Coolant overflow bottle (FAQ)

[Poser]

I ordered these up from CDan - bracket is no longer available...

Toyota lists them as:

16480-90A00 - Reserve Tank
16405-90A03 - Cap Sub-Assembly

Just need to find a bracket off an old 60...

Incorrect; I just received a new bracket this morning....


16611-61020, same as in the previous pictures posted.

 

[tmarx]

FWIW

 

[PabloCruise]

Incorrect; I just received a new bracket this morning....


16611-61020, same as in the previous pictures posted.

Interesting. CDan told me I was SOL when I went to order.

I got a used one -

 

[Rigger]

Bumping this old thread to add my junk. I got the 60 series setup that Poser suggested. (All part numbers good, and all parts available; keeping it all Toyota!) I used a piece of fence hardware as an offset, and added a few bolts.

 

[Poser]

Looks good Rigger man!

 

[PabloCruise]

Bumping this old thread to add my junk. I got the 60 series setup that Poser suggested. (All part numbers good, and all parts available; keeping it all Toyota!) I used a piece of fence hardware as an offset, and added a few bolts.

Looks clean!

 

[Rigger]

Thanks!

Somewhere in this thread, someone wanted to know the price of these pieces. I looked around for the receipt, but cannot find it. IIRC, the bottle, cap/hose assembly and bracket were around $80 total from C-Dan.

BTW, pay no attention to that shelf bracket battery hold-down device in those pics! That thing is uber-redneck!

 

[Pighead]

Good, now get rid of that metal fan!

 

[craptabulous]

early 90's astro van , vented cap on it . didn't cost me anything .

and yes for some reason i like to take pictures of my thumb .

 

[Poser]

Apparently there is ambiguity in this thread.

Here are the part numbers and pictures of the OEM pieces that ARE AVAILABLE 24 NOV 10.











The new OEM pieces and part numbers:




16480-90A00 - Reserve Tank
16405-90A03 - Cap Sub-Assembly
16611-61020 tank bracket

 

[middlecalf]

Bumping this old thread to add my junk. I got the 60 series setup that Poser suggested. (All part numbers good, and all parts available; keeping it all Toyota!) I used a piece of fence hardware as an offset, and added a few bolts.

Nice setup, only thing I might do different is locate the overflow to the other side of the bottle so in case of overflow it doesn't dump coolant on my light/wires (or extend the overflow length to below the wires).

 

[AlexJet]

Its been nearly 1.5 years since the last post. I hope the parts are still available from the dealer... I need a set for my '74

 

[AlexJet]

Just called my local Dealer.
16480-90A00 - Bottle - $112 CA warehouse only
16405-90A03 - Tubes - $56 CA warehouse only
16611-61020 - Bracket - $61 Special Order

Does anyone knows Toyota alternative? Kind of pricy of 220+tax for an overflow bottle...

 

[tyama]

HI, I got one from a fellow mudder who was parting out a 60 series. It was used, but cleaned up well and cost 20 bucks. Cheers, ty

 

[69fj4069]

I bought a hot rod stainless overflow Botle off eBay. The mounting tabs lined up with the top two fan shroud bolt holes I just had to enlarge them slightly with the dremel. It was super easy.

 

[AlexJet]

I bought a hot rod stainless overflow Botle off eBay. The mounting tabs lined up with the top two fan shroud bolt holes I just had to enlarge them slightly with the dremel. It was super easy.

Any pictures of that?

 

[PabloCruise]

Just called my local Dealer.
16480-90A00 - Bottle - $112 CA warehouse only
16405-90A03 - Tubes - $56 CA warehouse only
16611-61020 - Bracket - $61 Special Order

Does anyone knows Toyota alternative? Kind of pricy of 220+tax for an overflow bottle...

You must be getting charged full bore.
Call C-Dan, or one of the many other parts professionals that help take care of our Cruisers!

 

[AlexJet]

You must be getting charged full bore.
Call C-Dan, or one of the many other parts professionals that help take care of our Cruisers!

Those are prices in Canada, but still allot.

 

[69fj4069]

Any pictures of that?

I will try to get one in the morning here is a link
3" x 10" Polished Stainles Steel 34 oz Radiator Overflow Tank Chevy Ford Mopar | eBay

 

[FJ40 Newbie]

Bought an aftermarket one at advanced auto parts for $12.99 bent the tabs and it mounted right up to my radiator. Hard to see in the pic, but looks great.