Additional cooling capacity

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Riding through the midwest and overall temps are higher than East coast. Or so I’ve noticed. On this cruiser I’m going to pick up a blue fan clutch from @NLXTACY on Sunday or Monday while out that way. But I also got to thinking about cooling capacity.

Has anyone made or tried adding an additional air cooled radiator of sorts between the frame rails behind the ARB or other bumper? I would think that you could utilize that space rather easily and it would increase capacity and should lower temperatures. I’m no physicist but it seems to make sense.

Any thoughts?
Check out his Ron Davis rad while you’re at it. “Must have.” Can’t beat the WE/RD combo. Maybe add an electric fan if you’re touring Death Valley. You can also replace paperclip with finned cooler on frame. Again, see @NLXTACY rig...
 
I have a Setrab auxiliary oil cooler & fan combo, controlled by a temp sensor in my off-road car.
It works really well. It’s pretty small, they make larger ones, but should easily fit behind an ARB bumper.
View attachment 2009192View attachment 2009193View attachment 2009194


You do not need it Toyota installed very efficient oil cooler already

Photo 8.12.2017, 13 10 18.webp
 
I’m just gonna say it: Putting something that can stop your vehicle or destroy your engine if damaged—inside/right behind one of the spots most likely to get damaged—is maybe not the best idea...
 
I’m just gonna say it: Putting something that can stop your vehicle or destroy your engine if damaged—inside/right behind one of the spots most likely to get damaged—is maybe not the best idea...

If you wreck an ARB bumper enough to destroy an oil cooler, there is a good change your radiator would be toast too.
 
Back
Top Bottom