Why ih8-4inchskyjacker

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Sep 26, 2005
Threads
38
Messages
1,824
Location
Port Orchard, WA
Website
www.projektenterprises.com
This is why I'm going SOA next month unless someone can come up with a compelling reason to want this.

dscf4181.jpg



Also if anyone is interested when my SOA is finished these springs will be for sale. The passenger front spring did hit a rock once and is SLIGHTLY scratched. I will get a pic of that later. Anyone interested in the springs start the PM line now.
 
you not liking the excitement? :rolleyes:

I can do the same thing pretty easily - rarely bothers me :flipoff2:

it's a short wheelbase vehicle, after all ;p

BTW your shackles look shorter than stock to me
 
they sit at 90* (straight up and down) or damn close while at level rest. any longer and they'd be over 90. I love the excitement but it sucks when you're trying to get flexed for poser shots lol. there's just not enough flex in the 4" for me and the ride is way too stiff with the shacles needing to be so short/at the angle they sit
 
Hi All:

I'd suggest trying to remove one or two leaves from at least each rear spring pack to get more flex. Also, it appears that you are using stock rear shackles - some longer ones, like two inches longer than stock would probably work better, allowing more droop potential.


Regards,

Alan
 
How long have those springs been on there? Sounds like they're not broken in yet to me. Have 4" Skyjacker springs on my 40 and have loads more flex than that. Heck, the springs are so soft now I had to install longer shackles and an add-a-leaf to keep the back of the truck up. If they've been on there a long time without moving then the bushings might be rusted to the spirngs and pins. This means the springs can't move/flex as designed. You might also want to pry the spring clamps open a little to let the springs slide around better in each pack.

In short, I think the Skyjacker springs work well. Might be a few issues in your install that need a little attention before condeming the spring...

HTH,
Nick
 
Nick,
Thanks for the info. There are other reasons but this is part of it. I also like the extra ground clearance and other available options for the SOA vs SUA. I may try that advice to make the ride better in the mean time.

Pry the spring clamps is that those pieces that go around the spring to make sure they dont get too far apart?
 
I had rear Skyjackers on my 40 and thought they were OK. They are fine with no load. I got rid of them to get custom springs with more load carrying capacity. It does help to run a longer shackle. I'm going SOA this off season as well, using stock springs up front and FJ60 rears in the back.

It looks like you have some rust issues as well.
 
LC_Hamma said:
Hehe, yep I got rid of those 4" Skyjackers in favor of a tri-link design. SOA will put your COG too high IMO, so link it out dude.
SOA is cheaper and works fine for my friends. When I have the kinda money I want to do a 4-link and big ol coils and make it a full on trail rig but i'm not ready for that kind of investment.
 
you do need to resize for a better idea of what it looks like, but i had good flex with mine. now that i have an soa 40, i'd do skyjackers again first. i'm not a hardcore wheeler though, so i don't need the extra height. 4"/35's is fine for me and the skyjackers were very comfortable. when i ahve the $, i'll be going to a small shackle and pulling leaves in my stock pack to drop the soa.

doesn't look like it, but are you sure your shock isn't limiting the droop?

how about brake lines, are they long enough?
 
I've run the 4" skyjacker springs for a number of years.

Beat on them very hard, and never had a spring invert or cause problems.

I run anti-inversion shackles, and I broke them in properly. (flex it out and let it sit for awhile, then flex the other direction and let it sit.)
 
projektdotnet said:
Nick,

Pry the spring clamps is that those pieces that go around the spring to make sure they dont get too far apart?
Yep, those are the spring clamps. No need to pry them completely open. Just open them up enough to let the springs slide past each other easier.

The folks I used to ride with liked the Skyjacker spring but we usually used a different shock. The old Warn Black Diamond was most popular at the time. Not sure how the current Black Diamond brand shocks compare to those though.

HTH,
Nick
 
the best thing you can do is ditch those skycrappers and go soa



no other way
 
jcj_78FJ40 said:
Anybody running Hypershackles with a 4" lift?

If nothing else, it seems like it would greatly improve shackle angle.

http://www.off-road.com/tlc/reviews/hypershackles/images/hs_06.jpg
I ran with a guy two weeks ago that ran Terra-Flex shackles on all 4 corners with 4" springs. Loads of flex. He trailers it now but he drove it all over western US for 8 years before that. Said it handled fine on the highway.
 
Buying the Springs for SOA tomorrow and also picking up a drop in front axle that has all new seals,bearings,etc and Mini-truck knuckles :D
SOA cost to date:
Springs&Axle: $300
Steering Arms/Rods:
Perches:
Anti-Wrap Bars:
Extended Brake lines:
Rotors&Shoes:

Total Cost:
Will keep this thread up to date as best I can
 
Back
Top Bottom