CruiserCult 40 Series Product offerings

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Hey all! Happy to add a new 40 offering to the store. These are new OEM fusible links for 80-84 FJ40/FJ45s.
fj40 fusible link.webp


We also restocked column shifter bushings, horn contact plates, wire harness frame clips, fuel pumps and more.
As stated on the store, we also have a shipping pause until Jan. 7th . Thank you for the support all! :cheers:
 
Hey everyone! Time for a super cool and rare brochure we just scanned and uploaded. :) I believe it's from 1967, but not 100%. Also assuming Australian market but there are a mix of LHD and RHD, so it could be a general world catalog? Either way, it's an awesome brochure full of great photos and content.
It's been a great year thanks to you all! We have a lot more literature and ideas for products on the way to keep the fun rolling forward. :cheers:
1966 67 Australia ?.webp
 
Hey everyone! Testing the waters on this product.
I recently assembled/made my own custom body mount kit for my FJ40 using a combination of Energy Suspension rubber parts, OEM bolts and custom welded and plated metric plates. People expressed interest for their own trucks. I ran the numbers on costs for supplies and time and the hardware kit alone as a product will run $180 (you supply your own rubber bushings from Energy Suspension). If we supply it all, the kit will cost $350.
We are going to open up a pre-order for this product. We are looking to get a minimum order volume of 5 before pulling the trigger and keep it open for two weeks. If we meet the 5 order bar after two weeks we will proceed with construction these kits. If we don't meet the 5 order minimum people will get a prompt 100% refund. You can purchase HERE. Two week period ends March 27th.

IMG_7872 2.webp


IMG_8130.webp
 
Last edited:
numby said:
What's the diff between the above and what you offer on your site...

cruisercorps.com

Body Mount Set FJ40, BJ 1958-1978

Land Cruiser FJ40 Body Mount Set Energy Suspension
cruisercorps.com cruisercorps.com

What am I missing here? Thanks
Click to expand...
Good question, I guess I better explained it in my build thread. This kit is for people who want to use OEM hardware for their body mounts. Current aftermarket kits use SAE bolts. I personally would always rather use JIS/OEM hardware on my cruisers. Just seems so right. So I developed this kit for myself. To pull that off the plates have to be remade with metric nuts and get plated and OEM bolts sourced.
Basically, this kit is for the discerning cruiser owner. ;)
 
Cruiser Cult said:
Hey everyone! Testing the waters on this product.
I recently assembled/made my own custom body mount kit for my FJ40 using a combination of Energy Suspension rubber parts, OEM bolts and custom welded and plated metric plates. People expressed interest for their own trucks. I ran the numbers on costs for supplies and time and the hardware kit alone as a product will run $180 (you supply your own rubber bushings from Energy Suspension). If we supply it all, the kit will cost $350.
We are going to open up a pre-order for this product. We are looking to get a minimum order volume of 5 before pulling the trigger and keep it open for two weeks. If we meet the 5 order bar after two weeks we will proceed with construction these kits. If we don't meet the 5 order minimum people will get a prompt 100% refund. You can purchase HERE. Two week period ends March 27th.

View attachment 4102291

View attachment 4102292
Click to expand...
Yep, this scratches an itch I have. I don't want unnecessary SAE hardware if I can avoid it. Thank you for over this as an option. Hopefully it hits the minimum.
 
Bad Mojo said:
Yep, this scratches an itch I have. I don't want unnecessary SAE hardware if I can avoid it. Thank you for over this as an option. Hopefully it hits the minimum.
Click to expand...
Thank you! Really appreciate all your support. :cheers:
2 more kits to reach the 5 threshold :)
 
Cruiser Cult said:
Good question, I guess I better explained it in my build thread. This kit is for people who want to use OEM hardware for their body mounts. Current aftermarket kits use SAE bolts. I personally would always rather use JIS/OEM hardware on my cruisers. Just seems so right. So I developed this kit for myself. To pull that off the plates have to be remade with metric nuts and get plated and OEM bolts sourced.
Basically, this kit is for the discerning cruiser owner. ;)
Click to expand...

My OEM mounts are still in great condition (and I'm not flush with cash right now) so I hope you'll offer these in the future. I wouldn't have any problem with pre-ordering and waiting until the order log fills up. Like others I really hate using SAE hardware. Fine for my Chevy - not for a 40.


Also - sorry for fumbling the reference link. I had a shoulder injury and may have been over medicating that morning. 🙏
 
You must log in or register to reply here.

Share this page

Back
Top Bottom