LX450(80 series Land Cruiser) rear bumper corners and step plate.
Includes left mudflap and broke right mudflap if you need a full left, or want to trim the left to match the right.
Have the...
Up for sale I have a used TJM front bumper for an 80 series/LX450.
Structurally it's in good condition, has some surface rust and the paint is peeling a bit so it could use some cleanup.
Came...
I have parts from two Toyota trucks. See list and price below.
1991 FJ80 Toyota Land Cruiser
OEM Mud Flaps (4) $150
OEM Tie Rod (bushings shot) $50
OEM Drag Link (bushings shot) $50
OEM Charcoal...
Pair of front Fox 2.0 Performance shocks, sat for about 4 years, installed, driven about 20 miles and then one side developed a leak. Installed another new pair.
$300 for the pair plus ship.
Pair of Bilstein 5125 shocks, installed on the rear of a 80 but taken off after only a few miles. Too soft for a built truck with rack, swing out, drawers, etc. for a more stock 80 without...
FOR SALE: 1992 Toyota Land Cruiser HDJ80 LHD
Location: Springfield, MO, USA
There is a lot to list on here. I have specifically made a website to host the 100's of photos and the...
Stock coil springs off my 80 Series Land Cruiser, Front and Rear. Good shape, but I went with a lift. Located in Reno, NV. Must pick up, no shipping. FREE
Also have some KYB Gas Adjust Shocks...
Looking for a 1HD-T to rebuild and swap into my 60... Either runnner or rebuildable core w accessories are fine. LMK if you have anything or expect to (i'm in no rush). THX
Looking for a wholesale auto valve body for a 90-92 1hdt with cruise control. Or a stock valve body from the same trans I can have them build
Must be a full hydro a442f
Looking for an FJ80 (3FE engine) alternator. Must be an original Denso core! Non-working but rebuildable is fine. I'm NOT looking for an FJ62 3FE alternator. I'm located in Denver, so willingness...
Hey all, looking for some locked 80 axles (arent we all). Im located in denver but id drive pretty far to get them for the right deal.
Would prefer all and complete harnesses, but not required...
Driver side rear sliding window for an 80 series. Will come with a brand new OEM seal
Frame is in great shape with no rust just some surface corrosion that comes right off
Weld on AR500 rock rings for 80 series axle drain plugs. Welds over existing / factory rock ring to replace or reinforce the factory unit. Features chamfer to clear factory weld. Thicker and made...
1997 Toyota FZJ80 Landcruiser
Up for sale is my 1997 FZJ80 Land Cruiser. I built this rig out for overlanding, but my needs have changed and I’m transitioning to a minivan since my family is...