suspension

Well, it didn't take me long to bend some IFS parts on my '93 4Runner. That massive tree root came out of no where I swear! At first I figured I tweaked my steering really good, but upon further inspection the top of my passenger side tire is now about 1/2" closer to the body then the driver...

My rear shocks are done for. I am not 100% sure what kind/size of lift I have. Can someone help me out with this project? Bought the truck in 2014 and it was already lifted. I do not trust that the last owner had the right shock size and simply just pulling the old ones off and replacing with...

CUSTOMER INSTALL - FJ 40 We import Terrain Tamer suspensions based upon demand. Reports have been good, including 40, 60, 70 and 80 Series. Kits are ordered from Australia based upon individual demand and ship by sea, so patience is a good thing :) The first customer sale was almost a year ago...

Chaps, any of you used aftermarket bushings for the front control arms for the tlc100/lx470? OEM buhsings cost pretty much now in Russia, so i'm thinking about aftermarket...anyone got expereience which should i try and which should avoid?

HOW DO I REMOVE? Every thing else has come apart farely easy. Do I just need more mass X velocity? The picture is the front passenger spring

I was about to buy a set of Bilstein 5100 for 2.5" lifted Landcruiser 105 (an 80 chassis with a 100 body basically). Then I stumbled upon Boss Shock Absorbers, but I have never heard of them before. They are 12 position adjustable and available in all combinations of lengths with...

Hi , I have a 2005 LX470 with about 79k on the clock. It's only had the basics done to it since 2012, so its not in the best shape. Today I noticed that the suspension fluid level was a decent amount below the minimum line. I read the manual and follow the steps to lower than raise the truck in...

DIY bump stop spacers. Cost: $15 Time: 1hr Difficulty: Easy Required Tools: 3/8 drill bit, punch, hammer, safely glasses, 12mm socket, drill press or drill, WD40. BEFORE: AFTER: After looking around for bump stop spacer and seeing most are selling at $40-$50+ I decided to make my own...

Hey greeting's IH8MUD, just joined up and have a few question's as i'm about to purchase an 80 series Land Cruiser. Details can be found here dbw408: TOYOTA LANDCRUISER 1993 | CarJam, note the picture is not the actual vehicle. As for my questions i was curious about the factory wheel size, as...

So I have searched the heck out of the old threads and havent found an exact answer to my problem. My rear left shock has disconnected form my 1981 BJ60. I went and got the listed bolt etc and it does not fit. It seems that the pipe or pin must be broken because I can't see a way to attack...

Hey guys, Hope we all had a Merry Christmas and a great New Year! New to the site but it seemed like the most logical solution to my toyota problems... I short into have a 3 82 toyota fj40s that I am restoring at the moment but I will post more on that later... I have another problem that ails...

Upgraded springs to OME. Were not sagging at the time of change. No longer have a use for them. Local sale only.

Upgraded springs to OME. Were not sagging at the time of change. No longer have a use for them. Local sale only.

Wanted: Steering box for RHD BJ70. Could also be from another model that would fit correctly. Only interested in ones that do not have any play or leaks.

My wife has been driving a stock 2002 LC, but it's time for me to take it over and start making some off road modifications. It needs some new suspension so I'm trying to decide on 1.5" or 2.5" susp kit. Any suggestions?

I am replacing the 4 OME Nitrocharger Sport Shocks on my 2005 100 Series Landcruiser with RadFlo's. There were new installed June of 2013. Total of 15K miles on them, all street use, no towing or heavy loads. These are 100 each new plus shipping. Looking for 225 for the set of 4 shipped to...

I searched the forums and didn't see anyone with this issue on an 80 series. The shocks (Bilstein) and springs (OME) are brand new, but I never noticed any lean with OEM shocks/springs. Any ideas what the issue could be or how I could correct it?

Hello ladies and gentlemen, I am new to MUD so go easy on me. I have always wanted a 100 series and I have finally bought one and intend on turning it into a wheeling SLEE machine. I am going to document the entire process good or bad I will upload my progress. I have searched the forums...

So my fiancé and I are about to move to Haiti and we have been given a 100 series cruiser. It's bone stock with 250k miles on it. I am wanting to do a lift on it but have heard about premature shock failed due to the way the uca's ball joints of OME doesn't have the correct angle and doesn't...

Instead of continuing to hijack @yohavos fantastic LX450 Ute thread to discuss shock upgrades I'm posting a new thread on a well-worn topic. This is not new but much of the info I've read is from a few years back so maybe there is new data / products / feedback from the community.. I've got a...