steering

I tried a search and after page 3 I gave up. I’m an owner of a 2021 HE and now a 2005 Lx470. The leather seats are pretty worn along with the steering wheel. Would love recommendations for steering and leather seat covers! Will enjoy slowing modding this lx470. Seats are wayyyyy more...

Hi all, I have a 1991 HDJ81 LandCruiser with the 12 valve 1HDT engine. When driving in a straight line the truck will need to be constantly steered in one direction or the other. For a while you will have to steer left as the truck is pulling right, then suddenly it will switch and you have...

BJ40 BJ42 FJ40 Steering Wheel in used condition. Wheel has scuff/scratch marks. Price 235$ shipped

Hello fellas, I’m working on a 97 LC and noticed a big play on the steering wheel. I believe that replacing the steering gear box will fix the problem, no time to take it apart and re-service it. That said, can someone confirm that the part n.44110-60212 will fit the 97 LC / LX450? Mr...

I’m stumped… what size is the nut for a 1966 steering column (Fj45lv but I’m sure all 1966 columns are the same)? I used calipers and thread pitch tools and thought maybe m13 1.5 Only had m12 1.5 at store. No odd sizes. Anyone have a nut they can get me or know where to get one? I have a horn...

Does anyone have another supplier that sells the entire conversion kit to swap in an FJ60 power steering unit to an FJ40? Ive tried to get the kit from IRON PIG but they are no longer selling things. Ive got the gear box, and just need all the other parts. Id like to go the FJ60 route due to...

Urgently looking for LH steering knuckle Part # 43202-60020 Used/new/junkyard Seattle, Wa If you know any junkyards with a 100 series please let me know- I would greatly appreciate it Thanks

2003 GX 470 The steering wheel is making a clicking noise... not all the time but enough to cause concern. Also, I could hear it powering a motor of some kind while I am driving. I recently upgraded the suspension to a Eibach Stage 2 front/rear. So, I pulled the fuses for suspension...

Hi All, I tried searching but couldn't find anything that addresses my issue. I have been having some pretty serious issues with my power steering. What started out as a small drip two days ago has spiraled into having serious foaming and overflowing out of the reservoir. I had a slow leak...

Hi all. Can't solve the problem with steering angle readings in VGRS and AHC. Earlier fixed VGRS intermediate shaft. Works good now and no any VGRS truble codes. Did VCS zero point calibration in accordance with Issues after new steering rack. Zero point/steering angle/VSC -...

Hey everyone, new to the forum, been looking to buy a 73 series for a while now and finally found a nice one I have the option to buy. Its a 1996 FZJ73 with the 4.5, 220,000 km. Its in great shape overall, no rust, looks to be well maintained. I had it inspected and the shop found just a few...

Hi everyone. I have an 83 bj40. I have most of the PS parts needed, but would like to find a PS column/shaft and a set of hard cooler lines too, if possible. It's fine if the cooler lines are in bad shape. ( I know, hard to find) Thanks LMK.

Hi. I have a 98 LC. For 5 years no mechanic has said anything about my control arms and now one is saying that mine are not ok (maybe unsafe) and look unusual and aftermarket. Recently I'm hearing noise in my steering when turning tighter in a parking lot etc. Do these look ok to you? Pics of...

Decided to replace the steering column in my 92 (had to replace upper bracket for ignition and thought replacing the whole shaft would be faster then messing with the tamper proof fasteners that retain the bracket) the donor column came from a 94. Problem is the spindle for the Upper shaft that...

Will a 68-74 OEM steering box work in a pre 68? I know there is a different steering box for those models, but wanted to see what it would take to make the swap, as I have a nice rebuilt box now.

Hey guys I have a 5th gen 4runner with Marlin crawler RCLT-HD kit so it has a LC200 rack. The rack been installed since july and I have over 4k miles on it but since day one I have always noticed this clunking/popping sound. It will clunk when I come to a stop and I apply the brakes abruptly...

FOR SALE Early steering wheel button restored $275usd shipped

2007 LC 265,000 miles replaced upper and lower control arms, wheel bearings, one axle in the last two years. Steering rack was replaced about 5 years ago. Slight sensor lift on 34" tires. Every so often and more recently when I turn the truck left (like making a left onto a side street) the...

I can’t find this info anywhere and I’m not afraid to ask dumb questions, so here it goes: are steering damper bushings the same as shock bushings? My Cruiser came with an ironman steering damper and the bushing is shot.

Hello All, Been trying to remove a Pulley from the PS pump shaft. Is there a certain method or trick to this? I have done a search on here because I remember seeing a thread about it a few years ago but I cannot find it. I have also looked at the FSM but I did not see anything specific to the...