Trail Tailor Offerings

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Bearing cup/race installer tools are now in stock.

Bearing Cup - Race Installer


J

IMG_20180529_130046266.webp
 
I've had a few questions on what I'll be adding to my line card since bumpers are no longer available. (I sold all of my designs except for 3-- NONE ARE FOR 60s)

Still available:

Tough Dog suspensions (parts or kits)
Sliders
Racks and mounts
Extended swaybar links
Front and Rear tow mounts
6 and 8 button accessory switches for LED lights, ARB compressors, lockers, etc..
U-joints
Front skidplate
Aluminum tailgate lids (as demanded in a group order)
Aluminum cargo/ quarter panels
Vinyl flooring kits
Sand recovery boards
ComeUp Winches
Roof Top Tents
Awnings
CB antenna mount in stock location
Door weatherstrip kits
C-channel repair kit
Misc factory replica SSTs
54mm hub sockets
Rear FF hub socket
Sloppy wiper repair clips
Apron seals
B-pillar (front seat belt covers)
Knuckle kits




Coming soon:

Skidplates -belly
Rear antenna/ LED pod mounts


Always open for ideas, so throw things at me and see if there is a group interest.

Jason
 
TRAIL TAILOR said:
I've had a few questions on what I'll be adding to my line card since bumpers are no longer available. (I sold all of my designs except for 3-- NONE ARE FOR 60s)

Still available:

Tough Dog suspensions (parts or kits)
Sliders
Racks and mounts
Extended swaybar links
Front and Rear tow mounts
6 and 8 button accessory switches for LED lights, ARB compressors, lockers, etc..
U-joints
Front skidplate
Aluminum tailgate lids (as demanded in a group order)
Aluminum cargo/ quarter panels
Vinyl flooring kits
Sand recovery boards
ComeUp Winches
Roof Top Tents
Awnings
CB antenna mount in stock location
Door weatherstrip kits
C-channel repair kit
Misc factory replica SSTs
54mm hub sockets
Rear FF hub socket
Sloppy wiper repair clips
Apron seals
B-pillar (front seat belt covers)
Knuckle kits




Coming soon:

Skidplates -belly
Rear antenna/ LED pod mounts


Always open for ideas, so throw things at me and see if there is a group interest.

Jason
Click to expand...

Partial door cards?
AC bezel?
 
NookShneer said:
Partial door cards?
AC bezel?
Click to expand...


AC bezel was supposed to be started by a 3D printing guy here on MUD. @Kmonty66 what was the guy that started getting guys together in the Bay area? This was him. I atually took one over to machinist to look at making out of aluminum.

Partial cards are something I'll work on as I have some free time. I have a set to pull dims off of.

J
 
TRAIL TAILOR said:
AC bezel was supposed to be started by a 3D printing guy here on MUD. @Kmonty66 what was the guy that started getting guys together in the Bay area? This was him. I atually took one over to machinist to look at making out of aluminum.

Partial cards are something I'll work on as I have some free time. I have a set to pull dims off of.

J
Click to expand...
@MrK was going to be working on this.
 
NookShneer said:
@reevesci you’d be the only one in the game with the skid plates. I reached out to Cruis’n Off-road last month and he isn’t doing 60’s anymore.
Click to expand...

Main reason no one does them is there would be 9 skids to cover the 3- 60 series variations just in steel and 18 if I add aluminum to the menu.. Not to mention low volume. Which low volume is fine with me. I can make 5-10 of each and store them pretty easily now.

I already have the front radiator/steering skid in stock; aluminum and steel; bare and powder coated..

I never knew Jason made the 60 skids, just knew of the 80s. I have the 80 Creeper skid and about to add the radiator/steering skid to the menu.

J
 
I have your front Skid In steel Still have to mount it. It has been kicking around my garage since I bought it. Built tough and not going anywhere soon. It should get mounted this week. I was looking at my '86 protection plate, or what every Toyota called the flimsy piece of tin.
I hope you make something decent.
I had Aluminium skids on my FJCruiser when I had it and beat the hell out of them. Aside from some minor scratched they looked fine.
It would be nice to see a set.
 
Willard said:
I have your front Skid In steel Still have to mount it. It has been kicking around my garage since I bought it. Built tough and not going anywhere soon. It should get mounted this week. I was looking at my '86 protection plate, or what every Toyota called the flimsy piece of tin.
I hope you make something decent.
I had Aluminium skids on my FJCruiser when I had it and beat the hell out of them. Aside from some minor scratched they looked fine.
It would be nice to see a set.
Click to expand...


They will be 3/16" HSLA steel or 1/4" aluminum.

J
 
Willard said:
I would like to see aluminum. Although they may be more expensive than steel the weight is about 1/2.
A proper skid plate for the underside of the 60 is really lacking.
Click to expand...

I think the skids I have in mind will impress most......
 
It was a hot weekend here in Redding. My burn table evaporated almost 3" of water. Pulled the hose out to fill the table ( I usually add 1-4 buckets of water a week) the hose was too short.... SO I IMPROVISED... took a piece of DOM tube to extend my hose.

All good again.

J

IMG_20180702_071751909.webp
 
So you are a dealer for Comeup winches, huh? Hmmmmm.:hmm:

Good news
 
You must log in or register to reply here.

Share this page

Back
Top Bottom