2KCruiser
Everything 2KRacing, practically live here
Groovy
Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
Im not one to stress over paint, but I do want to retain my cladding as long as possible to avoid all those holes.Awesome videos! That rig is too damn clean. You need to wheel with me, that will remedy your super clean look! Haha
Im so close to permanently removing it.Have you tried driving on the road with the front sway bar removed completely? It might not be that bad.
After reading so many posts about dealing with the LX "holes" I think that I would weld a piece of sheet metal over the entire area.Im not one to stress over paint, but I do want to retain my cladding as long as possible to avoid all those holes. I'm thinking at that point I might go to a wrap, you know the sticker kind of wrap... just thinking about it.
I would like to go play in your backyard the Rubicon with you... someday hopefully soon.
View attachment 1294629 View attachment 1294630
Thanks for the compliment, I really dig your rig & what you have done with yours.Damn! Let's see it on flat ground. How do those springs ride?
Thanks for the compliment, I really dig your rig & what you have done with yours.
I have not taken a flat ground pic yet because it sits up higher in front, I'm still waiting for the coils to settle down.
As far as the ride it feels plush in straits & firm in corners, the dual rate coils are the way to go. The 160 rate on top is like a stock ride while the 260 rate on bottom is a welcomed firmer sporty feel from the softter 220 rate of the OME 851 I had.
With all the changes I've done to my rig I totally agree with the sway bar comments, these piggies need all the help the can get in the handling department.I would put the front sway bar back on. Had mine off for a couple months because the axle mounts tore off. It's fine in town but it is pretty worrying whenever I have to slow down fast or from high speeds. I have to steer to keep it from leaning sometimes. Highways are awful, it is almost impossible to keep straight... Just my input.
I would put the front sway bar back on. Had mine off for a couple months because the axle mounts tore off. It's fine in town but it is pretty worrying whenever I have to slow down fast or from high speeds. I have to steer to keep it from leaning sometimes. Highways are awful, it is almost impossible to keep straight... Just my input.