Media Official LX570s Picture Thread (9 Viewers)

Photo/Video/Audio threads

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Looks great, where did you source it from?
The livery was inspired by previous LC models (mostly on 60s) I've seen here on ih8mud and in other countries. I had the color order/pattern changed from dark to light, and the height adjusted by Wrap Factory in Santa Rosa, CA and they wrapped the vehicle in Satin Stealth Tundra.
You'll find different designs of the stripes on the link below:

Screenshot_20240929_070643_Google.jpg


Screenshot_20240929_070724_Google.jpg
 
^ Yeah... why a shorter rack was installed on the LX is beyond comprehension.
 
Damn! I would have picked that up too. I love the RR stuff. It isn't the most trendy looking rack but it's more versatile than most. I run the 6 feet set up rather than the backbone. The BB system requires the 84" rack and I like to swap out the Pioneer for 3 Vortex bars in the winter. The bars make life a bit easier when mounting a Thule ski box or clearing off snow. BB vs 6 feet is a personal preference thing though, you can't go wrong with either. I've had everything from picnics with the family to a weekends worth of gear on the platform.

The platform came off my 100 series, all I had to do was get the 200 series fit kit and adjust the position of the feet on the platform.

What part of Maine are you in? We spend some time there from time to time.
 
^ Yeah... why a shorter rack was installed on the LX is beyond comprehension.
Soccer moms only need to put skis or roof boxes on the rack. Beats flush mount rails that are a pain in the balls to swap to a regular rack tho.
 
Still haven’t gotten a chance to stretch her legs after getting the KO3s and adding an absurdly cheap Rhino Rack but at least it looks good. Probably “done” for a while but would love to trim back some of the bottom of the front bumper to show a little more tire.

IMG_0003.jpeg
 
Still haven’t gotten a chance to stretch her legs after getting the KO3s and adding an absurdly cheap Rhino Rack but at least it looks good. Probably “done” for a while but would love to trim back some of the bottom of the front bumper to show a little more tire.

View attachment 3739689
Viper cut in 3, 2, 1 . . .
 
Viper cut in 3, 2, 1 . . .
Yeaahhhh my buddy had one on his GX460 that I liked which was basically flat across the bottom. I'm trying to figure out an elegant way to remove the little wings on the ends and have it flow into the middle of the bumper. I don't want anything too aggressive, I'm really trying to limit myself to an OEM+ build after going off the deep end on my GX470.
 
Yeaahhhh my buddy had one on his GX460 that I liked which was basically flat across the bottom. I'm trying to figure out an elegant way to remove the little wings on the ends and have it flow into the middle of the bumper. I don't want anything too aggressive, I'm really trying to limit myself to an OEM+ build after going off the deep end on my GX470.
Visually this gets there.
 
What part of Maine are you in? We spend some time there from time to time.
Pretty central with most of the time being spent between Carrabassett Valley and Mount Desert Island.
 
The livery was inspired by previous LC models (mostly on 60s) I've seen here on ih8mud and in other countries. I had the color order/pattern changed from dark to light, and the height adjusted by Wrap Factory in Santa Rosa, CA and they wrapped the vehicle in Satin Stealth Tundra.
You'll find different designs of the stripes on the link below:

View attachment 3737937

View attachment 3737938
looks great

i have been looking to do a gray version of your pattern for a year - with no luck in los angeles
 
Yeaahhhh my buddy had one on his GX460 that I liked which was basically flat across the bottom. I'm trying to figure out an elegant way to remove the little wings on the ends and have it flow into the middle of the bumper. I don't want anything too aggressive, I'm really trying to limit myself to an OEM+ build after going off the deep end on my GX470.
+1 for this.

I'm just trying to bring all the plastic upwards for aesthetic purposes at this point (front bumper, running boards, rear bumper). It all just hangs too low on the '16+
 
IMG_3421.jpeg
IMG_3452.jpeg
IMG_3404.jpeg

Finished up a 6 day fly fishing trip through the San Juan mountains in Colorado. Fished 10 different creeks and rivers and drove over 250 miles off pavement.
Started down in Antonito, went up the Conejos river valley, up and over the pass there to the east fork of the San Juan. Then up through South Fork and Creed to the headwaters of the Rio Grande. Over Stoney Pass (really beautiful), to Silverton, then over Engineer pass (Alpine loop), then up to crested butte via Ohio Pass and Keller Pass. Then I headed home over Cottonwood pass.
I do trips like this every fall to see the colors, fish and take photos. This year it was just my dog and me, slept in the truck and cooked on the tailgate. Good times.
 
View attachment 3740895View attachment 3740896View attachment 3740898
Finished up a 6 day fly fishing trip through the San Juan mountains in Colorado. Fished 10 different creeks and rivers and drove over 250 miles off pavement.
Started down in Antonito, went up the Conejos river valley, up and over the pass there to the east fork of the San Juan. Then up through South Fork and Creed to the headwaters of the Rio Grande. Over Stoney Pass (really beautiful), to Silverton, then over Engineer pass (Alpine loop), then up to crested butte via Ohio Pass and Keller Pass. Then I headed home over Cottonwood pass.
I do trips like this every fall to see the colors, fish and take photos. This year it was just my dog and me, slept in the truck and cooked on the tailgate. Good times.
Love your truck man, was a big inspiration when I bought my ‘18
 
View attachment 3740895View attachment 3740896View attachment 3740898
Finished up a 6 day fly fishing trip through the San Juan mountains in Colorado. Fished 10 different creeks and rivers and drove over 250 miles off pavement.
Started down in Antonito, went up the Conejos river valley, up and over the pass there to the east fork of the San Juan. Then up through South Fork and Creed to the headwaters of the Rio Grande. Over Stoney Pass (really beautiful), to Silverton, then over Engineer pass (Alpine loop), then up to crested butte via Ohio Pass and Keller Pass. Then I headed home over Cottonwood pass.
I do trips like this every fall to see the colors, fish and take photos. This year it was just my dog and me, slept in the truck and cooked on the tailgate. Good times.
Went up the North fork of the Swan River, down Deer Creek, back up Saints John, back down Middle Fork of the Swan. Some rough going on the Mid Fork but good camping at the bottom.

IMG_0759.jpeg


IMG_0767.jpeg


IMG_0765.jpeg


IMG_0769.jpeg


IMG_0768.jpeg
 

Users who are viewing this thread

Back
Top Bottom