Suspension Help!

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

That quote above just means you have not taken a :steer: on Slinkies... plain & simple.
As if that changes the context of anything.
One thing's for sure, I won't be bothering with them. Far too much variance and frankly, no need.
It's the simple things don'tchya know.
 
what variance?
Oh the 5 pages of he-said-she-said, should be this but it's that, should'a been that but it's this, plus PM's, angst, and ulcers.
Just too much.
But I hope it all ended well for those involved.
 
ok enjoy your OME kit. But I agree with @GW Nugget you're missing out.
I'm plenty satisfied to miss out on all that preceded the last few notes on this thread. 👍
My luck is such that I would be knee deep in the same sitch had I gone with slinkies. It's just how it is for some folk.
 
I'm plenty satisfied to miss out on all that preceded the last few notes on this thread. 👍
My luck is such that I would be knee deep in the same sitch had I gone with slinkies. It's just how it is for some folk.
Haha, if such is your luck.....
But....there are literally hundreds of the kits out there now in the US, and many times that many in Australia without this issue. So chances are slim. Happy to give you a ride if you're ever out this way, unless your "luck" is contagious. :)
 
I'm plenty satisfied to miss out on all that preceded the last few notes on this thread. 👍
My luck is such that I would be knee deep in the same sitch had I gone with slinkies. It's just how it is for some folk.

So you are saying you wouldnt be able to provide the information requested to work through your thought process if you had questions either ?

Asking for a friend :hmm:
 
But....there are literally hundreds of the kits out there now in the US, and many times that many in Australia without this issue. So chances are slim. Happy to give you a ride if you're ever out this way, unless your "luck" is contagious. :)
Good Lord. lol No, I don't doubt that for a second. I see them alot and for many they are the 'end game'.
Ehhh there have been a few instances where others luck appeared uncannily familiar. Would love a ride next time I'm in SLC. :cheers:
 
So you are saying you wouldnt be able to provide the information requested to work through your thought process if you had questions either ?

Asking for a friend :hmm:
Absolutely not. I would have been absolutely resolute that everyone was on the same dam page. OFFLINE and BY VOICE at least.
But I'm not picking sides mate. I hope it all worked out and I hope you never have to deal with something like this again. ;)
 
For the record, we asked for specific details via PM and we stand by the fact we dont do customer education on purchase via forum threads but by P.M or email. If you P.M me to ask for assistance, and then get requests for details so we can have the conversation via the medium you chose to contact us, but cant send through what is required to help you and have the conversation, then we are stuck on waiting for you to send what as requested.

We cant be short, terse, or any other unhelpful thing while waiting for you to do what is needed to help you. The idea of the request for help, and the details to know what we are working with require short precise details to concentrate on the problem.

Waffle, and rewriting history, and forum threads do not create this environment to concentrate on the data and supposed issue.

If that doesnt work for you, I have no problem with that, but setting up someone to blame for your own shortcomings on supplying as requested, and is obvious it seems to everyone else trying to help or reply in this thread, then you make your choices and move on.

You dont keep trying to blame everyone else, while you couldnt do as was requested.

Wether I read here or not has no bearing on the requests made that werent fulfilled by the person requesting details by P.M here to begin with. You need to respect that given you asked me for help.

We never received the requested details despite numerous attempts, and stated several times we would not debate the process in a forum thread.

Its obvious from the re writing of history attempted in this thread as to why we requested the details by P.M or email and why we dont discuss in forum threads.

Do the right thing, follow directions, give the data required as requested, get the right result, its pretty simple really.

This is complete BS and you know it. You're doing damage control and looking to get the last word.

The bottom line is that you put zero effort into helping, tried to back peddle and blame your poor customer service on me, then continued to perpetuate a pointless argument. Any of your perspective customers who run across this thread will have all the info they need to make an informed decision on what to expect from you and your product.

Also, take note that the people backing you up are the ones who didn't have these issues with your products, therefore didn't have to deal with your poor customer service.
 
I swapped the 75mm slinkys for OME j's, and the truck sits at the right height now.

The springs in questions were both batch 19/4-3 and part number AC7498 on the tag.

Slinky measurements are as follows:

Free height: left 24.25" right 23.75"

Coil diameter 3 wraps in from top of spring:

left 15.29mm
IMG_20190919_134815153.jpg


Right 12.35mm

IMG_20190919_134823574.jpg


The spring with the yellow tape measure is the left spring

IMG_20190919_134248711.webp
 
So you are saying you wouldnt be able to provide the information requested to work through your thought process if you had questions either ?

