WE NEED GEARING!

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

they already make an adaptor for the 1fz for the atlas. to tell the truth, I would rather go with an atlas than dual cases. KISS method is always better IMO

Where and how?

Don’t know why you guys are opposed to dual cases. I love mine and I’ve know of people with over 200k on there’s without a rebuild. Just have to make a couple of driveshafts and that 4 speed x2x2= a semi.
 
Theirs no adapter for a Atlas in a 80 with the stock trans.
 
I did a quick search. Supposedly if you have a 343f trans you can adapt a atlas to it. Here is what I found in quotes from another member in another thread...
"Absolutely is a way to make it work with the 343f. Buy yourself the output shaft and tail housing from the AW4 Cherokee auto. Swaps right into the a343f (requires a tear down to swap), and then you can use any one of the clockable novak, aa, etc adapters for an AW4 to a dana 300, atlas, etc. Dana 300 (super light and strong, lots of upgrades, 4:1) would be an awesome swap and half the price of an atlas."
Quoted from @txlonghorn


If this is correct, with a little work and finding the right parts you can have all the low gearing you want. The center output from my experience isn't a big deal unless your driving down the autobahn at like 150mph.
 
Interesting, Still leaves us A442f guys out.
 
I did a quick search. Supposedly if you have a 343f trans you can adapt a atlas to it. Here is what I found in quotes from another member in another thread...
"Absolutely is a way to make it work with the 343f. Buy yourself the output shaft and tail housing from the AW4 Cherokee auto. Swaps right into the a343f (requires a tear down to swap), and then you can use any one of the clockable novak, aa, etc adapters for an AW4 to a dana 300, atlas, etc. Dana 300 (super light and strong, lots of upgrades, 4:1) would be an awesome swap and half the price of an atlas."
Quoted from @txlonghorn


If this is correct, with a little work and finding the right parts you can have all the low gearing you want. The center output from my experience isn't a big deal unless your driving down the autobahn at like 150mph.

Anyone on this board do this?


I have a 343 sitting on my shelf that I can break down. Don’t know when I’ll have the time but can prepare the swap and see if it’s feasible.

1. Output shaft
2. Dana 300 with 4:1 gears
3. Driveshafts

Am I missing something?

Would you provide the link for the info on this swap?
 
Anyone on this board do this?


I have a 343 sitting on my shelf that I can break down. Don’t know when I’ll have the time but can prepare the swap and see if it’s feasible.

1. Output shaft
2. Dana 300 with 4:1 gears
3. Driveshafts

Am I missing something?

Would you provide the link for the info on this swap?

So, I'm onboard but have no cash to buy parts with, but I can draft up anything you want for an adapter plate with CAD and send out for quotes to local shops for you. I can probably dig up the advanced adapter components your referring to as well.

So if you want to pull things apart. Have a decent set of digital calipers and can get measurements, I can help you with the adapters. But I'll be putting on you to do the rest of the work, in terms of disassembly, purchasing and assembling.

If this is an appealing proposition let me know in this thread and send a PM, I'll do what I can to help.
 
How much would someone pay for a doubler? How much would someone pay for an atlas? I have seen plenty of people say they want these things but how much are people willing to pay? Just curious.
 
A regear already cost around $2k and people do that all day.

In all seriousness I’d pay up to $3-4K for a lower range gear with all adapters and t case, all I do is bolt the damn thing on.

I’d even eat the cost for the new driveshafts.

I mean common, people spend $40-$100 k on their jeeps and our land cruisers are just as capable. What did we spend $5-20k? What’s another $4k? To make it that much more capable.

And in all honesty, gearing actually can save your drivetrain, tranny isn’t working that hard, engine’s torque just increased tremendously, it’s a win win.

I just bought beadlocks not for the look, but for the longevity of having true and straight rims after a trail. I can’t tell you how many wheels I’ve needed to balance/replace because of what I do on the trail. So yes it was a longevity investment that I was willing to take.
 
I would really like to see a 1FZ to NV4500 adapter. Seems like a simple and possibly cheapest solution to gear an 80 down. You’d just have to learn how to drive again.
 
A regear already cost around $2k and people do that all day.

In all seriousness I’d pay up to $3-4K for a lower range gear with all adapters and t case, all I do is bolt the damn thing on.

I’d even eat the cost for the new driveshafts.

I mean common, people spend $40-$100 k on their jeeps and our land cruisers are just as capable. What did we spend $5-20k? What’s another $4k? To make it that much more capable.

And in all honesty, gearing actually can save your drivetrain, tranny isn’t working that hard, engine’s torque just increased tremendously, it’s a win win.

I just bought beadlocks not for the look, but for the longevity of having true and straight rims after a trail. I can’t tell you how many wheels I’ve needed to balance/replace because of what I do on the trail. So yes it was a longevity investment that I was willing to take.
I think a dana 300 would be a great option to try. U can get a junkyard one for cheap to experiment with. Im sure if u make it work 1 or 2 dozen or so here would like to do it too. As far as an adapter to just buy, while none are available, a good fabricator can make u a adapter. Superbuick made one for his fj40 ih the hard core section if I recall from scratch. Didn't take him long either. He drives his rig all over the place.
 
Back
Top Bottom