For Sale / Wanted Thread

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

I have 2 spare Toyota engines that I’d like to get rid of to free up some space. A 1FZ-FE, and a 3RZ.

Honestly, I don’t anticipate making a lot off of either of them. Does anyone know of an engine builder, or someone who’d like a spare engine to rebuild?
 
Update: The 1FZ has been sold!

I figured I could also give some more details on the 3RZ as well. It was an engine out of a 98 4Runner, so the distributor style head. It has a 1 piece intake, and header style exhaust manifolds. I’ve got the airbox from a T100 intake, and I’m pretty sure all the cooling pipes as well. It’s also the rear sump oil pump for solid axle swaps.

I was told one of the rings started to go bad, but I never opened it up to confirm.

IMG_3075.webp


IMG_3077.webp
 
Four 285/65/18E Falken Wildpeak A/T AT3W tires. OD:33, OW:11:50. <5k miles with no flat repairs or other visible damage. They look almost new.
They were takeoffs from a Land Cruiser and I purchased them a couple of years ago for a relative’s three-quarter ton truck, but he did not use them because he would have had to purchase 18 inch wheels and he decided not to do that. They’ve been in storage for the last couple of years. Date codes are 4120 and 4220.
Located in Colorado Springs. Asking $550 OBO for the set.

Update: SOLD!
 
Last edited:
I'm looking for a pair of the coolant temp sensors from the driver's side of the 1FZ-FE head. I just want to do some resistance testing, so I'd be happy to borrow them, but I'll buy them, too, if they're cheap.

  • 89422 - SENSOR, WATER TEMPERATURE (FOR E.F.I.) - 89422-35010
  • 83420 - GAGE ASSY, WATER TEMPERATURE SENDER - 83420-16040
 
I need some 5052 aluminum scrap in 0.090" thickness, if anyone has any, or knows where I can find some. Metals Supermarket has it, but they want $22/ea. for the smallest piece they'll cut (3" X 3").
 
I need some 5052 aluminum scrap in 0.090" thickness, if anyone has any, or knows where I can find some. Metals Supermarket has it, but they want $22/ea. for the smallest piece they'll cut (3" X 3").
Try Glaser steel. I think they do aluminum too. They're pretty helpful
 
FOR SALE- 80 Series Ironman Winch Bumper with Engo 12000# Electric Winch and LED lighting. I think I maybe used this winch twice. $1200. Can deliver to Denver/Colorado Springs/Pueblo areas. Also have OEM 80 series doors and a fender for sale. All are rust free. I can photos of these items on request.
Right Front Door $$500
Right Front Fender $425
Right Rear Door $500
Left Front Door $400
Left Rear Door $400

80 Ironman Winch Bumper.webp
 
Garage Sale - North Colorado Springs

Hey guys, I’ve got a number of things for sale! Most of it has low miles and use (like 10-30k max), and was removed as I was figuring things out with my builds. Most of it is for an 80 series, however, some of the rear springs could be used on both the 100 and 80 (ome and tough dog springs). The suspension faq in the 80 series forum has all the specs you need for all of these springs.

Here’s what’s for sale:
1. Slee 4” medium front springs for 80 series. $100
2. Slee 4” heavy progressive rear springs for 80 series. $120
3. OME 864 rear springs for 100 or 80 series. $100 heavy loads, but great riding spring with rear bumper and decent load out.
4. OME 868 rear springs (for super heavy loads, towing frequently and/or the whole family’s coming with full armor, drawers etc..) for 80 or 100 series. $100
5. Tough tog tourflex dual rate rear springs for 2-2.5” lift (2f-949) for 80 or 100 series. Sits about the same as 864’s with similar load.
Awesome riding spring. We still have tourflex on the rear of the 100, we just needed the 3”. $150 (340 new plus shipping).
6. Dobinsons 1” rear spring spacers $25 for 100 or 80 series
7. Slee 2” front bump stop drops $25 for 80 series
8. Ome adjustable rear panhard bar for 80 series. $150
9. Delta 3” rear panhard riser bracket for 80 series, includes brand new hardware. SOLD
10. Orange boxx fabrication rear 100 series window molle panels with hardware included. $100
11. Complete set of tan 100 series weathertech floor mats minus the cargo area (practically in like new condition). We ended up going with black. SOLD
12. Tan third row seats for 100 series. In like new condition. $$free to a good home. GONE
13. Dobinsons ims front 80 series shocks for 4-5” of lift. Part #ims45-60912. These may have like 3-5k miles on them. I decided to go with longer springs, therefore needing longer shocks. $400
14. 80 series Front runner slimline full length roof rack with extra cross bars to make it a solid platform. I have all new mounting hardware for it (never used), and the touch up paint spray can also from front runner for small touch ups (never opened). Also included are 270 awning brackets and tie down eyelets. $700
15. Brand new rear landtank single cardan driveshaft for late model 80 series, 37” long with .95” wall tubing. I needed a double cardan, but this should be perfect up to about 4” of lift with adjustable uppers, and be great for lower lifts as well. Has maybe 50 miles on it. $550 (no shipping to pay since you’d pick it up)!

Shoot me a pm when you’d like to purchase, and I can also send you more detailed pics of each item via text, if you’d like. I’m available most evenings after 500pm for stopping in.

Thanks,
Jason
View attachment 3925790
Long shot but if you still have the IMS shocks. I am in need of them. Thanks!
 
Advance Adapter 700R4 FJ60 T-Case $600

 
Factory 16" wheel from 2001 LX470. Includes 275/70/R16 tire suitable for a spare. $45 OBO. Located in Colorado Springs.

SOLD!

image0.webp


image1.webp


image2.webp
 
Last edited:
OME 2860 medium duty rear coil springs in excellent condition. Used for a couple of years on my 2001 LX 470. Selling after I switched to heavy duty springs after installing dual swing out rear bumper. $65 OBO for the pair. Located in Colorado Springs.

IMG_9193.webp
 
Back
Top Bottom