Meet "Fat Amy" my Amazon Green 200 Series
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
- Thread starter
- #462
@RTaylor I am happy so far. Have about 2000 miles on them.
They are very rare in the US right now. I think only myself and 1 other have them in the US.
Metal Tech is the go-to site to get them. You will have to call them, as the FCPs are not on their site yet.
I was in Atlanta yesterday. You could have come taken them for a spin if you had wanted to!
They are very rare in the US right now. I think only myself and 1 other have them in the US.
Metal Tech is the go-to site to get them. You will have to call them, as the FCPs are not on their site yet.
I was in Atlanta yesterday. You could have come taken them for a spin if you had wanted to!
- Thread starter
- #464
Well, I did mention that I was in Atlanta for the weekend in the What Have You Done to Your 200 Series thread. 
- Thread starter
- #467
I just ordered a couple more of those that I didn't get on the first go-round. They added the part about uploading a selfie with your Toyota this time.
- Thread starter
- #469
Just finished a quick CAD draft of a 10mm 200 Series strut spacer.
I will extrude the factory dimensions out to a full 0.5", which should get the lift 1" higher. I am working with someone who has a laser cutter who may be able to fab them.
I will extrude the factory dimensions out to a full 0.5", which should get the lift 1" higher. I am working with someone who has a laser cutter who may be able to fab them.
- Thread starter
- #471
That being said, I have nearly $100k of software at my disposal at my work computer, but alas, I have no copy of Solidworks. If anyone wanted to give me a copy, I would be very appreciative!
Did you laser scan this or draw it up?
- Thread starter
- #473
I drew it up. Used an OE spacer I bought from Beno and a analog caliper to get the measurements.
how old school 
- Thread starter
- #475
I need to go to Harbor Freight to pick up one of those new fangled digital contraptions.
Let me know if you want to add some pipes, wires, or ducts to the spacer.
- Thread starter
- #478
Finally got around to installing my OE strut spacers I ordered from Beno. Went from 14.5" from lip of ring to 15.5" after the spacers were installed. So looks like I got another 1" of lift. Pretty cool for only $70 in parts. And yes, I am well aware that I have lost a few of my bolts from my wheels. I didn't torque them enough. 
Oh well, off to trdparts4u to order a full replacement set.
Oh well, off to trdparts4u to order a full replacement set.
