Hopeful Romantic

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Aug 17, 2022
Threads
2
Messages
49
Location
Mesa, Arizona
Hey guys!
I’ve been keeping my eyes peeled for a potential start to my next big self inflicted PITA. I’ve always been a huge Toyota fanboy. I currently drive a Tacoma, wife has a 4runner, and I learned to drive on an old toyota. I figured what better way to occupy (or consume) my time than starting a project with the flagship Toyota that started it all.

I can across this 1968 FJ40 this week and am going to take a look at it this weekend. It’s had a 327 swap(may end up reversing that, but we’ll see) and has recently had a bit of resto work done by the current owner.

I’m not entirely sure where the final product we’ll land, but like an artist with his clay, I’ll let my hands and the art itself help me decide.

Let me know if there are any red flags, or if there is any reason I shouldn’t make this leap. I love wrenching and working on vehicles, so the hard work doesn’t scare me (I’m a diesel mechanics son, so nothing really does anymore) I just want to make sure I’m making a semi wise decision.

I’m excited to start this journey, and from the lurking I’ve done so far on this forum, it seems like I’m in decent hands with this community.

DACD7870-250D-4DB4-8A64-17DBB289DCAD.webp


760C653D-02C1-4D1F-BDD7-A81174B4F7C1.webp


A180D591-1DDA-4D8C-B8EB-533AC47476F2.webp
 
Possibly cut a big hole in the dash for that new gauge pod

Chrome, wheels which are easily reversible. Diamond plate is a negative for me but could be clean underneath?
Tub could be cut for the flares which is a big negative also

Depends what direction you want to take it
 
At first glance I would say it's a good start depending on how much you will get it for. But seems like a good foundation.
Does it have doors, hard top? Look for rust on those spots below the door jams.
It doesn’t have the hard top, but it does have doors and a full soft top. And I’ll make sure to check those spots.

He’s asking 15k, but I’m confident I can get him down a bit from there
 
Possibly cut a big hole in the dash for that new gauge pod

Chrome, wheels which are easily reversible. Diamond plate is a negative for me but could be clean underneath?
Tub could be cut for the flares which is a big negative also

Depends what direction you want to take it
I feel the same about the wheels and plate. Wheels are an easy swap, and if the plates a little thrashed underneath, I should be able to weld on a new piece fairly easy right?
 
If you want to retire to stock, pass. If you want a 4x4 to explore back road or do some rock crawling, go for it.
I don’t know if I’m going to retire it completely back to stock, but I won’t be rock crawling it. Mostly just a project to keep me busy. There’s aspects I’d like to restore, like the jump seats and potentially hunting down an elusive hard top.

It’ll mostly be used to coffee runs and weekend putting around town.
 
Am I seeing a spring perch lift and shackle reversal? What is the running gear? Toyota? GM?
That’s what I gotta check out.

He’s sending me more detailed pictures tomorrow.

I believe it’s mostly Toyota with the exception of the 327 swap and the trans. It’s a 4 speed which I’m assuming is the Muncie sm465 but I don’t know for certain right now
 
Being that it’s a 1968 that 327 might be a Downey conversion. I hear they were popular and done well. As I understand it, local Los Angeles Toyota dealers would deliver a brand new truck to Downey for the customer as a special option? Others may know more on this.
 
Being that it’s a 1968 that 327 might be a Downey conversion. I hear they were popular and done well. As I understand it, local Los Angeles Toyota dealers would deliver a brand new truck to Downey for the customer as a special option? Others may know more on this.

@Downey would know lol
 
Downey did NOT do engine conversions for Toyota Motor Sales or Landcruiser owners, Con-Ferr did in the 1960's until they had a falling out with Toyota. What Downey did was manufacture and sell about 160 Chevota engine conversion kits per month all during the 1970'-90's. By the 2000's the purist appeared, and our V8 conversion kit sales fell way off. I'm thinking the Mud post about "going back to stock" has the greatest number of readers ???
 
Manual or power steering gear box? If manual, don’t count on being able to rebuild it. Parts have dried up.☹️
 
Manual or power steering gear box? If manual, don’t count on being able to rebuild it. Parts have dried up.☹️
What Happened ? I know SOR used to rebuild them with exchange, but that seems to have gone away as well. There were not that many parts in the early box so what parts have gone away? Seems every year my FJ40 is destined for a museum because of parts.
 
So here’s an update, he sent me some more pictures.

I asked him to send me some engine pics and all of the rust spots because I’m driving 80 miles to go check it out.

He promises that the frame and the rest is in good condition.

These rust spots are on either side of the tailgate on the tub.

I also found out that it does have a perch lift and it has been converted to disk brakes.

1958E2B8-0632-4A8F-8883-9420460CB4A8.webp


242C1555-E4FC-4466-9400-4E849A71BD29.webp


7E7BFB35-B7B5-42CA-849C-07E92AF05FED.webp


6FB3D263-0993-4233-8D4C-4722F5177E20.webp


D61F1D13-C16B-46F1-A3B8-E6CB00AECA43.webp
 
Back
Top Bottom