17 digit vin code on frame????

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Sep 9, 2008
Threads
22
Messages
155
Location
Lemoore CA
I know vin numbers are supposed to be 17 digits but Toyota never put the full vin numbers on Fj40 frames. They used 10 digits. Also 17 digit vin numbers were not required by law till 1981 so fj 40 only have 10 digits on thier frame. My local Toyota dealer forwarded this chart from Marlin Crawler to me I thouhgt it might be helpfull to some. I have been dealing with Toyota America and they seem to think that all Fj40 have a 17 digit code on the frame. I was hoping that people would post pics of thier frame numbers along with thier manufacture date so that I can show them that there is no 17 digit vin on the frame. I believe Fj45 and Fj55 will have the same 10 digit code on the frame. They did use the 10 digit frame number in the 17 digit vin and thats how you can tell if the frame and body are unchanged. Any pics/posts would be helpfull. Thanks
VIN_INFO[1].webp
VIN_LOCATION[1].webp
 
Its evident you need to start dealing with someone other than Toyota America :doh:
 
No Joke they tried to tell me that I had a toyota celica 2wd 4cylinder hard top when I called them about the vin the first time. This was Toyota America the corperation not american toyota the dealership.
 
My '78 FJ40 has a 10 digit VIN number - period. The frame, vin tag on the body and door and my Title are all the same, a 10 digit VIN number. Arizona has no problem with this.
 
No Joke they tried to tell me that I had a toyota celica 2wd 4cylinder hard top when I called them about the vin the first time.

It's hard to find good help these days........:meh:
 
I hope your 78 only has 10 digits they did not implement the 17 digit code till 1981. If you own a car later than 1981 I bet it has 17 digits Arizona or not. It's a nation wide thing.
 
Last edited:
Try using EPC program to look up genuine Toyota parts for your 78 using 10 digit vin it won't work.

I've owned this 40 for 24/25 years and both dealerships in Tucson have had no issues obtaining any part I've needed, including the parts that were only available from Japan.
 
They look at microfilm but try to get them to use the vin it won't come up. Not enough digits if you call Toyota america they won't have record of you're rig either and they claim to have complete records of all rigs imported and sold in U.S.. If a none dealer tried to use the EPC your rig wouldn't come up either. your rig is modified enough you probably work on your own rig and there are a lot of rigs out there that are far from original (v8,trans,axles,brakes,power steering). I know it won't help you mutch but there is a glitch in the system and toyota doesn't seem to know it. But it might be helpfull if it was fixed because not everbody has your knowledge, experiance, or anybody at a local dealership that is very knowledgeable about cruiser. Most people don't even know about what year vin #s became standard 17 digit. They just know what they have seen.
 
I have often wondered about this as my 73 has the 10 digit Vin. I was curious one day and tried to look it up on carfax to see if I could get a report and it was a no go without the 17 digit vin. South Caolina had no problem registering and re-doing the title in my name. Highway Dept. and Tax Office just went by the old title and didn't question anything. I have often wondered If I was missing something or if there was a way to get a 17 digit vin from Toyota for the year and month of the year that my 40 was made. I guess that it really doesn't make any difference since I usually look up the parts that I need from the CD that I have that was made from the old parts microfish. Usually just take laptop with cd loaded and show to cross reference with any new superceded part numbers. I usually seem to work just fine. Every once and a while I run into number problems. With the parts diagram from the CD it is usually only takes a little comparason and research to resolve it. Good info here. Aolt that I didn't know.:cheers:
 
Glad to be of help. Ive hard a hard time dealing with toyota over replacing vin plates that were removed from an 83 fj40. They keep asking for 17 digit code off of frame but it does not have one. Although the 10 digit code is contained in the 17 digit vin on rigs after 1981. The only good thing is the dash, spring mounting, ebrake, are all unique to 83-84 so I know I have the right year body and frame.
 
On a somewhat related note, I am about to pick up a '76 FJ40 in 2 weeks out of state and want to make sure that all the numbers match before I bring it to Colorado.

Where all is the VIN located? Front PS frame by the front bumper, tag by the DS door, and where else should I look?
 
My FJ40 has a 9-digit VIN.
 
Where all is the VIN located? Front PS frame by the front bumper, tag by the DS door, and where else should I look?

My 1969 also had a tag on one of the inside front fenders.
 
I am not sure of all locations but passenger side frame, drivers door jam A pillar, and I have seen them on window frames. Also I don't belive the engine block numer by distributor contains the vin like body and frame. But I could be wrong cruiser dan is knowledgable about vin locations.
 
1963. the 3 before the F is what year it is, they stopped this in 1965

the data plate I think will also have the engine # stamped on it, I know my 64 date plate engine # matches the engine in it.

Another 40 made its way into the family!! A pretty straight and original early guy.

The VIN is lower than the chart above goes and I haven't had any luck finding a month & year of production anywhere else.

VIN: 3FJ40-20067

Motor: F-185876

Help?

Thanks!
 
Back
Top Bottom