supercharger

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Feb 22, 2006
Threads
21
Messages
134
Location
Rio Grande Valley, Texas
Part#TRD-17620-501
17620-501.JPG


Part Description: Supercharger Assembly - Land Cruiser 4.5L (95-97)
Price:
Click your selectionQuantityPrice EachDiscount1.00$3,811.000.00%

Recently in one of the offroad magazines I read that LC engineering was taking over the production of superchargers from TRD. Magazine went on to say that they are 8lb boost units instead of the previously 4lb units from toyota. Looked them up and it seems they carry one for the Land Cruiser. Thought I would post it up since I recall hearing that they were discontinued. For those that have the 4lb unit they sell the kit to increase boost to 8lbs. If its old news, sorry, thought I'd share the info just the same. Info below is from their website.



More InformationSupercharger Assembly - Land Cruiser 4.5L (95-97) Inline Six

For the easiest, most dramatic and most reliable boost in horsepower and torque, TRD offers positive-displacement Roots-type superchargers, designed and developed extensively for popular V6 and V8, and even 4-cylinder powered Toyota cars and trucks.

Power Everywhere, All The Time
TRD Superchargers are belt-driven from the crank, delivering more torque and horsepower from idle to redline. TRD Superchargers deliver the extra torque you need for towing, passing and carrying heavy loads. Because they pack more air into every cylinder stroke, they are especially effective at higher altitudes.

Complete, Compact, Integrated Design
All TRD Superchargers are sold as complete packages with all the components required for installation. Step-by-step, model-specific instructions with numerous photographs are included with every kit. Most TRD Superchargers feature an integrated intake manifold and supercharger housing. This creates a more compact, leak proof, reliable installation.

TRD Superchargers are smog-legal in all 50 states. This gives you all the performance you need without affecting your vehicle's legal status or your peace of mind.

 
The ones we bought through Toyota were 8lb boost. And the discount through Cdan was really really nice as that is the list price.
 
I am glad you spoke up Romer, I was sure that the TRDs are 8lb boost units.
 
sorry for the misinformation on the boost levels, i misquoted the mag, those boost levels were for the tacoma superchargers. Sorry about that.
 
Hmmm, my nose cone and SC housing look different than yours. I will post a pic so we can compare.

karl
 
That's because his is the newer version blower case.
 
I chatted with LC engineering on the phone. He said they started doing the superchargers for the 1FZE because of overseas customers. They are sending a ton of them to Dubai. He rattled off some other ME countries too. He said some of their customers are ordering 10 superchargers at a time.

I called because I wanted to know if they would be doing the same for the 2UZ. They are not. There is not a world market for them.
 
Here are the pics. Sorry it took so long - sometimes life gets in the way of the things I really want to do. So aside from the external tooling, my expectation is that internally and functionally, they are the same. Is this true?

Karl
sc_skinny_pass.webp
sc_skinny_drv.webp
 
The ones we bought through Toyota were 8lb boost. And the discount through Cdan was really really nice as that is the list price.

TRD lists the SC application for the 4.5L 1992-1997 engines as 6.5psi, with a 3.2in SC pully and a 7.7in crankshaft pulley. This is listed in 50 state exemption TRD applied for and got CARB EO D-425-7. On a really cold day before good volumetric efficiency of the intake, I've seen 7psi for a moment, never 8.

My understanding is that the new TRD SC kits will replace the M90 with one of the new Eaton TVS series high efficiency superchargers. The camry TRD fitment unit is already in Australia market. This will require a new Carb exemption for the stateside market, so I doubt this will come quickly to the 80. The good news is that the TVS units are designed to run more efficiently than a turbo application, and the peak Pressure Ratio is designed to be up to 2.4 (20psi)

Scott J
94 FZJ80 Supercharged
 
I see 7 PSI at 5280 feet all the time. In Moab I have seen 8. I am reading off my analog gauge.
 
I chatted with LC engineering on the phone. He said they started doing the superchargers for the 1FZE because of overseas customers. They are sending a ton of them to Dubai. He rattled off some other ME countries too. He said some of their customers are ordering 10 superchargers at a time.

I called because I wanted to know if they would be doing the same for the 2UZ. They are not. There is not a world market for them.

LC is a great company. I bought a really nice Stage Two 22R head from them a few years ago; it was a work of art. Prompt shipping, knowledgeable folks.

I'm glad to see them filling a Land Cruiser need.... maybe they'll get into performance mods for our rigs, now that they're approaching rebuild mileage.
 
