Awesome! Thanks man...looking forward to meeting everyone this weekend.
Trollhole's parts swap
- Thread starter Trollhole
- Start date
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
Awesome! Thanks man...looking forward to meeting everyone this weekend.
- Thread starter
- #82
ACC will be coming up.
[4 (or is it 5) Steelies 15 inch]
Do these fit disk or drums?
Do these fit disk or drums?
They came off of my 62. I did run spacers in the front.
Land Speeder
InstaH8R
Please PM me a price.... or I'll PM you... make it worth my drive from GREENBO AL A BAMA! Just kidding, Auburn.... and we play Georgia on saturday... here! But if the price is right... I love my friends from SC so it'd be good to see some folks!
Land Speeder
InstaH8R
And bee-tee-dubya... I got plenty of useless parts off of Lorena (91 FJ80) that I can bring up there...
- Thread starter
- #87
Map kind of gives you an idea of where I am. Also note I have labeled Bucky' BBQ for Eric.
There are a whole lot of things in the area as far as food and such. There is a Wachovia ATM at the CVS across the street from me a gas station on the corner. A subway behind that and a Harley Davidson dealership right down the road.
There are a whole lot of things in the area as far as food and such. There is a Wachovia ATM at the CVS across the street from me a gas station on the corner. A subway behind that and a Harley Davidson dealership right down the road.
buckys bbq ....mmmmmmmmm
no love for saffron...tisk tisk
no love for saffron...tisk tisk
Southeast Overland
Get lost! Go explore!
Marshall - do you have a Pig front and rear dshaft, Pig rear axle, Pig front axle, and a pair of front birfs for a 60?
Parts swap
Looking for:
brake line block from front frame horn on a disk brake truck
4 speed shifter
8274
4 (or 5) rims
complete rear axle (around 78 vintage) from a 40
or.... FF rear axle from a 40 series?
Possible for sale:
TEQ PTO winch
5 ea. 16 inch split rims with new BFG MT's (255-85/16's new)
2F motor complete (can be heard running and driven)
3 speed trans with column shift
vacuum shift transfer
Downey 4 speed bell housing to fit Chevy V8
Ping me at seriesLR@gmail.com
Should be at the swap meet around 9am.
Jim
Looking for:
brake line block from front frame horn on a disk brake truck
4 speed shifter
8274
4 (or 5) rims
complete rear axle (around 78 vintage) from a 40
or.... FF rear axle from a 40 series?
Possible for sale:
TEQ PTO winch
5 ea. 16 inch split rims with new BFG MT's (255-85/16's new)
2F motor complete (can be heard running and driven)
3 speed trans with column shift
vacuum shift transfer
Downey 4 speed bell housing to fit Chevy V8
Ping me at seriesLR@gmail.com
Should be at the swap meet around 9am.
Jim
ClemsonCruiser
Supporting Vendor
Stuff I will have at the parts swap:
Ramsey PTO winch complete.... winch, shafts, gear box, etc.
FJ60/62 Mint hood and drivers rear door
Tan Paki softop in used condition
restored/ rebuilt PTO gear box; very pretty
Ramsey PTO winch complete.... winch, shafts, gear box, etc.
FJ60/62 Mint hood and drivers rear door
Tan Paki softop in used condition
restored/ rebuilt PTO gear box; very pretty
Jim.... I have 4 or 5 rims for you.
You bringing the 45 down???
You bringing the 45 down???
Hi Al,
I'll be riding down in comfort on Saturday. Leaving the 45 at home. I'll watch for you on those rims.
jC
I'll be riding down in comfort on Saturday. Leaving the 45 at home. I'll watch for you on those rims.
jC
I why did I not prepare for this and think about comming. Turns out I might be. Trying to work with Al to get mine/his 95 FZJ80 as a complete rig. Been trying to get ahold of Trollhole who is buying the engine/tranny/t-case. Thinking that I might just bring the whole thing and whatever doesn't sell on it that day he can just have so I can be done with it and get it out of Al's garage once and for all. Has a brand new winsheild in it but everything from there on out as LT1FIRE (Al) has stated has lived a hard life. Don't have time to answer what is on it becuase in all likelyhood it no longer is. If it shows up you will see it in all its glory.
Al, just thinking you still have that extra 8" ARB and I could bring up my few extra LX parts if someone needs them but won't if I don't hear anything prior.
