I didn’t want to go too long without sharing an update, especially considering how instrumental the support, feedback, and encouragement from the IH8MUD community have been in getting this project to where it is today.
LX470: Manufacturing...
I'd be remiss if I didn't mention this here on 'Mud - I'm running a sale on my 2UZ fan clutch wrenches through next Friday, 11/7/26. Use the code "TIMING" and save $5 to make your next timing belt job a little easier!
The short answer is "I don't know".
I ended up replacing Cats, O2 sensors, plugs, had injectors cleaned, tested, new orings and seals. After all that, I had it happen a couple more times.
I tore into the wiring behind the glove box, suspecting...
(don't mind my cracked trim - its been removed/reinstalled something like 25 times now :alien: )
Alright, a proper update for everyone who has been following on mud.
The new renders show the revised housing, control labels and silver...
Got some prototype brackets drawn up for the switch and sensor yesterday.
Attempting to make it plug & play so the harness doesn’t have to be modified or extended.
I’m trying to find a 90 degree vapor hose that’s OEM if I can- suggestions...
I now have a client's 100 series in. R&D has started on these and will be emailing an update to those who filled out our survey. If you haven't done so already and want to be better updated, please do fill out the survey. :)
100 Series Brake...
Several months ago @Godwin and I made a visit to a local junkyard after I found two 1977 2wd Toyota pickups from marketplace. I had been looking for a disc brake truck for a guy for a while to convert his from front drums to factory discs. When...
ive been running E range KO3s in 275/70/18, and they're just about perfect for the 100 w/ stock everything
I did have some minor rubbing on the front inner fender liners, but that was fixed easily with a heat gun
Thanks to everyone for the support here on mud. Genuinely appreciate the people who understand how much engineering, validation and low-volume manufacturing sits behind something like this. We’re going through everything down to details most...
I placed my deposit for 03 LC version on Friday. While I have followed this thread, last week I found Alpine Siege's instagram/FB, I would think your main target audience is here on MUD.
Personally, I want to know if after installing the Alpine...