steering

Ηey all. Fairly new to the thread and basically my first post aswell in the forums. Been active on the form looking at different builds and posts but never posted before. So please bare with me a little. Ok, so basically my Lc 200’s ( 2010 ) steerings wooden paint has faded due to use and...

Hey guys, I've searched the FAQ and every possible related thread, but all I got is "don't over torque or you will bend the bracket". Well, turns out the force is minimal because my brackets are bent around every bolt hole. At no point in tightening did they ever feel tight enough to where they...

Hey guys I apologize in advance if this has been covered but I searched quite a bit and can't really figure out what is going on. About a week ago I noticed on my drive home from work that my steering felt really stiff and that when I would move the steering wheel it would stay wherever I...

Just picked up a PS gear and pump from a fellow mud member, I want to rebuild them both and have as spares Im asuming 37 i mud grapplers and KO2s arent going to lenghthen the life of the units in the truck now, my question is wheres the best place or who is the best guy to get oem rebuild kits...

SoCal Good condition, no leaks, good seals, DOES NOT FIT 93-97 $125 including shipping within USA. Pulley is not available.

Helping a buddy list up his '86 FJ60 he started parting out locally but needs it gone. Despite being in Arizona now it's originally from New England and has an unusable frame. The body has some usable stuff, there's some decent interior parts, tailgate is nice, doors are pretty good, rocker...

So to start this all off, hello again forum. And into my issue, I just Pulled the chevota from the field and started the wiring rewire and engine tuning. Now she runs like a top. However the steering arm was bent bad enough that she wouldn't turn far to the left. I buy the new part, use the...

My steering wheel has a few degrees of motion where there is very little resistance and movement is not reciprocated in the movement of the wheels. Here's a video: This has always been an issue and installing new tie rod ends did not make an appreciable difference. However, it didn't really...

I recently purchased a 97 LX450 out of Utah. It looks like the previous owner did plenty of off-roading - including a bent rear drive shaft and some pretty significant cosmetic damage to the front and rear OEM bumpers. All obvious repair work has now been done with the exception of a clunking...

Bought my LX with small steering rack leak that mechanics assured me is very minor, and in 3 months I never had to top off the fluids, but did flush the oil 3 times (turkey baster method) because I always had issues with the steering not being smooth. I thought the oil was old. It feels like...

Man A Fre Power Steering Pump Bracket 1 by ReelBigFisch posted Jul 28, 2017 at 2:23 AM Man A Fre Power Steering Pump Bracket 2 by ReelBigFisch posted Jul 28, 2017 at 2:23 AM Man A Fre Power Steering Pump Bracket 3 by ReelBigFisch posted Jul 28, 2017 at 2:23 AM $50 OBO and plan for a few extra...

I just spent a couple evenings working on my 1994 Land Cruiser. The power steering cooler had some pretty bad corrosion/rust that lead to a leak in the "paper clip" cooler. To help the next guy I wanted to let you know what all needs to done to replace the cooler with an OEM part or like me, a...

Parts guy Shawn down where Cdan used to work, did a great job getting me hooked up with parts. One thing I always liked about Dan (and was willing to spend shipping on) was that I always got the right parts and I didn't have to know everything, unlike at my local dealer. The techie part: I had...

Has anyone else done this. I am in process, but cannot find a place to run steering stabilizer. I would appreciate advice from anyone else who HAS ACTUALLY DONE THIS. I do not wish to sacrifice the stabilizer. It doesn't seem feasible to run it to the tie rod either.

Greetings and salutations. I took the newly acquired FJ80 up an easy pass this weekend. Went up Medano Pass from the Great Sand Dunes Nat. Park side. Only hit hard once in a mud pit. Now my steering wheel is 90 degrees out. I checked the universal joint in the cabin, the sliding joint yoke and...

I'm currently on the hunt for a 05-06 100. Oddly for over a month of searching, I've only been able to drive one for the first time yesterday. Tested a stock 06 LX470 with Hankook tires (very street orientated tires) with 150k on the odo. Plenty of tread and didn't show odd wear. When I...

I am trying to replace my power steering gearbox. I'm guessing it's all original because the fluid lines WILL NOT come out of the top of the gearbox. Got a lot of recommendations to cut the lines, because really they need replacing anyway. Dove into that this weekend, and I realize the lines...

03 Land Cruiser Last week my power steering started making noise, so I popped the hood and the reservoir was low. Added ATF and it was fine. Today the same thing happened. I crawled underneath the truck, and there is ATF dripping through the driver side of the skid plate. I haven't pulled the...

JULY 14, 2017 I now have another one exact same quality and condition SoCal Very good condition. Complete, with horn center as pictured. $95 plus shipping. Also one extra horn center without steering wheel, $25 plus shipping. Very Good condition.

Box appears to be in good shape. Not removing the pitman arm. Asking $85 plus the ride