Arizona Classifieds / For Sale / Wanted
- Thread starter blatant
- Start date
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
Pm sent
Hey there! Anyone got a arb bumper for a 80 series in phoenix area ?
I’m a guy… but I’m not in a position to take on a project right now. But I might be able to give pointers if you need any.
Built and installed this 24’ gate and concrete threshold last summer
Last edited:
@justweldit comes to mind - he made the tube doors for my 40 - AFAIK he moved to Northern AZ
Shawn Engard – Made In Clarkdale – 38th Annual Art Showcase
madeinclarkdale.org
Last edited:
Free now. Come get it before it gets tossed.
Bump It Offroad 80 Series Skid Plate
I bought this from BIO about 2 years ago and never installed it. I have since gone a different direction and need it gone.
I have the plate and the arm that gets welded on, but have lost the bag of bolts it came with. $180 plus shipping on the site, but I'll take $150 as is. You will save about a good bit, but will have to supply your own bolts. This thing is seriously beefy! If you bring a sixer of non-IPA barley pop, I can help install and weld it up too.
Jason
I bought this from BIO about 2 years ago and never installed it. I have since gone a different direction and need it gone.
Skid Plates For 80 Series Toyota Land Cruiser
Skid Plates For 80 Series Toyota Land Cruiser - Bump It Off Road - Windsor Colorado.
www.bumpitoffroad.com
I have the plate and the arm that gets welded on, but have lost the bag of bolts it came with. $180 plus shipping on the site, but I'll take $150 as is. You will save about a good bit, but will have to supply your own bolts. This thing is seriously beefy! If you bring a sixer of non-IPA barley pop, I can help install and weld it up too.
Jason
SOLD!!!
Raslarr 4" Stainless Steel Snorkel
I hand carried this back from Australia in February 2020, and have never installed it. I planned it to go on my LS swapped 80, then my latest build, but think I will keep the quarter panel unmolested instead. I need this gone and would like to see it installed on someone's rig and put to use. A quick note, this is the last 80 Series Snorkel Raslarr ever produced. They have since gone full in on Nissan Patrol stuff and stopped making snorkels altogether.
www.raslarr.com.au
I paid $636.36 AUD for this thing, which in todays money is ~$440 USD. $400 flat takes it home and you save the ~$150 in international shipping. It will use the same template as an ARB/Safari which I have and can make a copy of if needed. If you already have a Safari installed, it will just be enlarging the hole according to the Raslarr template and some new holes/rivnuts in your A-pillar.
***I just remembered you will need to order a silicon adapter to go from 4” to 3” if you mating it to the stock air-box. i can help find one too. Or we can roll a 4 inch tube and weld it into the airbox. I also happen to have a spare factory air box I could modify….i have too much stuff.
IM me here or text me at 501-772-6109
Jason
Raslarr 4" Stainless Steel Snorkel
I hand carried this back from Australia in February 2020, and have never installed it. I planned it to go on my LS swapped 80, then my latest build, but think I will keep the quarter panel unmolested instead. I need this gone and would like to see it installed on someone's rig and put to use. A quick note, this is the last 80 Series Snorkel Raslarr ever produced. They have since gone full in on Nissan Patrol stuff and stopped making snorkels altogether.
Bull Bars, Rear Bars, Rock Sliders, Bash Plates | Raslarr Engineering
We specialise in making Bull Bars, Rear Bars, Rock Sliders and Bash Plates for Toyota Hilux & Landcruiser, Nissan Patrol, Ford Ranger & Raptor, and Suzuki Jimny. We are 💯% Australian Owned and Made.
www.raslarr.com.au
I paid $636.36 AUD for this thing, which in todays money is ~$440 USD. $400 flat takes it home and you save the ~$150 in international shipping. It will use the same template as an ARB/Safari which I have and can make a copy of if needed. If you already have a Safari installed, it will just be enlarging the hole according to the Raslarr template and some new holes/rivnuts in your A-pillar.
