- Thread starter
- #461
Build Outsane/Solvefunction/Cruisin2Camp Build
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
- Thread starter
- #462
Going with a 1hdt for the #Diesel build mated to a
h150 transmission 300mm flywheel and a short tranfercase with 3.1 low
I am hoping the gearing will be good with 37's.. but not totally sure..
I still need lots of parts,,
one of the big ones is the Bell housing. 31111-60210
h150 transmission 300mm flywheel and a short tranfercase with 3.1 low
I am hoping the gearing will be good with 37's.. but not totally sure..
I still need lots of parts,,
one of the big ones is the Bell housing. 31111-60210
- Thread starter
- #463
- Thread starter
- #464
- Thread starter
- #465
Back to the old motor..
Pressure washed the motor because I saw some coolant remnants.
Found a leak! Kinda happy about it, hoping this is where the bubbles were coming from.
There wasn't a drip before.. but now there is
Order a aisin water pump to replace this hopefully leaking one.
The motor has been running well
Pressure washed the motor because I saw some coolant remnants.
Found a leak! Kinda happy about it, hoping this is where the bubbles were coming from.
There wasn't a drip before.. but now there is
Order a aisin water pump to replace this hopefully leaking one.
The motor has been running well
- Thread starter
- #466
Upper rear bushings have been replaced.