transfer case

I got a 3FE head I bought but decided not to use, it looks like it was damaged but was fixed, it was run with the damage for 5000 miles. I also got the 3FE intake Also if you're interested have a cam and crank from the 3FE, timing cover, pistons, rods, etc. Willing to ship as long as buyer pays

Hey Everyone. I’ve got a brand new OEM H55 F/H input and splitcase that were for a build that never came to fruition. It’s a drop in ready unit fully assembled with shifter and shift knob. I think nowadays this set-up runs about $6k. I’m asking $5k plus shipping. If you have any questions...

Pulled this powertrain out of my personal FJ80 to do an LS swap. I have the full engine, emissions equipment, air box and meter, ECU, and all accessories. Price includes the A440 trans with ECU and tcase however I will need parts of the harness to facilitate the LS installation. The engine...

Bought with a transmission, said to have 137k miles. located in Delaware Ohio. tested center diff lock actuator works good. viscous coupling feels good when turning rear/front outputs. does not include chain. $350, can ship but may take a week or more before i can get it boxed up and sent.

Does anybody have pictures of what they did so the shifter isn't up against the passenger seat?

Hello Everyone, I purchased my LC76 3 months earliar. Since then, I have been hearing this rattling noise which comes from knob of the 4wd transfer case. When ever it happens if I touch the knob, it goes away. Its very annoying. Anyone faced anything similar and a solution for this rattle?

The solenoid on my 77 series pzj finally pooped itself and so searching around for a replacement it appears that the OEM one has been discontinued (85440-60160). Is there a decent aftermarket option for this part and/or what other solenoids can I run from other vehicles as a replacement?

Is there any way to know whether I have a 62 mm (90311-48010) or a 65 mm (90311-48023) oil seal, without having to do a physical inspection or take the rear drive shaft off? My truck is a 1992 HZJ73, manufactured in March 1992, and it's an automatic.

With a very long list of things to do on my project this is something I have not got around to dealing with yet but I have some questions. First my set up: 1973 FJ with a 350 Chevy with a SM420 truck transmission, first gear being compound low. The transfer case is two speed, 2H and 4H, there...

Are some better than others? Any advice on what rebuild kits are the best? Thanks!

I've got a 1991 FJ80 that needs a transfer case. I am starting to think The Amish Electrician keeps the HF2A transfer cases with the hen's teeth. I'm wondering if there is anything I need to know about fitment. Is there any difference in the transfer case depending upon engine? This one...

Came out of a 1998 Lexus LX470 with 411,000 miles on it (at time of removal). The case had been filled with ATF and the gears are so worn out that they vibrate above speeds of 45 mph. Good candidate for a regear or rebuild. Plenty of good spare parts Asking $200 willing to negotiate

25.00 plus shipping.

Misc FJ80 parts from 1994 FJ80 and 1996 LX450. Including nearly rust free body for the LX

Toyota dealer can’t get the studs in for over a week (part 9011411003). Searching rock auto and the oreillys website yields zero results, but does anyone happen to know a Dorman or other aftermarket part number for the output flange studs? Thanks!

Have a transmission and transfer case from a 96 80 series with 167K on the clock. Everything worked as it should prior to removal. I still haven't separated them so let's say $350 for the entire unit and that includes the torque converter and the transfer case shifter. Transmission or transfer...

Hi everyone! I have a 99' land cruiser, and live at the bottom of one of the steepest roads in america. The other day, I was driving up the hill when the transfer case failed (sudden grinding sound, can't put in gear in either high or low). I managed to back it down the hill to a safe flat...

Bought this idler shaft from AA and never ended up using it. Box was only opened for pictures. Located in Castaic Ca. Part number and description in the pictures. 125 shipped to lower 48.

I pulled my TC out, due to the front loosing tension and causing clunk and jerk. Actuator and other sensor are sill good. Mileage is around 182k. Prefer local pick up or I can meet at resonable distance.

Team, I am in process of rebuilding my 5/77 2F transfer case rear output seal and e-brake components. I do not have a FSM handy, was hoping you can help here (see pic). Also, here are the callouts: 1. Rear u joint bolts (4) torque spec 2. Output shaft stake nut (1) torque spec 3. Front u...