WE NEED GEARING!

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Mar 28, 2010
Threads
136
Messages
813
Location
FOG TOWN->SF<-
I’m a rubicon regular and have been taking my 80 there in the last year 3 times out.

This past weekend my crawler, 88 sas 4runner’s suspension was finally “adjusted in” and man can that thing crawl! Dual case 4.7 rear, 5.29, 37’s and is one of my daily’s. It’s funny but I did do one more obstacle than my friends completely built long arm, Detroit locked, 38 TJ. Which now I have bragging rights. Lol.

But man what gearing does to the complete experience of crawling. Even with my 4.88, 3.11 transfer case my whole rig shifts side to side, banging around uncontrollably with just your brakes to save your arse.

ENGINE BRAKING IS KEY TO CONTROL THESE BEASTS!

My question is there is a market out for this and why can’t it be done? I’d be be happy with a 4.7 or higher in the tcase. Shoot they clocked tacoma tcases, why can’t they cloak a tcase to fit around our big arse gas tanks? Sure you’ll loose the sand abilities, but it would crawl lika beast.
 
I like where your head is at.
I'd be all for it, but i'm not holding my breath.
 
It's the same answer there always is for these rigs. There simply are not that many out there to justify the high time and $$$ commitment the R&D a project like this would take. In order to make a profit on a project like this, the company who undertakes it would have to charge a very high price tag that not many people would pay. As a company, if you actually want to make a profit and keep your doors open, things like this are at the bottom of the list.

Maybe we should just ask @NLXTACY since he considers profit a dirty word :rofl:
 
Likely not a big enough market. If u put a LS motor in u can install a atlas.

Not a big enough market? You ever go to a rubithon all wagon run? Or even see how many outfitted Fj80 are out on the road that look like they crawl?
There are a sh!t load.

$1200 for hell fire knuckles, which were sold out last time I checked..... comon, market?

It’s more like the companies that are raking in all the doe from “overlanding” mcygyver stuff, can’t put the innovation in something we really need, GEARING!
 
Most folks are interested in putting makeup on their pigs, not install a bionic leg.

That said, I’d be interested in a dual case if one was available. But I doubt it will ever come to fruition. Reason is because it’s a lot more needed then just an adapter and case. Things like the fuel tank has to be relocated/ replumbed, new rear driveshaft...

The 80 is a large, heavy platform. Import numbers were small. It performs a wide variety of roles well, but for specific purposes like rock crawling there are better platforms to choose from that already have an established market built. E.g. pickup, taco, T4R
 
I'm definitely not as hard of a wheeler as you are. IMHO, the 80 is fat, heavy pig. Don't get me wrong. They wheel awesome for what they are. But for extreme wheeling, I would start with a different platform. Of course, you could throw out all the drivetrain and put in something else. Still wide and heavy and no longer a really much cruiser left in it. Again, JMHO.
 
Okay, I don’t mean to offend the soccer moms. BUT.....

We need gears to fully use its capabilities. I know it’s big and fat, but my neck would appreciate it more if it could use it’s engine to brake downhill.
 
Part of the reason the mini trucks absolutely dominate crawling when done right is they weight next to nothing. At 6000+ lbs and super low gearing you will need full driveline upgrade with dyna 80 axles before it might be reliable again.
 
$1200 for hell fire knuckles, which were sold out last time I checked..... comon, market

And how many of those are installed on an FJ80 in North America, 5 maybe 6 tops?

Don't get me wrong I would love more gearing options for these trucks but realistically I don't think we'll ever see a solution because the market isn't there. The 80s market is all about glamour accessories. There will never be enough demand to justify the R&D expense for transfer case gearing lower than the 3.11 you have now.
 
Then @jcardona1 we’ll then its just sad.

Makes me want to buy a Jeep 4 door with that quote.

I don’t just want to rock crawl my dam FJ, I just want it to be easier on the trails.

I bet if a 4.0 transfer case gear would be available they’re would be more than 4 hellfire knuckles on the 80 in North America.

You want to talk about 6000lbs, look at your buddies 4door built Jeep. Those are just as heavy as our land cruisers!
 
Last edited:
Search NW fab black box. They had something going.

I’ve wheeled my 80 enough to know what it’s good for. It does everything OK with very little drama. It does nothing exceptionally well, but I’m ok with that.

I work on it maybe 1 day every 6 months, wheel it (fairly hard), DD it (I work from home/airport), haul my family and dogs around, use it for Lowe’s runs, and road trip it. It’s great to have a vehicle that can do all of that decently. I think that’s why most folks buy an 80.

The reason most of the veterans on this board tell you to start with a different platform if you want to build a crawler is because they’ve been far enough down that path to realize it’s not worth it.
 
I guess I shouldn’t have bought the beadlocks for the 80.

Might as well just trade them in for some 24 inch rims with 37’s.

Soooo depressing!

Common, who do I have to write? My congressman.
 
Guess I'm one of the 5 or 6 people w/ Hellfire's :cheers:
 
I guess I shouldn’t have bought the beadlocks for the 80.

Might as well just trade them in for some 24 inch rims with 37’s.

Soooo depressing!

Common, who do I have to write? My congressman.

If I’m not mistaken Hellfire fab knuckles were started by a single guy. Why don’t you invest the money and find someone to r&d it and get some figures together for the rest of us that would be interested.
 
2 people in my club run hellfire knuckles. More 80's than you think are running them.
 
Back
Top Bottom