The Mule / 73’ with a past?

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Been having a very annoying time with a light backfire on decel for months of driving. Sometimes barely any sometimes super loud. Went back through the carb myself this time and didn’t find anything but a small amount of trash making it through the factory filter element. Finally decided the distributor needed to be further inspected. I had it out already and felt the bushing was worn but didn’t think much about it other than it has some miles on it. Well I contacted @4Cruisers John and discussed options and off it went. I cleaned it up before it left alittle with some std finesse of cabinet cleaning. It finally was complete and installed yesterday and ZERO backfires. I’m also attributing some of the issue to partial or fully frozen mechanical advance also found after taking it apart fully.

View attachment 3160745

View attachment 3160746
I used a new Toyota bushing from a '78/'79 6-cylinder 4M distributor (used in the Corona Mark II) to replace the top shaft bushing. That solved the issue with excessive lateral play at the top of the distributor shaft. I plan on doing the same bushing replacement on a distributor (19100-60042) I've had for a long time from @63cruiser.
 
Wanted to share what the UPS man showed up with today. @a1500ram and I discussed making these and once we nailed down the details he got after it. This whole kit turned out WAY better and more included than I figured on. Kick panels, front door panels , rear panels, cargo panels, B pillars and clips. The TEQ logo is damn nice too. Much more cushy than what I had and will look great once I get them in.
Thanks!!!

BEDCE7C7-BE67-4F62-A321-FEAAA6C0DECA.jpeg
 
Wanted to share what the UPS man showed up with today. @a1500ram and I discussed making these and once we nailed down the details he got after it. This whole kit turned out WAY better and more included than I figured on. Kick panels, front door panels , rear panels, cargo panels, B pillars and clips. The TEQ logo is damn nice too. Much more cushy than what I had and will look great once I get them in.
Thanks!!!

View attachment 3186065
Them sexy right there.
 
Wanted to share what the UPS man showed up with today. @a1500ram and I discussed making these and once we nailed down the details he got after it. This whole kit turned out WAY better and more included than I figured on. Kick panels, front door panels , rear panels, cargo panels, B pillars and clips. The TEQ logo is damn nice too. Much more cushy than what I had and will look great once I get them in.
Thanks!!!

View attachment 3186065


Take me to your leader !
 
Wanted to share what the UPS man showed up with today. @a1500ram and I discussed making these and once we nailed down the details he got after it. This whole kit turned out WAY better and more included than I figured on. Kick panels, front door panels , rear panels, cargo panels, B pillars and clips. The TEQ logo is damn nice too. Much more cushy than what I had and will look great once I get them in.
Thanks!!!

View attachment 3186065
That is just porn. Reporting!😛
 
Wanted to share what the UPS man showed up with today. @a1500ram and I discussed making these and once we nailed down the details he got after it. This whole kit turned out WAY better and more included than I figured on. Kick panels, front door panels , rear panels, cargo panels, B pillars and clips. The TEQ logo is damn nice too. Much more cushy than what I had and will look great once I get them in.
Thanks!!!

View attachment 3186065

And where do we get to send money to?
 
And where do we get to send money to?
contact him. Very professional. very good communicator and very nice to do business with!
Already had the felts replaced on this door and the inner handle @Pigeaten heloed me out with so this door was already sorted out so I slid out in the shop and did this one today.

4989B790-AEE1-4D25-92E2-45888DCFEB29.jpeg
 
Already had the felts replaced on this door and the inner handle @Pigeaten heloed me out with so this door was already sorted out so I slid out in the shop and did this one today.

Unique flavor of interior handle
 
@a1500ram is your man - he does fantastic work

I have his panels in my Pig.

There is a thread somewhere in here on his work...

Steve Bennett
SMS Headliners, LLC

 

Users who are viewing this thread

Back
Top Bottom