Hello all. Starting to kick around the idea of buying a 1st gen tundra and was curious if there is a Newbie buyers guide somewhere like Slee has for the 80 and 100 series. Things I know of are...
Frame rust and frames that have been replaced. I am skeptical of a truck with a replaced frame as I...
Last weekend we finished building our Hard Top hoist (special thanks to Illzoni's post on T4R Hoist for 1st Gen Topper - Toyota 4Runner Forum - Largest 4Runner Forum):
I then loaded up the family to celebrate and get ice cream...and quickly became jealous of the kids in the backseat with full...
1986 4runner Automatic
Installed a budbuilt crossmember that didn't exactly fit correctly, so he shipped me spacers and it required 2 to remove the interference with the bottom of the case. Now, I'm stuck in 4WH and the shifter but it into 2WH or 4WL. The shifter moves but feels as if its...
I just tired to find a good spot to mount the marine folding cup holders in my '87 4Runner SR5 tonight that I got off Amazon but no luck.
I have a 80 series Land Cruiser and bought Slee's cup holder that fits in the useless pocket thing that works similar to an ash tray.
Does anyone make...
Hi, I am new to the 4Runner forums and just picked up a pristine ’87 4Runner SR5 Turbo from TX a week ago. We currently have 80 and 100 series land cruisers, but I wanted the 4Runner because it is light, nimble, and we can take the top off our kids.
After getting the new 4Runner, I started...
I've done a lot of research on soft top options for my '87 4Runner. Here is what I came up with:
1) Killer Toy Tops - $900-$1,000 with lots of color and setup options. Rigid frame design that can hold a roof rack (wish I had a pic of one with a rack). Sides zip off and many use factory rear...
I just picked up a nice '87 4Runner last weekend. It has a TG rear bumper that seems very well made, but no tire carrier. If I sell the TG, what options exist for a nice rear bumper with a tire carrier for a 37" spare?
Pic of my current setup below:
Would love something with a similar tire...
Figured I would start a pic thread for these as I have not seen one listed. I'll start with some of my previous rigs.
2000 taco 2.7 4wd with basic spacer lift, diff drop and 31x10.5-15 bfg all terrains.
96 4 Runner Limited 3" toytec front coilovers with ome 890 rears and diff drop 265x75-16...
Anyone upgrade the rear springs to some "better" but keep the OE height?
I'm not really interested in lifting the rear, but would like better load handling/droop performance.
The truck is in Laurel, MS, but I drive to Tupelo, MS on some weekends. So anywhere around those areas would be an easy place for someone to come take a look and drive.
$7000 (PRICE IS NEGOTIABLE)
I'm selling my beautiful 4Runner. This thing is one of a kind. It has the FACTORY SOLID AXLE, a...
Located in Houston, TX. You pay shipping.
All of these parts were removed from my red 1985 first generation Toyota 4runner 4x4. Parting these out.
Have a set of 4 wheels that I removed that you can find by searching my other ads.
Parts are all in decent condition. Wear and tear on par for a...
Solid runner and very reliable.
22re 5sd 175k, cold ac, 3" blocks in the rear, torsion bars tuned up in front. 33" km2s 95%, very little rust. Only one tiny spot if through rust in the door jam at the bottom of windshield. A few other spots of surface rust but nothing major.
Dings and...
I have a complete dash for a 1st gen 4runner or 84-89 pickup and the Alti Meter.
Dash is $150 Alti Meter is $100 + the ride. I am in Louisiana zip 70447.
Both are Gray.
I have a 1983 Pickup, 4wd, longbed, 22R, 4 inch lift. The current stock mirrors serve little better than dental mirrors would. I'd like Land Cruiser door mirrors (taller design) with a: 2. 3/4" bolt spacing, same as existing mirrors. Where might I find these? BLACK.
Also, I have no wind shield...
started the new truck project recently.
scored an 89 runner off craigs for 500$
it was a 3.0 auto in its previous life.
plans are the 3.4 V6, R150 5 speed an twin mini cases with 4.7s etc.
like all good builds i skip past all the boring grinding stuff and spare any pics of the poor old IFS...