I see 7 PSI at 5280 feet all the time. In Moab I have seen 8. I am reading off my analog gauge.

I would expect at a higher altitude, you will read slightly higher guage pressures Ken. And if you don't relieve the guage pressure when coming down from altitude, it can read high there too. My liquid filled Boost Guage in my 4Rturbo had a altitude reset button at the back of it. Corrected to altitude, your guage should read the same as mine = TRD and Carb says that's 6.5, based on a M90 SC on the 1FZFE engine with a 2.4Pulley ratio. What you are seeing is the advantage of force inducted cars at altitude in terms of power output, usually referred to in terms of Pressure Ratio.

Gauge Pressure = Absolute Pressure - Atmospheric pressure

Most common automotive boost pressure guages are not Absolute Pressure guages, which means the boost guage reading will go up with increases in altitude, but absolute pressure is the same.

Scott J
94 FZJ80 Supercharged
 
Last edited:
I would expect at a higher altitude, you will read slightly higher guage pressures Ken. And if you don't relieve the guage pressure when coming down from altitude, it can read high there too. My liquid filled Boost Guage in my 4Rturbo had a altitude reset button at the back of it. Corrected to altitude, your guage should read the same as mine = TRD and Carb says that's 6.5, based on a M90 SC on the 1FZFE engine with a 2.4Pulley ratio. What you are seeing is the advantage of force inducted cars at altitude in terms of power output, usually referred to in terms of Pressure Ratio.

Scott J
94 FZJ80 Supercharged


Incorrect. I read higher boost at lower elevations. I don't buy your theory on higher readings at higher elevations, it would go the other direction as less dense air so less boost and that is the way it is behaving.

I will admit it went up after I installed the snorkel :D it was down around 5-6 before that.

When I bought my SC it was sold as an 8 PSI boost unit. Your readings could be due to it being a 94 scott.
 
Incorrect. I read higher boost at lower elevations. I don't buy your theory on higher readings at higher elevations, it would go the other direction as less dense air so less boost and that is the way it is behaving.

I will admit it went up after I installed the snorkel :D it was down around 5-6 before that.

When I bought my SC it was sold as an 8 PSI boost unit. Your readings could be due to it being a 94 scott.

Ken,
You are in my turbo world now sir! If you read higher readings at lower elevation, then my bet is either your gauge is not bleeding fully from your high altitude set point, it's just incorrect, or more likely, your ecu has not fully altitude compensated, causing poor Volumetric Efficiency (the less the VE, the higher boost you will read). 10 years ago, I paid 600 bucks for a used Helicopter absolute pressure guage that was FAA certified. Absolute pressure guages are really expensive Ken, I know the one you installed is NOT an absolute pressure guage. Which means exactly that increases in altitude will cause a higher *boost guage* reading. Absolute Pressure will decrease slightly because the pump (SC) efficiency falls off with increases in Pressure Ratio.

If Absolute Pressure = Guage Pressure + Ambient Pressure, then with a 2.4 pulley ratio (3.2in SC pulley)....

At 5000 ft
8psi + 12.2psi = 20.2 Absolute Pressure
at Sea Level
6.5psi + 14.7psi = 21.2 Absolute Pressure


So, your guage reads higher, mine lower, but Absolute Pressure remains constant, and with PR (actually really a density ratio issue) compensation the 6.5 at altitude should perform better. And, to maintain the same 20.2 Absolute at 10,000 feet, your pressure guage would read 10psi! For a more nerdy read on this concept, start about 1/2 way down this page (sorry for the audi reference, but this is just physics)....
http://www.sjmautotechnik.com/trouble_shooting/10vgauge.html

WRT altitude 'behavior' that's again a density ratio (compressor efficiency) problem, not a boost problem. Compressors work harder at altitude = less efficient.

WRT the differences in our trucks and TRD, the carb exemption order puts the same M90 SC on 1FEFZ motor from 1992-1997, with the same pulley diameter of 3.2in and the same crank pulley diameter of 7.7 inches = which means ALL engines so equipped should see 6.5psig (corrected to altitude). That is part and partial to EOD 425-7. Any claim of more psi than the 6.5 would be in violation of EOD 425-7, but more basic than that, would require a different SC pulley. OBDII can't change the output of the SC.

Summary: 3.2in SC pulley on the 1FEFZ is 6.5psi corrected max boost.

HTH

Scott J
94 FZJ80 Supercharged
 
Last edited:
Back
Top Bottom