||| Official YT For Sale/Trade/Wanted Thread ||| (2 Viewers)
- Thread starter mopar
- Start date
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
rain76king
Wicked Pissah Cruisah Haulah a NLC.
Just throw it in on your northern shipment this weekend Scott. I'll get it further North.
Sounds good guys. Thanks. I will put it in with shipment. In the meantime I will keep looking for a 37" spare if anyone knows of one let me know. Don't want to be stuck on the trail without one. It would kill me to toss that Krawler. The tread is like new. Fingers crossed.
Thanks again John & Bob
Thanks again John & Bob
A few parts for sale:
1976+ FJ40 Hood in great shape $100
1968-1974 FJ40 windshield frame $100
H42 4 Speed with transfer case $150
1974 F155 (F1.5) with ~80k miles and good compression $500
Lots of other stuff, too.
FREE:
Brown FJ60 rear seat
Late model FJ40 hardtop side panel - needs work
Saginaw steering box & pump
SM420 case (no guts)
LOOKING FOR:
Early FJ40 front bumper (early versions don't have many accessory holes on top)
Early FJ40 jump seats (really early ones)
Early front license plate bracket (square looking one)
1976+ FJ40 Hood in great shape $100
1968-1974 FJ40 windshield frame $100
H42 4 Speed with transfer case $150
1974 F155 (F1.5) with ~80k miles and good compression $500
Lots of other stuff, too.
FREE:
Brown FJ60 rear seat
Late model FJ40 hardtop side panel - needs work
Saginaw steering box & pump
SM420 case (no guts)
LOOKING FOR:
Early FJ40 front bumper (early versions don't have many accessory holes on top)
Early FJ40 jump seats (really early ones)
Early front license plate bracket (square looking one)
Looking for some soft Fj60 shift boots? I put a sm465 to 3 speed transfer case in my fj40 and was told that the fj60 boots would work well. Any ideas would be helpful. Found a set of used ones on ebay for $80.00 including shipping . Thought I would ask around. Thanks
My local Sullivan wouldn't touch a radial, but they did vulcanize my Bias Ply LTB's. You have to insist the tire is only going to be used off road.
Brand new olive drab OCD soft top. $800. Looks just like this one...
FJ62 SmittyBilt non-winch tube bumper: $25
Spray painted matte black. Some dents, scratches, and rust, but pretty good shape. Tabs for mounting fogs. Came of an HJ60, and will bolt directly up to a FJ62 (wider bumper brackets). Spacers/washers will be needed for an FJ60.
OEM late model FJ60 Skid Plate: $50 ($100 at Cruiser Parts)
Extremely clean, rust free, appears to have original paint, came off an '86 from California.
Local pickup only in southern VT.
Spray painted matte black. Some dents, scratches, and rust, but pretty good shape. Tabs for mounting fogs. Came of an HJ60, and will bolt directly up to a FJ62 (wider bumper brackets). Spacers/washers will be needed for an FJ60.
OEM late model FJ60 Skid Plate: $50 ($100 at Cruiser Parts)
Extremely clean, rust free, appears to have original paint, came off an '86 from California.
Local pickup only in southern VT.
Looking to replace my brown fj60 dash with a brown fj62 dash. Anyone parting out a brown interior fj62??? Also looking to upgrade the rear seat belts to shoulder straps ... so looking for fj62 rear seat belt trim pieces and rear portion of seat with headrests.
Motor, tranny & t-case are out, please email me with questions krazyfj@yahoo.com
$400- good running 74 F motor, needs valve cover gasket
$600 for the H41 transmission & 3 speed t-case
$400- good running 74 F motor, needs valve cover gasket
$600 for the H41 transmission & 3 speed t-case
Hey Alex I'd be interested in the top. How much does a set if bows go for now a days. I have a 1980 40.Brand new olive drab OCD soft top. $800. Looks just like this one...
Rick
I don't have any for sale but you can get them from Real Steel cruiser parts for somewhere around $900.
Rick, Try to find a set of 1975+ bows. The b-pillars are shaped differently. You can make an earlier set work with some effort.
Hey guys... I'm on the hunt for an Isuzu 4bd1t engine in good running condition to put in my 60. Willing to buy a whole NPR box truck or GMC box truck with that engine or just the engine. Looking for an engine made in 1989 and up that's an isuzu 4bd1t... NOT looking for the 4bd2t engines that are direct inject and intercooled. If you know of one for sale shoot me a PM. Thanks for the help!
How about a 3B instead?
Hey Splangy, Thanks for the offer 
but im after an isuzu 4bd1t for my 60.
but im after an isuzu 4bd1t for my 60.
Yeah but isn't it easier to find tops for the earlier bows because that's what's around? Also what effort it's required?
The early "B" bow is too wide across the top and the doors won't close correctly.
Really? I thought just like the 74 and older like the 75 and newer you could swap tops. The only difference is with the catch on the doors and ambulance vs hatch. Not arguing, I just want to know since I have a set of early bows I was going to put on my 78 40.
You can see the difference in Ant's thread here:
https://forum.ih8mud.com/threads/oem-style-soft-top.799688/#post-9127259
You can cut about 1.5" out of the top horizontal section of the bow and it will bring the sides close enough together that the doors will seal up right.
https://forum.ih8mud.com/threads/oem-style-soft-top.799688/#post-9127259
You can cut about 1.5" out of the top horizontal section of the bow and it will bring the sides close enough together that the doors will seal up right.
