Arizona Classifieds / For Sale / Wanted

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

peacesells63 said:
105 sector shaft upgrade kit for 80 series steering box - includes sector shaft, pittman arm (LHD or RHD), steering box rebuild kit, sector shaft nut and lock washer. Located in flagstaff, can deliver to phx.
Click to expand...

For anyone who missed out, I have 2 more of these all OEM toyota 105 sector shaft upgrade and steering box rebuild kits. $575 each, and I will be in PHX on April 11-12.

I also have a pair of new FJ80 spindles (the ones with the roller bearing instead of a brass bushing). $450 for those, same part in the link below.

4340160081 - Toyota Spindle sub-assembly, steering knuckle. Heel | Serra Toyota, Decatur AL

Genuine Toyota Part # 4340160081 (43401-60081, 4340160040, 4340160041, 4340160080) - Spindle sub-assembly, steering knuckle. Heel. Fits Land Cruiser, LX 450. Ships from Serra Toyota, Decatur AL
parts.toyotaofdecatur.com
 
I have a used Rogue River 14 canoe I just picked a couple weeks ago. I took it out fishing at Alamo Lake last weekend and it did awesome. It's just a bit bigger than I need since I mainly fish alone. This would be a great stable family canoe. I paid $350 for it and would like to get that out of it. Open to a trade for a smaller canoe, or other camping/hunting stuff.

canoe.webp


fRogue_River_14_Canoe_With_2_Paddles__350_5a6a327e87a03.webp
 
Last edited:
Have a Coastal Off-road high clearance bumper kit for a 1st gen Taco for sale. My brother in law purchased it to put on his Tacoma but didn't know he had to cut the bed to get it on and doesn't want to do that.

Looking to get $1,800 - has the dual swingouts with a tire carrier & dual jerry cans.

Kit is located in Tucson. Buy this kit from him and save yourself $100 plus the lead time to get it out here!

Looks like the bumper below when assembled

20201129_205026.jpg
 
jahawk said:
Old Town canoe. I'm guessing it's a 119 Scout. I was going to fix it up, but found another canoe a bit bigger. It's old a bit hogged out but floats, and paddled nice around my pool. $50

Jim
Click to expand...

Good Evening,
PM sent

Thank you
 
Raslarr 4" Stainless Steel Snorkel

I ordered this from Raslarr in Victoria, and picked it up when I was there in 2020. I got it for my LS swapped 80, but never installed it. Then I thought I would save it for my diesel swap project, but alas, I have changed my fickle mind yet again. I am honestly working to reduce the amount of crap I have in my house and this thing needs to go if I am not going to use it. So, here goes. I paid $700 AUD for this in 2020 when the exchange rate was .68 USD per AUD. That converts to me having $476 USD in this thing, and to boot, I hand carried it all the way from Victoria, Australia. Current exchange rate is .74 USD per AUD, which means that same 700 AUD would cost ~515 USD. All that said, it does me no good sitting in my closet, so I need to get rid of it. $400 takes it home. I have the snorkel, two decals, trim, hardware, and the template. Another interesting tidbit is that in the time between when I ordered it and went to Oz, Raslarr got out of the snorkel business to focus on bars and sliders, so this was the last snorkel they ever made. Enough of me rambling. Spread the word, or come get it for yourself!!! I'm just gunna blow the money on more Cruiser parts.

***Also, this lines up with the same hole center as a Safari Snorkel, so if you have one on your rig already, you can open up the 3" hole to 4" and install.

IMG_6691.jpg


IMG_6693.jpg


IMG_6694.JPG


IMG_6692.jpg
 
Last edited:
ARJMN said:
Raslarr 4" Stainless Steel Snorkel

I ordered this from Raslarr in Victoria, and picked it up when I was there in 2020. I got it for my LS swapped 80, but never installed it. Then I thought I would save it for my diesel swap project, but alas, I have changed my fickle mind yet again. I am honestly working to reduce the amount of crap I have in my house and this thing needs to go if I am not going to use it. So, here goes. I paid $700 AUD for this in 2020 when the exchange rate was .68 USD per AUD. That converts to me having $476 USD in this thing, and to boot, I hand carried it all the way from Victoria, Australia. Current exchange rate is .74 USD per AUD, which means that same 700 AUD would cost ~515 USD. All that said, it does me no good sitting in my closet, so I need to get rid of it. $400 takes it home. I have the snorkel, two decals, trim, hardware, and the template. Another interesting tidbit is that in the time between when I ordered it and went to Oz, Raslarr got out of the snorkel business to focus on bars and sliders, so this was the last snorkel they ever made. Enough of me rambling. Spread the word, or come get it for yourself!!! I'm just gunna blow the money on more Cruiser parts.

View attachment 2986036

View attachment 2986037

View attachment 2986038

View attachment 2986039
Click to expand...

Wish I had an extra $400 I love this look.
 
Honger said:
Were these good takeoff parts from a bad motor? Or are they of unknown condition?
Click to expand...
Hello,
yes, those were takeoff parts from a bad piston ring engine. They are usable condition and they needed to be cleaned.
Thanks
 
You must log in or register to reply here.

Share this page

Back
Top Bottom