Asking for a friend :hmm:

Such professionalism
 
I commend you for being so patient! I would of said good day long ago, definitely will look at your offerings when I get the itch to change springs again....hopefully not.

Pm him first, he will ruin your attitude. Unless you want somewhere in the ballpark of 3-6" lift, then these springs are perfect.
 
This is complete BS and you know it. You're doing damage control and looking to get the last word.

The bottom line is that you put zero effort into helping, tried to back peddle and blame your poor customer service on me, then continued to perpetuate a pointless argument.

OK, I dont normally post up P.M s but when our service is being questioned, and we are being accused of lying, and zero effort, the best way to show that wasnt the case would be to submit the evidence, to dismiss these fanciful claims, and ensure others understand from your replies here, that assistance was given over and above every request, as the P.ms will show.

Your accusations have given us no choice on this given you want to play the public thread game, which is apposed to your P.M game, and try and do so at our expense. We wont stand for that, when we tried several times, and just met more opposition to requests for more results.

Your replies are the whole reason why the public thread never works for concise, clear communication and customer education. We make no apology for sticking to the request for clear concise information for an offline undistracted conversation to assist with the requests.

1569390422765.png

1569390453820.png

1569390484988.png

1569390528787.png

1569390560857.png
 
Last edited:
OK, I dont normally post up P.M s

Yep, that's a line I would not cross - but you have no problem doing so. Anyone reading them should note the time stamps and the concurrent forum posts thread. It also should be noted that this thread was objective before you started denying the possibility of an issue before (according to you) you even had any info about my truck.

Still no tech discussion from you or concern for the possibility of an issue existing in PM's or otherwise. If you could drop your ego for about 10 minutes and read my posts, you could get this figured out for yourself. You have all of the info about the springs and my truck in this very thread (the one that you are replying to, but refuse to read).

Like I said before, my problem was solved by Kevin at EHO and I am thankful for him stepping up to resolve this before my trip. Above and beyond customer service on his part.

Does anyone want any other measurements from these springs before I send them back?
 
Think the horse is not only dead it’s fossilized, let it go and do yourself a favor by trade in your 80 for a shiny new Jeep!

Contributors such as yourself keep dead horses alive.
 
@AutoCraft Aus

How much lift do you expect the slinky springs will provide if I had ARB bumper, 12K winch at just under 2900lbs at the front axel with me in it. The reason I ask is I'm really aiming for 2.5 inch of lift since 3 inches is too close to the lift height most people running into issues with. Plus a lot of caster correction setup is for 2.5 inch. I currently have heavies front and back with no complaints what so ever but do like the idea of having a little more droop since I'm already running 4 inch/longer shocks.
 
I highly doubt that given the dishonest nature in which you have publicly posted, which the PMs obviously dont support, so you left us no choice in our defense due to your conduct on this matter. How it appears in the thread here has no bearing on the request from us, as you were told, we dont do customer education by public thread generally. You chose not to deliver what was required to help you as requested.

Just because you are ignorant of the reasons for doing P.M or email only, [and in fact posted up some of what we asked after we asked for it....] doesnt make us wrong, its just our policy, ad you have been living proof of why we have that policy.

Thankfully you went back to the person who sold them to you, which would of been the correct action to begin with, and they could of contacted us if they required any further information.

We simply tried to help the same way we would of had we seen an issue any other time, as a wholesaler, product designer, engineering and manufacturing. You didnt contact a retailer to deal with you at a retail level, and you seem to be surprised and upset by this.

Our focus was the potential issue, and customer education, your issue seemed to be we couldnt solve your issue with out information, most of which you ended up posting up anyway, rather than send it to us as requested.

Our replies are in response to your accusations, and public thread, you forced us to this position, and we responded with facts. We stand by our emails to offer help, educate you, and try and get what was required to assist you, despite your resistance to be helpful. For this you tried to throw us under the bus, so we had to correct your errors.

Good for you, I'm giving a loud silent clap right now. I have my opinion, you have yours. You have all the info needed to solve the problem, do what you want with it.

Here are the slinky tears I shed... Maybe I will sell a kit after I dial in valving?

IMG_20190925_155119768.jpg
 
Back
Top Bottom