Builds Outsane/Solvefunction/Cruisin2Camp Build

[Outsane]

I built a tilting fridge slide!




Awhile ago

 

[SmokingRocks]

Sub’d

Awesome thread bud. Keep it up

 

[Outsane]

Sub’d

Awesome thread bud. Keep it up

Thanks

 

[ih8mudkinkaid]

Agree. Keep it up. Love the homebrewed stuff!

 

[Outsane]

Agree. Keep it up. Love the homebrewed stuff!

Thanks I'll keep truckin

 

[Outsane]

I have a vampire!

My battery is getting drained while at work and over night. I pulled all the fuses one by one with no major drops until I pulled the fusable links. The greatest drop was to the ignition.

 

[Hornd]

I have similar voltage drop, and have not started pulling fuses yet.
We have exact same dual battery setup.

 

[Outsane]

I have similar voltage drop, and have not started pulling fuses yet.
We have exact same dual battery setup.

Keep me posted

 

[Outsane]

Ignition lamp control looks good. Unplugged it and I still have the 150mA draw....


My battery has been at 10.3v in the morning and after work.

 

[Outsane]

Just unplugged all kinds of stuff in this region, no luck.

Also tried the on board cell phone and two other connections in the rear passenger panel.

 

[Outsane]

I swapped the batteries. Came back to the car with 12.6 volts instead of 10.3. Still have the 150mA draw. Picked up an interestate agm.

 

[Outsane]

Cup holder in progress!

 

[Outsane]

Sold 7 of these cup holders through Instagram for $25 plus shipping. If there is any interest I would sign up to be a vendor here. Any thoughts?

 

[Outsane]

little trip after dropping the kids off in Bakersfield

 

[Outsane]

Solar panel set up starting

Designed / Printed some some mounts. I am going to need to redesign the rears so I can angle the panel from the front easily for more rack storage and to adjust for sun angle.

Rears

 

[Outsane]

Wire routing

Down the rain gutter, and down the snorkle

Into the fender gap

And in the engine bay

 

[stevezero]

What panel are you using? Ive got a renogy 100 watt rigid panel still in the box that I've been thinking about placing up top on my 80. Where are you planning on mounting a controller, and what model?

I've also got a renogy 100 watt solar suitcase kit that I use on my teardrop. I use a trolling motor connector on the outside of my battery box on the camper, so I dont have alligator clips.

Ive got a similar trolling motor connector on my 80, on the drivers side fender. I had to mount it there to try to remove/conceal some previous owner damage-multiplier carnage.

 

[Outsane]

I was able to snake the wires through to not need to drill.

It's also a renogy 100 w Compact.

I have a victron energy mppt 75/15

 

[Outsane]

New fire extinguisher mount, in the third row seatbelt hole.

 

[NateMob]

Could you make a flush or at least clean looking cover for the 3rd row seatbelt holes?