! It came from a well kept 1994, but is same as used 1991 to 1994. If interested, please send a Personal Message

Hey, was wondering if anyone has any 2F/3FE (for 3FE but they look the same) valve adjustment screws and nuts kicking around that they’d sell. Can’t seem to find any and I ruined a couple while freeing up stuck lifters.

I am looking for a replacement thermostat housing for a 1988 3FE if anyone has a spare and is willing to part with it for a reasonable price. I'd like to have the upper and lower plus the bolts if possible. Thanks! Josh

Hey all, I've been wrenching on the FJ80 a bit doing some PM/chasing a hard start problem. The problem I have is when I crank the engine, it will turn for what seems like a long time(~5 seconds), and then when it turns over, it will sometimes act as if choked. Like you put carb cleaner in the...

I've read a bunch of threads but none of them seem to mention my collection of transmission "issues" - trying to determine what is normal vs what I should take it to a shop to get worked on. I have a '91 full time 4WD which I understand is the A440F auto transmission with ~247,000 miles on it...

Started over a year ago. 91 with 135 on the odometer. I have complied a spread sheet of all parts and prices paid for items I have replaced or upgraded. Enjoy

I have a 1991 FJ80 with the 3FE. I recently found out I have a bad alternator. And it is no longer in production. p/n 27060-61091-84 I removed it, and purchased a re-man alternator. p/n 210-0177 Found out that the mounting holes on the new alternator are too small. suggestions?

$300 Each or $800 for all 3. Removed from a 1991 Toyota Landcruiser FJ80. 220k Miles on ODO. Engine had head head gasket fail. Transmission and Transfer Case are in Good working condition. 3FE 4.0L I6 Engine, A440F 4 Speed Auto Transmission and HF2A Transfer Case. Located in Laughlin Nevada...

First off, I'm so sorry. This was all bottled up inside and I think you guys are the only ones that will understand ... I own a 1988 FJ62 for about 15 years. I love the thing so much. Moved to Colorado from Florida and began to question the truck. It's unstoppable, but a DOG in the hills. It's...

Toyota Landcruiser FJ80 3FE 4.0L Engine and transmission. 220k miles on the ODO. Engine had a head gasket failure. A440F Automatic 4 Speed Transmission is good with no known issues(Untested) Located in Laughlin Nevada. I would prefer not to ship but i can if needed. Any questions feel free to...

I recently changed out my TPS because of throttle issues I was having and now at idle the motor surges up and down. When I go to give it gas I get no response. Tried to find the settings from the FSM but was unable to find a clear answer on that. Any tips would be greatly appreciated.

I have a 1991 LC 80- with the 3FE installed. 4 push-rods broke and are lodged in cylinders 5 & 6 I think. The motor is seized and will not crank over, but still has many good parts. I also have the A440F transmission which leaks a little fluid but works fine. Let me know what you need and I can...

I have a 3Fe engine block that came from a FJ62 Engine had 220k and was running. Crank, pistons still installed. The head and bolt on accessories have already been used for other projects. The block is sitting covered on a pallet, it is good for a core for rebuilding your engine or? First $225...