Why ih8-4inchskyjacker

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Looks to me like you are hanging off your brake lines:eek:
brake.webp
 
I would think if you're willing to put the time & effort into going SOA, you'd at least want to put in a little time to investigate your existing setup first to see what your limiting factor is. If you're set on SOA that's cool (I did); but IMHO, whatcha got should be able to work a lot better than it is now... with a _lot_ less work & $$.

Disconnect your shocks & flex it out (AFTER you've checked your brake lines aren't the limiting factor!!! :eek: ). Several good suspects have been mentioned: short/bad angled shackles, poorly mounted or short shocks, short brake line, rusted bushing/pins, tight spring clamps, too many leaves, etc.

Good luck whatever you choose. -Ed '70FJ40
 
i think one thing alot of people overlook is that when your bolting and tigthening everything up.
the rig needs to be at rest.meaning all the weight of the rig is on the suspension and tires.
not on jack stands or a lift.

this is when you need to do a final tighting of all nuts and bolts.
otherwise you will preload the suspension.
and do not crush or deform the bushings.

good luck with this,fix that brake line

i had a 2.5 skyjacker lift for 5yrs with good results.
now they are part of a hybred spring pack with fj60 springs ;)
 
Cruiserdrew said:
It looks like you have some rust issues as well.
Really :doh: it's amazing what only your hand will do to a rusted sill
dscf4198.jpg

dscf4199.jpg


Formerly the OEM Lower Tire-Carrier mount
dscf4203.jpg


SOA update:
Steering arms are on their way and I purchased Ubolts and perches from Kurt today (err by mountain time i guess it was TECHNICALLY yesterday) Great Vendor and had my parts ready when I got there then we proceeded to chat for a minute before he had to run off on other customer's stuff. THANKS AGAIN KURT:cheers: http://www.cruiseroutfitters.com
 
Back
Top Bottom