Head work- $980!!!!!

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Jun 12, 2008
Threads
64
Messages
522
Bit shocked when the machine shop called and the bill for my valve grind and head work is WAY more than quoted. Says he had to deck the head a bit and setting the valves was a bitch, seems like I may have picked the wrong shop..........
Or I am over reacting!

Cheers P
 
Bit shocked when the machine shop called and the bill for my valve grind and head work is WAY more than quoted. Says he had to deck the head a bit and setting the valves was a bitch, seems like I may have picked the wrong shop..........
Or I am over reacting!

Cheers P

Sheeesh, it used to be $50 at the corner of Broad and Pine in Philly... Oh sorry...
 
Bit shocked when the machine shop called and the bill for my valve grind and head work is WAY more than quoted. Says he had to deck the head a bit and setting the valves was a bitch, seems like I may have picked the wrong shop..........
Or I am over reacting!

Cheers P

If the work is done well this is perfectly in line for a valve job with decking.

If they quoted a lot less, there is a mistake there.
 
If the price changes substantially from the quote I expect to be contacted before the work proceeds. Maybe that's just me.
 
this is perfectly in line for a valve job with decking

On what planet? $1k for a head re-surface and valve adjustment is a highway robbery. Most folks pay $350~500 for this. The shop said it was 'harder than expected'. Tough nuggets. Maybe they shouldn't be running a machine shop.
 
I know at my shop if a job is quoted and then more stuff is needed and it is done without customer notification and approval, they just got a bunch of free stuff.

FWIW my Motor labor guide has a valve grind and making all necessary adjustments at 18.4 hrs.
That's with the head removed.
 
yup, they're reaching. Say you'll only pay the quoted figure and see what happens.

(If you play it cool you'll likely prevail, but be prepared to be without your head for a bit...)
 
Original quote 'in the 500 range' when he called to day he said the head needed resurfacing and the valves where harder to set up than expected. I agree a call was required and if explained I would have oked the work, somewhat pissed as cash is tight and there are other things I wanted to do that I can not if he will not stick with his original price.

Pissed peter
 
Well, "in the 500 range" doesn't sound like a solid quote. You can try to hold him to it but it might be best to meet in the middle.

Typed using my thumbs.
 
On what planet? $1k for a head re-surface and valve adjustment is a highway robbery. Most folks pay $350~500 for this. The shop said it was 'harder than expected'. Tough nuggets. Maybe they shouldn't be running a machine shop.

Regrinding the valves, putting in new valve guides and setting the lash is a lot more work than a valve adjustment, per the origional post.

Need to compare apples to apples here...not apples to oranges. :grinpimp:
 
Original quote 'in the 500 range' when he called to day he said the head needed resurfacing and the valves where harder to set up than expected. I agree a call was required and if explained I would have oked the work, somewhat pissed as cash is tight and there are other things I wanted to do that I can not if he will not stick with his original price.

Pissed peter

well, OK, so you didn't have a real quote then. You're not on solid ground. There are 2 people you should be pissed at...:) What does "in the 500 range" mean, exactly?
 
Regrinding the valves, putting in new valve guides and setting the lash is a lot more work than a valve adjustment, per the origional post.

Need to compare apples to apples here...not apples to oranges. :grinpimp:

Isn't that what a valve adjustment at a machine shop is? Minus the new valve guides. My local shop is charging $36 for the resurface and $429 for the valve grind. Grinding the valves is how I understood most shops do it and don't bother with messing around with the shims...

What does "in the 500 range" mean, exactly?

Well if you apply the KISS principle, 'in the 500 range' means $500.00 to $599.99, not $980 :flipoff2:
 
New guides, new valves, head surface, do valve clearances will cost you $1500 + minimum here using genuine parts.

can save $300 using chinese copy parts, that look genuine.
 
Yep way overcharging on their end. I had my head cleaned, pressure tested, resurfaced, valve job, valve clearance set, and had some bad spots welded, and still only cost $300.
 
It all comes down to how much time they spent on it. Cutting seats and valves is not the same as lapping and adjusting the valves. It is on the higher side but I paid $800 for the same work with 3 new intake valves.
 
if you have a piece of paper or an email with a firm price on it, you have a quote.
if you called them up or stopped in to ask about it and they said "about 500", you have an estimate.
 
Back
Top Bottom