Jumpers now available HERE just a click away
$5 Shipped
Good chance this is posted somewhere but I was unable to find so if it a repost
Wanted power to my windows and sunroof without the need of the key on.
3 step process once the drivers side kick panel is removed.
Step 1 - Remove the relay (noted by arrow) just pull
.
Step 2 - Make spade jumper
.
Step 3 - Install jumper as pictured
Now windows and sun roof work without key on
I tested for a phantom load and measure less then 1 watt = no problem
I'm sure there are a bus load of nuns cringing somewhere but I don't care
New added bonus feature see post #76
Edit: Phantom load of <1watt has been located.
If you rarely drive your 80 this could of discharged your battery over a 3 week time period. By removing the lamp for the auto down button you can eliminate the <1watt load if it was an issue. Not sure how I ever found the button in the night.
$5 Shipped
Good chance this is posted somewhere but I was unable to find so if it a repost
Wanted power to my windows and sunroof without the need of the key on.
3 step process once the drivers side kick panel is removed.
Step 1 - Remove the relay (noted by arrow) just pull
.
Step 2 - Make spade jumper
.
Step 3 - Install jumper as pictured
Now windows and sun roof work without key on
I tested for a phantom load and measure less then 1 watt = no problem
I'm sure there are a bus load of nuns cringing somewhere but I don't care
New added bonus feature see post #76
Edit: Phantom load of <1watt has been located.
If you rarely drive your 80 this could of discharged your battery over a 3 week time period. By removing the lamp for the auto down button you can eliminate the <1watt load if it was an issue. Not sure how I ever found the button in the night.
Last edited: