Overheating. Options?

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Jan 18, 2005
Threads
44
Messages
300
Location
Seattle
I am running a SBC with a stock radiator. Maiden voyage last weekend ran a little hot. I'd like to keep it running on the cooler side without a huge shroud and fan. Stays nice and cool on the road, but low speeds and high r's keep the temp creaping. It has a pretty weak Summit fan, and a high flow thermo. Any suggestions? What are other SBC's running?
 
Yea, get a shroud . . . and a four-row radiator as well. I put four-row rads on both of mine and I have noticed cooler running. With your SBC, you're gonna need that extra cooling for sure.
 
Those MAF radiators are some bling. Can I rattle can chrome on a copper/brass to match my valve covers? Is that okay TreeRoot? (ps. ready your orion job all the time. dreaming...)

I don't have a shroud that fits. I guess I can fab one up. The electric fan didn't come with one. I regret buying the damn fan now. Should have bought one just short of a swamp buggy fan and stuffed that in there.

I didn't think that the shroud would make that much difference. Is a "pusher fan" more effective?

I'd have pics of the maiden voyage to show, but my buddy with the camera and his locked scout are having a hard time accepting I made it just as far as he did open. I guess he thinks if the there is no pics in public, it didn't happen. Next time.
 
You may have a bubble in your cooling system that is not allowing flow. Take a hose and overfill your radiator to kick it out. I had a similar problem.
 
4 core radiator

I just posted a 4-core radiator for sale if you're interested.
 
Your high flow thermo may be your problem also. If it allows to much fluid to flow threw the engine then the coolant flows to fast. Thus not giving it enough time to disapate heat and cool the engine.
 
on mine i went new 4 core rad and then took the stock fan shroud and turned it upside down and cut a small notch to fit around the lower hose and also used a flex fan that i had laying around and it never gets to hot even in traffic. if you dont have a factory shroud try www.cruiserparts.net thats were i got mine, he wants like $35.00 for them. my .02 good luck
 
Used the taurus fan with dexcool coolant and a 160 degree therm. Mine doesn't get above 160 often, and never above 180.
 
usmcruiser wrote
Your high flow thermo may be your problem also. If it allows to much fluid to flow threw the engine then the coolant flows to fast. Thus not giving it enough time to disapate heat and cool the engine.

Also for people running 2Fs and following this thread, failure to install the rubber gasket on the top of the thermostat has the same effect.
 
my temp sensor is on the side under the headers. mine runs at around 190-210.
 
210 in the head does not bother you? I am just wondering if I am worring about nothing. Mine is in the head, and on a warm day (90+), it will get up to 200-210 on the freeway. I have a new crate motor and it kinda makes me a little scared. I have a BTB shroud and a MAF Alum rad. In relation to the shroud, where should the fan be? (All the wiy in, half in?)
 
Shawn Russell said:
210 in the head does not bother you? I am just wondering if I am worring about nothing. Mine is in the head, and on a warm day (90+), it will get up to 200-210 on the freeway. I have a new crate motor and it kinda makes me a little scared. I have a BTB shroud and a MAF Alum rad. In relation to the shroud, where should the fan be? (All the wiy in, half in?)


No, it does not bother me. A TBI motor uses a 195* thermostat. Mine runs around 210 when wheeling and around 215 to 220* when on the highway. I have a big ass Griffin radiator, fan shroud, and clutch fan.
 
Back
Top Bottom