***I just remembered you will need to order a silicon adapter to go from 4” to 3” if you mating it to the stock air-box. i can help find one too. Or we can roll a 4 inch tube and weld it into the airbox. I also happen to have a spare factory air box I could modify….i have too much stuff.
IM me here or text me at 501-772-6109
Jason
Last edited:
NIB O2 sensors:
$90 ea, CSC special $240 for all.
(69115 sale pending)
Located in Flagstaff
$90 ea, CSC special $240 for all.
(69115 sale pending)
Located in Flagstaff
Last edited:
89465-80011 is a rear for 1998-2003 100 Series V8.
Good catch, edited to reflect correction.
Anyone interested in a package deal? $100 for both! $120 if you want the metric drill bit.
80 Series Eimkeith Panhard Correction Kit:
These weld on, use factory panhard rod, and retain factory mounting points. Provides correction for 2", 3". 4", 5" lifts. These are the V shaped forward edge (if you need help determining, I can help). Will fit any year 80 series as long as the drivers side, panhard mount, forward edge is V shaped.
80 Series DIY Front Axle Relocation Kit:
redlinelandcruisers.com
These fit all 80 series land cruisers and will move your front axle forward 33.3mm to help clear 37" tires (or any rubbing on the pinch weld). They weld on, instructions on the website. Comes with one drill jig and 4 plates to weld on. I have brand new 18mm metric drillbit that I will include for another $20 if you ask nicely
80 Series Eimkeith Panhard Correction Kit:
Search: 7 results found for "PCK"
Good stuff for your Toyota. The original PCK® (Panhard Correction Kit) for 3rd, 4th, and 5th Gen 4Runners.
eimkeith.com
These weld on, use factory panhard rod, and retain factory mounting points. Provides correction for 2", 3". 4", 5" lifts. These are the V shaped forward edge (if you need help determining, I can help). Will fit any year 80 series as long as the drivers side, panhard mount, forward edge is V shaped.
80 Series DIY Front Axle Relocation Kit:
80 Series DIY Front Axle Relocation Kit FJ80 FZJ80 Land Cruiser
80 Series DIY Front Axle Relocation Kit to better aid in tire clearance while attempting to maintain a lower Center of Gravity (CG) on your 80-Series Land Cruiser.
redlinelandcruisers.com
These fit all 80 series land cruisers and will move your front axle forward 33.3mm to help clear 37" tires (or any rubbing on the pinch weld). They weld on, instructions on the website. Comes with one drill jig and 4 plates to weld on. I have brand new 18mm metric drillbit that I will include for another $20 if you ask nicely
JunkCrzr89
Competent Ignoramoose
Yes pleaseAnyone interested in a package deal? $100 for both! $120 if you want the metric drill bit.
80 Series Eimkeith Panhard Correction Kit:
Search: 7 results found for "PCK"
Good stuff for your Toyota. The original PCK® (Panhard Correction Kit) for 3rd, 4th, and 5th Gen 4Runners.eimkeith.com
These weld on, use factory panhard rod, and retain factory mounting points. Provides correction for 2", 3". 4", 5" lifts. These are the V shaped forward edge (if you need help determining, I can help). Will fit any year 80 series as long as the drivers side, panhard mount, forward edge is V shaped.
View attachment 3217584
80 Series DIY Front Axle Relocation Kit:
80 Series DIY Front Axle Relocation Kit FJ80 FZJ80 Land Cruiser
80 Series DIY Front Axle Relocation Kit to better aid in tire clearance while attempting to maintain a lower Center of Gravity (CG) on your 80-Series Land Cruiser.
These fit all 80 series land cruisers and will move your front axle forward 33.3mm to help clear 37" tires (or any rubbing on the pinch weld). They weld on, instructions on the website. Comes with one drill jig and 4 plates to weld on. I have brand new 18mm metric drillbit that I will include for another $20 if you ask nicely
View attachment 3217585
View attachment 3217587
They are all yours