Stock roof rack
stock springs,
Slightly dinged up but mostly good stock running boards
I think Al still has my stock rear bumper/front (not sure) and the trailer hitch that we took off.
Stock Control arms
Stock front drive shaft
Ohh also have a used extremeaire magnum air compressor. Worked fine when I used it last. Needs a new filter, and a good cleaning. Could use the cash or a good trade for some 80 or 40 series goodies. Especially barn doors for a 40.
Hope to see you there and to hear from Trollhole soon to see if we can bring that whole 95 parts car in for the pickings.
Jason
Al, just thinking you still have that extra 8" ARB and I could bring up my few extra LX parts if someone needs them but won't if I don't hear anything prior.
Stock roof rack
stock springs,
Slightly dinged up but mostly good stock running boards
I think Al still has my stock rear bumper/front (not sure) and the trailer hitch that we took off.
Stock Control arms
Stock front drive shaft
Ohh also have a used extremeaire magnum air compressor. Worked fine when I used it last. Needs a new filter, and a good cleaning. Could use the cash or a good trade for some 80 or 40 series goodies. Especially barn doors for a 40.
Hope to see you there and to hear from Trollhole soon to see if we can bring that whole 95 parts car in for the pickings.
Jason
Southeast Overland
Get lost! Go explore!
I also need a pair of heavy OME rear springs for a FJCruiser if anyone has a set.
I can't make it, but I have some stuff if anyone wants to make an offer, I'll send it up with Eric:
set of 4 stauns deflators
2 mini truck solid front axle housings only with misc. mounts from 3 links and such
1 mini truck front axle housing visibly bent
cloth bench seat that will bolt into the back seat area of a 1st gen 4runner
1 mini truck birfield and short shaft
1 mini truck birfield and long shaft
set of black 3rd gen 4runner SR5 mudflaps
well worn 3rd gen 4runner steering rack
weld on diff protection for mini truck housing
'97 4runner 2wd rear coil springs
Seat mounts from some military spec. mastercraft seats
2 passenger side doors from '97 4runner limited-desert dune with grey limited clad
custom mudflaps that came on my '85 from california
air tank that will bolt in spare tire location of 1st gen 4runner
several Aisin IFS hubs from 1st gen 4runners
Stuff I'm looking for if you have it:
17" wheel with 3.25-3.75" backspacing-just one
36-37 x15" tire-just one for a spare
Hi pinion 8" diff
set of 4 stauns deflators
2 mini truck solid front axle housings only with misc. mounts from 3 links and such
1 mini truck front axle housing visibly bent
cloth bench seat that will bolt into the back seat area of a 1st gen 4runner
1 mini truck birfield and short shaft
1 mini truck birfield and long shaft
set of black 3rd gen 4runner SR5 mudflaps
well worn 3rd gen 4runner steering rack
weld on diff protection for mini truck housing
'97 4runner 2wd rear coil springs
Seat mounts from some military spec. mastercraft seats
2 passenger side doors from '97 4runner limited-desert dune with grey limited clad
custom mudflaps that came on my '85 from california
air tank that will bolt in spare tire location of 1st gen 4runner
several Aisin IFS hubs from 1st gen 4runners
Stuff I'm looking for if you have it:
17" wheel with 3.25-3.75" backspacing-just one
36-37 x15" tire-just one for a spare
Hi pinion 8" diff
How come when i have the money i can't find anything i need yet when i am flat broke everything i need is right in my face???
Just remembered a few extra things.
5 265/75R16 Firestone Transforce AT's bought them for a project that I let go. Brand new cost me about $750 brand new $500 for all 5
ARB LOCKER 8inch toyota. Older model came out of a 4cylinder 4runner rear.
Have the compressor and all the wiring for it. Worked when removed only problem is a small hole in on of the hard lines $250 OBO for the whole thing
4 285/75R16 Goodyear wrangler MTR's used about 15-20% tread on two and 10-15 on the other two.
5 265/75R16 Firestone Transforce AT's bought them for a project that I let go. Brand new cost me about $750 brand new $500 for all 5
ARB LOCKER 8inch toyota. Older model came out of a 4cylinder 4runner rear.
Have the compressor and all the wiring for it. Worked when removed only problem is a small hole in on of the hard lines $250 OBO for the whole thing
4 285/75R16 Goodyear wrangler MTR's used about 15-20% tread on two and 10-15 on the other two.