Looking at Buying a '95

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Apr 12, 2018
Threads
95
Messages
331
Location
San Jose
Hey Guys,
Looking at getting a bone stock '95 with 160K, no lockers. The plan would be to install harrop E lockers down the road, but do a lift, etc in the near term and build it up as a trip rig. I haven't done much with Toyota 4x4s up till now so I wanted to ask what the best way to inspect the front end for wear and if there is anything specific to a '95 to take a look at? I've been doing some reading so I'm planning to inspect the basics like the HG, etc. Asking price is $7600 and other than a cracked dash its pretty clean.
 
Well, ‘95 is the best year for the 80 series....and if it’s white, you will have the best color for an 80 as well. This is based on very scientific research studies of time spent with my own ‘95 white 80 series! Post up some picture when you buy it.
 
Sounds like about where you ought to $$ for a stock 160K w/ a great Carfax & physical condition to back it. Also sounds like you’re doing the homework so you know what to look at.

To your question, knuckles puking runny grease mean it probably never had a front axle service yet - aside from that it’s a standard solid axle where you check the ball joints & wheel bearings, but destroyed ones are pretty evident on a shakedown drive.

I’m partial to the ‘95-‘97 for OBD2, plus the FF rear on all in that range.

Tan interior parts are more rare/$$$ in good condition than the grey, so if you have sagging visors or whatever, grey parts are more easily found IME.
Since you mentioned the cracked dash.
Then again, I used latex caulk, never gave it a 2nd thought. That poor LX450, I pity whoever has it now.
 
First post, no cruiser yet. Must fight urge to welcome to the family until he brings the truck home. (Spoken in a whisper with head tilted down towards armpit)

There is an easy to follow write up on Slee.com for the inspection of a "new to you" 80 series Land Cruiser. It will walk you through the major systems for inspection prior to purchase. These are great trucks with a long service life. A lot of the parts can be rebuilt rather than replaced. The mileage is really really low. Mine hit 340K last year so there's a lot of life left in the one you are looking at. MUD has a quirky search function to see what others have done before you. If it were me, I would use google to search for topics you need education on and click on the MUD forum links.

Post back your decision. I am itching to welcome you to the family true MUD style.
 
Front end wear isn't really relevant. You're going to have to rebuild the front axle (seals, gaskets, lots of moly grease, optionally bearings and wipers) at that age and mileage anyway, unless it's been done recently by the PO.

Plan on $2k-ish in parts to fully 'baseline' the vehicle. Again, that's assuming a typical owner and not one of us 'mud nutjobs.
 
Well, ‘95 is the best year for the 80 series....and if it’s white, you will have the best color for an 80 as well. This is based on very scientific research studies of time spent with my own ‘95 white 80 series! Post up some picture when you buy it.

The 95 is a tricky year model to smog in Phoenix/Tucson. It usually is an OBD II rig, but it will be tested as an OBD I Rig: lift the hood and sniff the tailpipe. Not a fatal flaw but confusing on your first visit to the smog station.
 
That is the biggest advantage of a '95. Doesn't matter if the check engine light is on (thanks P0401), passes the sniffer with flying colors!
 
As stated, thats the best year. And I would argue conclusively that red is the best color. Hands down. Hopefully it works out and you find you're a new 80 owner.
Always use the search function before posting a question. At least try...
 
To me 'Sage' is the best color ever offered. Followed by Nightshadow (dark blue) and then Moonglow Pearl (what I have).

But ANY 80 series is an desirable vehicle to have.
 
Well fingers crossed its still there when I go to look at it Saturday and its not in bad shape. I'll post some pics if I end up taking her home. It should be a nice step up from a CUCV for less local exploring and more trips around the southwest. I'll have to get used to not hearing the diesel though.
 
So what's the deal on 95s and OBDI or II? I thought they were all OBDII, though I have seen that some have the old dash design and some have the new. Is it a 95.5 thing, like with some VW's?
 
Well, went and took a look at it and ended up negotiating down a bit and taking her home. Overall looks to be in pretty good shape. I can't believe how tight the steering is compared to the Chevy and Dodge truck's I've had. The biggest issue is sun damage to the paint and plastics, but hey its going to be going on trails so I'd probably feel bad if it had a factory fresh paint job still. As expected there are a number of little things I'll be doing to it to baseline it up from someone's old DD like fix the antenna, burnt out bulbs in the dash, address an oil leak, replace some functional dry rotted vac lines, etc and once all the PM is done get to making it a good trail rig. Overall seems like a pretty solid rig. 159K on the clock. Also since this is my first time on the forum here is a pic of the CUCV I've had for the last 10 years this LC will be replacing. I'll probably be on here a decent amount getting up to speed on the LC.

IMG_3133A.webp
IMG_3132.webp
IMG_3134A.webp
IMG_3135.webp
 
Back
Top Bottom