Additional cooling capacity

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

musthave

All maps, one app!
Supporting Vendor
SILVER Star
Joined
Sep 4, 2013
Threads
729
Messages
5,910
Location
Florida / Colorado
Riding through the midwest and overall temps are higher than East coast. Or so I’ve noticed. On this cruiser I’m going to pick up a blue fan clutch from @NLXTACY on Sunday or Monday while out that way. But I also got to thinking about cooling capacity.

Has anyone made or tried adding an additional air cooled radiator of sorts between the frame rails behind the ARB or other bumper? I would think that you could utilize that space rather easily and it would increase capacity and should lower temperatures. I’m no physicist but it seems to make sense.

Any thoughts?
 
Maybe removing the wood from in front of the radiator opening would be more important.

621220C9-2B5E-4CFD-8A93-9A6DEA2CEEDE.webp
 
Stock replacement type radiators like TYC, KOYO is more than adequate when paired with functional water pump, thermostat, fan clutch, etc. Look at the cooling as a system whole, all parts contribute to efficient cooling. With that said...
I spent a great amount of time/research in my cooling system, especially for the types of terrain/off-roading we do out West.
Beefing up the fan clutch with thicker clutch fluid - 15-25k range will help tremendously if you are experiencing temp creep in traffic and slow wheeling (4L) when air circulation is a concern.
If you engine runs hot on highway 205-210 F plus range, i would look into the radiator as a culprit.
Make sure the radiator is ducted properly around the top and sides as well as your fan shroud, most often the foams were gone exposing large gaps.
I run a all alum larger capacity radiator with 25k clutch fluid mod in my fan clutch w/ 30/70 coolant/water ratio with water wetter and see excellent results for Socal type wheeling.
185 F on highway w/ AC <193 F with load
200 - 205 F on 4L steep climbs

best of luck.
 
Maybe removing the wood from in front of the radiator opening would be more important.

View attachment 2008462
Yea... I actually removed them today. Slight difference but not much.

Radiator is new’ish OEM18K miles, The foam is still present.

I think the blue fan clutch will take care of things just fine, especially after looking at some other threads with people running Cruisers with much higher temps. I guess I’m just used to seeing 186.5 all the time.
 
If I were going to do it what I would probably do is get an oil filter adapter, use an oil thermostat and run that to an oil cooler with a switched fan.
That is actually an excellent idea. I like it. I wonder if anyone has tried it yet. I tried searching but couldn’t come up with anything. Surely I’m not the first to think of something similar.
 
You didn't think of it, I did. ;) And I have thought of it many times but up to this point I have had zero need for any additional cooling. You just need to ensure your OEM cooling system is operating as designed and I don't see any need for anything more for stock power levels.

That is actually an excellent idea. I like it. I wonder if anyone has tried it yet. I tried searching but couldn’t come up with anything. Surely I’m not the first to think of something similar.
 
You didn't think of it, I did. ;) And I have thought of it many times but up to this point I have had zero need for any additional cooling. You just need to ensure your OEM cooling system is operating as designed and I don't see any need for anything more for stock power levels.
You did in deed! I was only thinking of water.

The OEM cooling system is operating as designed. Everything on this cruiser from head gasket up as less than 20,000 miles on it. Driving from Florida to Texas two years ago it maintained 194. Driving through canyonlands very slow along the white rim Road my temperature time does highest 207. To me that’s high, but I am not used to the high temperatures overall out west here.

Living in St. Petersburg Florida my East Coast temperature is almost always 186.5 with OEM and blue fan clutch. If I sit at a red light for long enough in the end of August I will sometimes see 190. Never higher.
 
You did in deed! I was only thinking of water.

The OEM cooling system is operating as designed. Everything on this cruiser from head gasket up as less than 20,000 miles on it. Driving from Florida to Texas two years ago it maintained 194. Driving through canyonlands very slow along the white rim Road my temperature time does highest 207. To me that’s high, but I am not used to the high temperatures overall out west here.

Living in St. Petersburg Florida my East Coast temperature is almost always 186.5 with OEM and blue fan clutch. If I sit at a red light for long enough in the end of August I will sometimes see 190. Never higher.
I am from FL too, ft myers and Gainesville.. but FL is flat....
 
Im going to start to play with hood vents. Added a few temp gauges to measure affects.

I have a under hood pickup 10” from my turbo. And a radiator return temp sensor.

