?? Saginaw Power Steering ??

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Apr 14, 2006
Threads
123
Messages
1,108
Location
Central Cali
Howdy, i just purchased a saginaw gear box and a power steering pump for my 77 fj, my questiion is, for someone that has done this conversion. have you had any expierence with the spector off road conversion kits ? are they worth a sh?? ? and are all parts in those kits need for this conversion ? or shall i look else where or if you have any info it is apprecaited. oh by the way picked up the gear box and pump at a swap meet,both pieces $8. what a steal.

CHEERS ..... :beer: :beer:
 
I got mine from Marks off road and it was pretty good. He is on the board here as 65swb45. I think it is the same kit that Downey makes except the plates are different. He will sell you the individual parts that you need. I have also heard good things about Kurt's kit . He owns cruiser outfitters and is on this board also. Most kits will require obtaining hoses yourself. Some modify lines from other vehicles, others have custom lines made. I purchased a pillow bearing from grainger and had the custom lines made at the local hose shop.
 
dont waste your time, call kurt at cruiser outfitters, he'll set you straight, he has the best prices and is awesome to work with
 
me want to do this!
what make and year Saginaw pump/gears works with which year FJ40?
 
camcruiser13 said:
dont waste your time, call kurt at cruiser outfitters, he'll set you straight, he has the best prices and is awesome to work with


x2

Good guy.

You don't need a pillow block for a 77. Kurt has the bearing that will pop right in. Worked great.
 
alex e said:
me want to do this!
what make and year Saginaw pump/gears works with which year FJ40?


Not sure which year Saginw .i was just told early chevy, also needs the # 76 stamped into the side and also has four bolt pattern on it, so went to a swap meet and found one. as far as the pump goes the same. early chevy, i am new to the game so gettin schooled myself.:eek:

good luck and i am gonna try the cruiser outfitters thing, will let ya know what happens.

CHEERS ,,,,,, :beer: :beer:
 
Any 800-series Saginaw box will work. Some are considered more desirable than other due to having 4 vs 3 mounting holes and the number of turns lock-to-lock. $20-30 at your friendly local junk yard. No authority on exact years but the newer boxes use O-ring -type seals on the lines while the older uses flared fittings. No big deal, just make or source the correct ones. Same with the spud shaft size/spline count.
 
Back
Top Bottom