3b

Hi all, 1. ENGINE: Can some please confirm if this the attached pic indeed looks like a 3B engine from a 1989 BJ.75 Troop carrier? Also, why some engine components look like red/rust colored? 2. NO H4 BUTTON: On the 89 troopy, would it be normal to NOT have the H4 button on dash?

1984 FJ60 Toyota Land Cruiser Clean California Title Current Registration just paid Titled as Diesel 3B Swap H55F Trans 188,818 miles*** on the Clock No idea as to where this car started its life, where its been, or who did the work on it. Found a this awful old ad of this car for sale here...

Toyota Diesel 3B Engine 24V 180,000 km Aftermarket Turbo installed <5,000 km ago (will include 2.5” downpipe) Rotary Pump Block Heater Oil pressure is good No smoke unless you really turn up the fuel screw A/C - dead clutch Runs really good. Engine is still installed in Landcruiser BJ73, can be...

Hey guys, I'm going to be selling my 1990' BJ75 LHD 5-speed soon and I have gathered about 80% of the AC parts, but won;'t have time to gather the rest prior to sell. Willing to sell them now, otherwise will offer them to whoever buys my truck. I have the last known brand new OEM Toyota 24v AC...

Hey Guys, I was going to turbo my 3B but have decided to go a different direction. I have a brand new 13B-T Turbo Manifold. Toyota stopped making these years ago, but I have a contact who has been reproducing these for years to OE specs. Pretty sure it's the same manifold that all of the...

Hey guys So im the proud owner of a 12v 1982 bj42. For the last 4 months or so ive been having a few issues with it. Ive tried multiple times to fox it and everytime i think i have but then 2 weeks later the gremlin is back. So whats happening is basically it wont idle smoothly. As if its on 3...

Hey guys So im the proud owner of a 12v 1982 bj42. For the last 4 months or so ive been having a few issues with it. Ive tried multiple times to fox it and everytime i think i have but then 2 weeks later the gremlin is back. So whats happening is basically it wont idle smoothly. As if its on 3...

Needhelp people Did look around this forum , and try few tricks but only helped for awhile This is 1987 Toyota Troopy 3,4 3b with 270.000 km on the clock Got it 10 monts ago, truck was running fine, did simple maintnance ,fresh oil, new filters, replace all gear oil, front back axles, TC,gear...

Hello, My 1982 BJ42 has sprung a coolant leak at the water pump. I found this pump: Water Pump, 81-88 BJ4# 60 FJ7# B 3B 13BT DSL With Fan Clutch Any other pump or part supplier I should consider before placing an order? (I just emailed them asking if it comes with a gasket.) -Jay

Hi guys, I have a cooling issue with my 3B in my BJ42. The issue occurs be the ambient temperature 70F or 95F. Upon first start, the engine will happily idle at ~185F. However, as soon as I hit the highway doing 60mph, it’ll sit at 230F. Things I’ve noticed: 40mph => 200F 50mph => 210F...

Evening everyone, Cross posted here to hopefully locate something. In need of a 3b cylinder head shipped to 93442 morro bay California. Or I can arrange pickup pretty much anywhere in California. Thanks everyone Cheers, -Joe Rawson JoeRawsonSLO@Comcast.Net Wanted - 3b cylinder head

In need of a 3b cylinder head shipped to 93442 morro bay California. Or I can arrange pickup pretty much anywhere in California. Thanks everyone Cheers, -Joe Rawson JoeRawsonSLO@Comcast.Net

Evening everyone, I recently came across a FJ60 with a 3B and H55F swapped into it. Motor wouldn't start and had very poor compression. After pulling off the head it appears to be cracked pretty badly. From my understanding all the pre cups are cracked along with that all 4 chambers have cracks...

Hello everyone, I have the Ford Contour fans mounted and wired up to a relay (so I have the power wire, ground, and acc. wire coming out of the relay). My problem is finding the best way to switch the fans on. The kit I bought came with a probe, but I have a brand new Champion all aluminum...

Hi, I'm looking for a p/s pulley (with spacer would be great), the pump bracket and idler pulley for the 3B engine of my 1983 BJ42. Any offers by PM please. regards Jan

I have been looking at 3B threads regarding where to tap oil pressure/oil feed from for a turbo. at the moment all i want is a second oil pressure gauge and future oil feed. a lot of threads are for 40 series where access is available to the factory blanked plugs forward of the stock oil...

In search AC bracket and idler(pulley)/bracket assembly for a 3B future project. Please PM / post pictures. Thanks Ernie

Not really tech, but some more active have probably seen how much a complete 3B engine is worth. I have one, if i recall around 150,000km with a 4spd. We ran it and it ran fine. I'll be looking to sell it.

Last year we did some big closeout inventory buys from AISIN. Some of it was stuff they planned to discontinue in the US market and some was stuff they simply had way too much of in the US market, either way if it fit a Land Cruiser or Toyota 4x4 we bought it all. I ended up with a bunch of...

2B/3B SALE PRICING :cool: Part# CL3BEKIT (Fits 8/80-10/84 BJ41/BJ42/BJ44 2B/3B Diesel) - Sale has ended, now $227.50 Part# CL3BMKIT (Fits 8/80-09/89 BJ6x/7x 3B Diesel) - Sale has ended, now $227.50 We stock clutch kits for most gasoline and diesel application Cruisers, learn more here...