- Thread starter
- #141
Thanks for the business!
The sale has been good - it runs through tomorrow, but I'm out on travel for work till Friday starting tomorrow. Anything ordered Monday-Thursday will head out the door then!
Lumberjack Engineering: Exquisitely Engineered solutions for the 100 Series Platform.
- Thread starter LJE
- Start date
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
The sale has been good - it runs through tomorrow, but I'm out on travel for work till Friday starting tomorrow. Anything ordered Monday-Thursday will head out the door then!
- Thread starter
- #142
My new bulk order of Wolfbox G930s came in! Go grab yourself one + the LJE mounting kit here!
These second row heater duct extensions have also been pretty popular - there's two versions: one optimized for the factory carpet/low profile all weather mats, and one version optimized for the tall weathertech mats! Both versions available here:
These second row heater duct extensions have also been pretty popular - there's two versions: one optimized for the factory carpet/low profile all weather mats, and one version optimized for the tall weathertech mats! Both versions available here:
Y'all, Alex told me he'd braid his beard like pigtails if he sells 100 sets of the vent extensions.
I think he should!
I think he should!
- Thread starter
- #144
Ordered a wolfbox mount....
Looking for a 3D print for a gauge pod, pillar area, for one of these.
Or open for another area for install, not on steering column.
www.innovatemotorsports.com
Looking for a 3D print for a gauge pod, pillar area, for one of these.
Or open for another area for install, not on steering column.
MTX-D: Digital Dual Function Ethanol Content % & Fuel Temp Gauge Kit, Complete
MTX-D Ethanol/FuelT
www.innovatemotorsports.com
- Thread starter
- #146
Pillar mount for one of those is totally doable! I'll want to put a boost & wideband A/F gauge there once I put the TRD supercharger I've got on my LX, so I was already planning on scanning that area.Ordered a wolfbox mount....
Looking for a 3D print for a gauge pod, pillar area, for one of these.
Or open for another area for install, not on steering column.
MTX-D: Digital Dual Function Ethanol Content % & Fuel Temp Gauge Kit, Complete
MTX-D Ethanol/FuelT
Any chance you could ship me that gauge or get me some good measurements? I'm usually a sub-2 week turnaround for designs, so it wouldn't be out of your hands for long.
Was there ever a year where A-pillar air bags started to show up in these.
I know some of the later years have side curtain. But not sure about A-pillar also.
03+ have curtain airbags down the A-pillar.
- Thread starter
- #151
Sure does! That's the same size as the G900/G840H/G850, so just make sure to select that option on the website!
Interesting discussion on the side curtain airbags - hadn't thought about that one. Hmmmm.
TOYOTA LANDCRUISER 100/105 SERIES - SINGLE GAUGE PILLAR POD SUIT 52MM GAUGES
PLEASE ALLOW 1-2 WEEKS TO PROCESS ALL PILLARPOD ORDERS AS EACH ONE IS MADE TO ORDER TOYOTA LANDCRUISER 100/105 SERIES - SINGLE GAUGE PILLAR POD SUIT 52MM GAUGES Made of ABS plastic Deepest on the market 52mm holes are included NO holes cut option also available *Does not suit VDO gauges Can...
www.4x4offroadworld.com
I thought about one of these but $90 to ship is making it not as easy to buy as I thought.
- Thread starter
- #155
I guess I assumed those airbags would come sideways to cover the side window - I guess I should check to see if they do that, or if they're shooting out to cover the windshield area in front of you.
(as I typed that, I realized that when you said 'forward' you probably meant forward as in towards the windshield, not towards the driver)
Yeah, ouch, that's not cheap. From what I can read, these pillar airbags are usually designed to push the column cover towards the windshield, so maybe it'd still be OK.TOYOTA LANDCRUISER 100/105 SERIES - SINGLE GAUGE PILLAR POD SUIT 52MM GAUGES
PLEASE ALLOW 1-2 WEEKS TO PROCESS ALL PILLARPOD ORDERS AS EACH ONE IS MADE TO ORDER TOYOTA LANDCRUISER 100/105 SERIES - SINGLE GAUGE PILLAR POD SUIT 52MM GAUGES Made of ABS plastic Deepest on the market 52mm holes are included NO holes cut option also available *Does not suit VDO gauges Can...
I thought about one of these but $90 to ship is making it not as easy to buy as I thought.
Glad to hear it! Those are both customer-requested items, and they definitely are a quality of life improvement!
- Thread starter
- #158
New product incoming!
These are accessory mount panels that replace the 2nd & 3rd row seat belt mounting brackets! Like some of my other recent designs, this one combines the best that 3D printing & plasma cutting has to offer.
For both mount panels, the upper brackets reuse the big honkin' bolts used to secure the upper seat belt mounts into place. The lower brackets slip in between the gap for the upper & lower trim panels, and "hook" onto the bottom of the upper trim panel. As you tighten down the lower mounting bolts you pull up on this brackets, which locks the entire thing into place and prevents movement. It's really secure!
I think pricing will be $90/one, $170 for two, and $330 for all four. That includes the brackets printed in carbon fiber ASA, plasma cut steel panels (raw/bare), and all stainless steel hardware.
Interested in some? Please leave a comment below or shoot me a message - trying to figure out how many sets of brackets to ship to @MongooseGA to get listed over on The Artisan Garage!
These are accessory mount panels that replace the 2nd & 3rd row seat belt mounting brackets! Like some of my other recent designs, this one combines the best that 3D printing & plasma cutting has to offer.
For both mount panels, the upper brackets reuse the big honkin' bolts used to secure the upper seat belt mounts into place. The lower brackets slip in between the gap for the upper & lower trim panels, and "hook" onto the bottom of the upper trim panel. As you tighten down the lower mounting bolts you pull up on this brackets, which locks the entire thing into place and prevents movement. It's really secure!
I think pricing will be $90/one, $170 for two, and $330 for all four. That includes the brackets printed in carbon fiber ASA, plasma cut steel panels (raw/bare), and all stainless steel hardware.
Interested in some? Please leave a comment below or shoot me a message - trying to figure out how many sets of brackets to ship to @MongooseGA to get listed over on The Artisan Garage!
The rear pillar mount is neat. It would be a good fire extinguisher location
