Official ONSC member buying/selling thread (11 Viewers)

[jynx]

Does anyone have a FJ60 fuse box cover they're willing to part with? Prefer that it has a legible label on the back.

Let me check the parts truck.

 

[Hokierig]

Does anyone have a set of crossbars that would work on the FJ60/62 roof rails? Don’t need a crazy capacity (just enough for a roof box and a few surfboards). Would love a lead on anything local if you’ve got it.

 

[GLTHFJ60]

Let me check the parts truck.

Thank you sir. Will take it if the plastic is not all busted up, even if the label is worn off. I stepped on mine yesterday so it's broken beyond repair

 

[fourtrax]

take a picture of a good one. then print it on a clear label, trim and attach it to the plastic cover.
Amazon product ASIN B01L9E44J8

 

[Malleus]

Thank you sir. Will take it if the plastic is not all busted up, even if the label is worn off. I stepped on mine yesterday so it's broken beyond repair

This just cries out for someone w/ a 3d printer...don't you have an empty corner n your shop?

 

[pkniland]

home made storage drawer. Works good enough but not great. $50. It was made to have room to have the spare next to it

 

[Malleus]

Quick PSA, for all you with brake problems:

I ordered a complete set of Russell Speed Bleeders for all three 80s last week. I had intended them primarily for the trucks that were away at college, since I won't be there and I'm not letting go of my Motive pressure bleeder. I installed a set on the '94 and only one sealed and that was on the rear disc caliper; the other side weeped badly. The two on the front calipers didn't even seat; they did manage to completely coat the suspension and driveway with brake fluid, however.

After a gallon of denatured alcohol and an entire roll of shop towels, and my pressure washer, all was cleaned up and ready for the old bleed screws. When I compared them, I realized someone had replaced the OEM screws with aftermarket, which were all different lengths and rusted solid. To make a long story short, the calipers now have new OEM bleed screws and the Motive flushed the system as expected.

I ran into this a couple of years ago with Dorman knock-off bleed screws, and figured it was just cheap copies and promised myself I would buy Russell's when I got a chance. I'll never go down this road again; Edelbrock must have a Chinese supplier, because their quality control is nonexistent.

 

[Malleus]

home made storage drawer. Works good enough but not great. $50. It was made to have room to have the spare next to it
View attachment 2406398View attachment 2406399

I would never have thought to put a storage drawer on my wheelbarrow. What a great idea!

 

[pkniland]

Trying to undo some of the “improvements” I’ve made. Anyone got the two center console pieces that are in original form?

 

[JohnVee]

@pkniland
I might still have a decent gray console box and lid. I won’t know until next week. And it’s not a solid ‘might’, either. I know I don’t have the tunnel cover.

 

[jynx]

Thank you sir. Will take it if the plastic is not all busted up, even if the label is worn off. I stepped on mine yesterday so it's broken beyond repair

I'll have the wench check her misc parts pile, but it appears that they are missing from both parts trucks.

 

[NCFJ]

Trying to undo some of the “improvements” I’ve made. Anyone got the two center console pieces that are in original form?

View attachment 2406577

I think I still have a grey console Patrick, I'll look tomorrow.

 

[pkniland]

I think I still have a grey console Patrick, I'll look tomorrow.

Thanks Stan

 

[stevezero]

Quick PSA, for all you with brake problems:

I ordered a complete set of Russell Speed Bleeders for all three 80s last week. I had intended them primarily for the trucks that were away at college, since I won't be there and I'm not letting go of my Motive pressure bleeder. I installed a set on the '94 and only one sealed and that was on the rear disc caliper; the other side weeped badly. The two on the front calipers didn't even seat; they did manage to completely coat the suspension and driveway with brake fluid, however.

After a gallon of denatured alcohol and an entire roll of shop towels, and my pressure washer, all was cleaned up and ready for the old bleed screws. When I compared them, I realized someone had replaced the OEM screws with aftermarket, which were all different lengths and rusted solid. To make a long story short, the calipers now have new OEM bleed screws and the Motive flushed the system as expected.

I ran into this a couple of years ago with Dorman knock-off bleed screws, and figured it was just cheap copies and promised myself I would buy Russell's when I got a chance. I'll never go down this road again; Edelbrock must have a Chinese supplier, because their quality control is nonexistent.

I encountered the same thing with russell speed blenders on my 80 and gx470. I was NOT a happy chappy.

 

[uzj100]

anyone. offers. Need them out of my barn.

For Sale - 100 Series - OEM - 18 inch 5 spoke Toyota Wheels from 2004 UZJ100 - Qty. 4 - Raleigh, NC - Will SPlit up

4 OEM 18 inch Toyota Land Cruiser wheels off a 2004 UZJ100 Includes OEM center caps - 4 Includes OEM lug nuts - 20 Fair condition - They have the surface corrosion that many 03/04 Lexus and Toyota wheels had. There is no pitting. Tires have been removed Will deliver within 60 miles of Raleigh...

forum.ih8mud.com

 

[weejub]

Put the Tacoma up for sale in the Classifieds here:

SOLD - Raleigh NC Area: 2004 Toyota Tacoma TRD Limited Double Cab

Key stats: 2004 Toyota Tacoma Double Cab 4WD Limited TRD Off Road

forum.ih8mud.com

 

[Comet]

No description of how it sounds like a tomb inside while you are driving? Love the additions you have done to it in the thread.

 

[Mtbcoach]

Bumping, tire kicking disappearing...$2k SOLD...thanks for others interest

Offering for sale again...I’ve had some soft offers but it’s time for me to let it go and be used instead of sitting around...

Expedition Trailer for sale...

I'm offering my Expedition Trailer for sale to my ONSC family first, if no takers, I will offer it to the WWW. Why? As much as I love traveling in this mode, my lovely spouse prefers more "comfortable" accommodations. She said that if she wants me to have her along, we need to change things...

forum.ih8mud.com

Last time I used it was mooching off Marshall at the Overland Expo East ‘16 at the Biltmore, enjoying the edge of the hurricane Matthew passing thru Sat night, where the trailer & RTT faired well. It survived the bit of weather we had go thru here, it is only lived it’s life exposed to the elements and surprisingly, faired well.

Here it sits today after I gave it a good rinse off with my little electric power washer, frankly amazed that the Camping Labs RTT cover is still water tight and no intrusion from Isaias nor the power washer. All zippers work on RTT, trailer lights work (I towed it down with my Ram filled with camping gear and ...) it’s rough but functional, can be used today (with a battery and/or solar) or give it a rattle can paint job (I know, that extremely offensive FJC yellow is a huge issue, trust me, I know, I’ve been told) or refurbish it by re-skinning with lighter gauge aluminum (easier to make a tighter fit than I achieved with 14g steel) and re-condition the bedwood, or use it as a solid utility trailer for your bikes/kayaks/etc.

I’ll take any reasonable offer, $2500 OBO, will consider trades (things that go pew, vintage enduros/motorcycles)...truth is I need the space. Beach life has it’s pleasures and they come with restrictions, space is of high value and something I don’t have a lot of anymore. Come take it for a test drive at the beach, just take it...

View attachment 2399599
View attachment 2399600

View attachment 2399603

View attachment 2399601

View attachment 2399602

 

[weejub]

2K includes RTT @Mtbcoach?

 

[Mtbcoach]

2K includes RTT @Mtbcoach?

Yes sir, extension for ladder too, in case one wishes to put RTT on top of taller vehicle...