When it’s above 90f, with a/c on running above 75mph my temps start to rise. Have a 185stat. I’ll run a steady 205-210 at 80-85mph in the heat with the ac on. Never an over heat situation just hot. I’m pushing lots of boost and egts with this aerodynamic brick with roof rack. Under hood is 150-170 and radiator return is 180 under that situation. Going to start by hood lift to inhibit air flow. We’ll see what happens. .5” then 1”. I’ve been waiting for it to get hot to get good inputs.

For reference same day slow to 70-75mph. Temps at 185-190, temps under hood 140, and return 150.
 
Disclaimer, not a 1FZFE cruiser. ;)

Im going to start to play with hood vents. Added a few temp gauges to measure affects.

I have a under hood pickup 10” from my turbo. And a radiator return temp sensor.

When it’s above 90f, with a/c on running above 75mph my temps start to rise. Have a 185stat. I’ll run a steady 205-210 at 80-85mph in the heat with the ac on. Never an over heat situation just hot. I’m pushing lots of boost and egts with this aerodynamic brick with roof rack. Under hood is 150-170 and radiator return is 180 under that situation. Going to start by hood lift to inhibit air flow. We’ll see what happens. .5” then 1”. I’ve been waiting for it to get hot to get good inputs.

For reference same day slow to 70-75mph. Temps at 185-190, temps under hood 140, and return 150.
 
I've been contemplating this too. With temps reaching the 100's again I run into issues with cooling. It's fine around town and for the light wheeling I do but when I am on the highway and start climbing hills the gage will get up to about 3/4. Doesn't go higher and cools back down quick once it flattens out. It's annoying more than anything because the AC kicks off and takes a while to come back.

I've cleaned and flushed the system, cleaned the condenser and radiator fins. Gonna try the blue clutch fan next. If that's not enough will be looking at a new radiator and water pump. I like the oil cooler idea, may have to explore that more.
 
That is actually an excellent idea. I like it. I wonder if anyone has tried it yet. I tried searching but couldn’t come up with anything. Surely I’m not the first to think of something similar.


I think sometimes more is less just don't do it. You add more week points for failure.

I think my rig works in the hottest place in the world. And I do extreme rock crawling and desert trips for 4L drive I added SPAL electrical fan on top of the Toyota one and hood openings with blue FC mode is more than enoughץ

WhatsApp Image 2018-05-02 at 15.32.32.webp
WhatsApp Image 2018-03-03 at 21.19.57.webp
 
I've been contemplating this too. With temps reaching the 100's again I run into issues with cooling. It's fine around town and for the light wheeling I do but when I am on the highway and start climbing hills the gage will get up to about 3/4. Doesn't go higher and cools back down quick once it flattens out. It's annoying more than anything because the AC kicks off and takes a while to come back.

I've cleaned and flushed the system, cleaned the condenser and radiator fins. Gonna try the blue clutch fan next. If that's not enough will be looking at a new radiator and water pump. I like the oil cooler idea, may have to explore that more.

@Pascoscout My OEM temp gage doesn't move even when my two alarms kick in at 218 F and disturb my karaoke singing with Dolly Parton and Joe Denver :eek:

The AC drops dead at 226F
 
I've been contemplating this too. With temps reaching the 100's again I run into issues with cooling. It's fine around town and for the light wheeling I do but when I am on the highway and start climbing hills the gage will get up to about 3/4. Doesn't go higher and cools back down quick once it flattens out. It's annoying more than anything because the AC kicks off and takes a while to come back.

I've cleaned and flushed the system, cleaned the condenser and radiator fins. Gonna try the blue clutch fan next. If that's not enough will be looking at a new radiator and water pump. I like the oil cooler idea, may have to explore that more.
If your stock gauge is at 3/4 to red....you are at the verge of overheating. My stock gauge sits in the middle from 160 F - 230F according to my Koso aftermarket gauge. I would recommend upgrade the stock fan clutch fluid to 20-25k and go from there. If you are still overheating during highway/ hill climbs, perhaps then look at a new alum. radiator. I wouldn't let your motor get that hot again given it is a 1fz-fe....
 
Yea... I actually removed them today. Slight difference but not much.

Radiator is new’ish OEM18K miles, The foam is still present.

I think the blue fan clutch will take care of things just fine, especially after looking at some other threads with people running Cruisers with much higher temps. I guess I’m just used to seeing 186.5 all the time.
If everything else is working well, the new fan clutch will definitely help. I rarely see anything over about 205* now, and this is hill-climbing in 100+ temps and occasional rock crawling. I have an auxiliary electric fan I'm going to install soon, but I really don't think I *NEED* it. But it will be nice to have.
 
Back
Top Bottom