2F Turbo Size

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Jan 6, 2012
Threads
342
Messages
11,017
Anyone know much about turbos? I am considering putting a turbo on my 2F but I have always had difficulty interpreting turbo sizing. I just want to put on a fairly common sized turbo that will give boost at around 1500rpm. I saw on ebay their are companies that sell rebuilt turbos for heavy equipment machines for a couple hundred bucks. Could I use something like that? I think a turbo 2F would be cool. I was thinking like a t3/t4 or something but then their are aspect ratios too which confuses me.
 
I was told by one of the LC experts your asking for trouble putting a turbo on a F engine because of the few number of main bearings on the crank. The reason the 1ZF is better suited to a turbo.:meh:
Im not intending to run a ton of boost. I do believe that with the timing fairly retarded it would be able to handle enough boost to get close to stock v8 power numbers.
 
I guess that would depend on what V8. I had a friend with 86 chevy SWB 4X4 with a 305 or 307 which ever was offered. While my F145 in my 68 didn't like it I had more hill climbing power on the freeway with a header and 350 Holley carb. This was back in 86 when the chevy truck was brand new. I have long since removed the header/Holley carb and switched to a stock exhaust/stock one barrel carb. For todays modern roads and traffic I have a couple of V8 powered Toyota SUVs not only designed for the road today but also the safety features not even on the drawing board when the 40 were made. I'm lucky that my 40s see very little pavement.
 
PM Mace, he has been running a turbo on his 2F for a while. I believe there are some old threads (here or Pirate) with info on his setup as well.
 
Or do a draw through.. There are plenty of turbo carb motors.. VW bugs are the first to come to mind..
 
This one has had a turbo for about 15 years or so.. Still runs great..

39932499_10214527080164783_3059377235837321216_n.jpg
 
@Mace , do you have any threads pertaining primarily to your turboed 2F?
I think I recall yours being one of the very few running and operating turbo 2F’s stateside, from way back when. Thought I recalled there being an Australian setup (factory?) that ran the air charge mixed with fuel prior to the manifold somehow (been too long since I read about it).
Is your block a 70’s 2F with the domed pistons or 80’s with flat-tops and closed combustion chambers?
 
I got it from Australia in the early 2000s. I'm pretty sure it was an aftermarket setup. The design is a draw through setup. No intercooler. I believe that the fj40ish rig of the week thread goes over it.

I think the block is flat top pistons with closed heads. But I have never verified that.
 
Last edited:
Back
Top Bottom