Restoration Costs

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Jan 6, 2006
Threads
17
Messages
160
Location
Las Cruces, N.M.
Would it be too vague of a question to ask how much a typical project costs when it's done mostly at home?

Bringing a truck back to stock.

Tub replaced or panels, sill, bed replaced.
Rebuild 2F or F
Metal massaged and paint job done at home
all running gear gone thru (seals, bearings, etc.)
Tranny freshened up.
Interior replaced.
 
Your lookin at anywhere from $100 to about $40,000, yeah that sounds about right.


Remeber, it depends on how much of the work you do, and how good you want it to look.

Also, to answer your question, yes it is to vague.

Good Luck!!
 
OK, guess I deserve that. I would like my rigs to look like what CCOT puts out but do most all of the work myself without spending 40K. Could a person spend only half of that and have the same results?
 
I would say, depending on what you are starting with, yes you could get a near CCOT quality cruiser for half the price. Heck, you could even get a near Icon quality cruiser if you had the money and the know-how for half that price. Again, it all depends on what you are starting with.

If you are really curious, make a list of what you have. Then, make a list of what you need to replace, fix, etc. Then, start price checking on the internet. You can get a rough idea of how much the parts will be. Then add on about 30 percent for all the other odds and ends. Then add on another 10 percent for all the trips to the hardware/auto parts store for nuts, bolts, special or broken tools, etc.

Good luck!
 
Thanks for all yur replies. I've been lurking for quite some time now studying, figuring out what we want to do, and having fun even if no wrenches are turning yet.

We take ours out from time to time. Would like to make them safer and cleaner in the meantime and restored in the future. No hurries.:bounce: :bounce2:

Thanks again.
 
Thanks Steve. I have read through all of the first, never seen the second.
 
You can get a nicely restified late model 40 built for around 7000 if you do all the work yourself. Plus the price of the truck. Plus several hundred hours work. Plus several thousand dollars worth of tools. I'd say probably doesn't pay out much for one truck, but if you're doin a bunch of em, no problem. Oh yeah, you need a shop, utilities, endless patience and more than a little skill. Simple, right! :)
 
I think 7K is too low unless all the running gear is great and very few modifications and the body is mostly rust free and you buy the truck for 500 dollars. i think a cruiser with some up grades no rust when your finished, good paint 12 to 15 K, includes a welder. Larry
 
If you are doing it yourself you are going to save big money, by putting in huge sweat equity. The shop I use is $65 an hour. So all of the small work that you could do yourself really adds up. I know that for my project if i could have done all of the work myself I would have saved at least $10,000.

Ryan.
 
i fyou have alot of work that needs to be done at a shop get a bid or flat rate estiamte. most places will do this.
 
The more I think about this the more upset I am that I don't have the skills or place to do this on my own. I think if you are set up to do all of the work it can be done very cost effectivly. Not to mention the time you might be able to save by doing the work yourself instead of having to wait for a shop.

I would say that your project would cost:

Tub replacement - $4800 plus $400 shipping
Rebuild a 2F - $1500
Metal and Paint - $1000
Running gear - $1000-$1500
Tranny rebuild - $500
Interior - $900

Total = $10,600-$11,100

You will have a lot of work to do, and presumably a lot of rework, but you would be money ahead in my opinion.

Ryan.
 
When I bought my 40 I paid about 6k to have clutch, brakes, axles (rebuilt) hoses, belts replaced, tune up, battery, all the fluids changed etc plus a lot of other piddly stuff like pulling out the blue shag carpet, fix the lights etc.

I am having the 1/2 tub replaced now parts and labor. It wil be about 6k for that. Including cleaning and paining the frame and a couple smaller things like restoring the radio opening to OEM, adding OEM side window defrost.

Paint is a whole other story. If you want to have every little piece taken off and painted and then reassembled you're talking big bucks.

You can easily spend 15-20k. If you have the time (I don't, I have 2 kids under 3 and and an 80 that needs lockers) it will save you big$$

No comments from the peanut gallery about how your brother in laws uncle could have done twice the job at half the price, please. :)
 
I am doing this VERY thing you are considering, here is my web site where you can see the step by step in photos, I also plan to post a listing of all expenses once I get closer to the end. I am doing body work now, check out my site, if you have questions let me know, when I am done, mine with be better than CCOT, but look very similar accessory wise, RB

http://www.cruiserfetish.com/project78_1.html
 
money pit! .money pit! .money pit! .money pit! .money pit! .money pit! .money pit! .money pit! .money pit! .money pit! .money pit! .money pit! .money pit! .money pit! .money pit! .money pit! .money pit! .money pit! .money pit! .money pit! .money pit! .money pit! .money pit! .money pit! .money pit! . Welcome to the addiction!
 
buy one already restored.

itll be cheaper

Seriously?!

Not an option for me. Maybe after the kids are out of the nest.

Thanks for all of yur responses. 7k sounds really good. If it takes 15K - still wouldn't change my mine about owning cruisers. Luv'em!
 
I am doing this VERY thing you are considering, here is my web site where you can see the step by step in photos, I also plan to post a listing of all expenses once I get closer to the end. I am doing body work now, check out my site, if you have questions let me know, when I am done, mine with be better than CCOT, but look very similar accessory wise, RB

http://www.cruiserfetish.com/project78_1.html



Been here many times.. got it marked! Nice job. Sorry about the tub though! OUCH!

Least everyone will know and better yet... they'll know and fix the problem.

Scott
 
Back
Top Bottom