shop

i just picked up a 1989 62 series after years of wanting one. it has the typical rip in the drivers seat cushion and could use some new foam. Has anyone worked with a shop around KC and had good results? Thanks

looking for a good shop for a 2015 GX460, wine noise coming from the front end. shop here said it was a power steering pump, they replaced it with a Lexus pump, but they didn't clean the reservoir. so today I cleaned out the reservoir and R & R the fluid using a quart. Noise is still there...

The girlfriend’s GX460 has a wined coming from the front of the engine. The local shop said it was the power steering pump, replaced that and the belt, noise is still there. Guessing it could be a pulley, but the local shop says we got a bad pump, so I want someone else to look at it. What...

Hello all, I have a 2003 Lx 470 which has developed a really bad bounce going over bumps and uneven payment. If anyone else has suggestions on what might be wrong that would be great as well. I suspect it is bad globes so I purchased them to repair my self with the fluid. However, I tore my...

Hello, I am hoping someone in the Colorado, Denver/ Front Range area, may know of anyone taking on fabrication work? I have taken my FJ62 to CTS up in Conifer in the past, they are great, but they aren't doing fabrication work. I seem to be hitting this roadblock everywhere I try. I have...

Hello, I am hoping someone in the Colorado, Denver/ Front Range area, may know of anyone taking on fabrication work? I have taken my FJ62 to CTS up in Conifer in the past, they are great, but they aren't doing fabrication work. I seem to be hitting this roadblock everywhere I try. I have...

Hey guys, Any recommendations for good land cruiser mechanics/shops in North Florida? I've got a 1998 100 series that needs some work with a brand new in the box supercharger ready for install, as well as gears, suspension, bar work, etc. I don't think I can do the diffs myself or the...

Hi I need a shop to to wire up my rear metal tech bumper, relocate camera and instal fuse/relay bank for upcoming front bumper; winch and lockers. Im in Newark DE and willing to drive for a good shop areas (PA, NJ,MD) Thanks in advance Jorge

Hey everyone, new 100 owner here. Looking to start base-lining maintenance on my truck and looking for advice on a Cruiser friendly shop/mechanic in the South Coast MA area (willing to travel a bit more if it's worth it). I plan on doing as much as I can myself (within reason), but I'm no...

Can anyone recommend a good (preferably Toyota-specific) mechanic or auto shop in the Baltimore, MD area to look over my 80 series? It's a 20 year old truck, so I am trying to avoid paying dealership prices, hoping to find someone with reasonable labor rates for good work. My LX450 overheated...

I have some Toyota service tech uniforms for sale. Two size large, short sleeve One size XL, short sleeve Twelve long sleeve (all XL) $45 each shipped. Or do a package deal. You can see more pics here

Hi folks: I recently got the Ironman Pro Foam suspension kit and need a recommendation on a shop in Northern California that would install it. My local mechanic only does stock and didn't want to take this on especially with the diff drop kit. OR I am ready to install it myself with help (and...

After only 3 years (March 2014), my high and tight tucked exhaust is looking pretty ragged. There are several issues. The surface rust is so bad that I could probably poke a hole in the pipe. The cat is so close to the shield that it bangs when out on the trail. The passenger side floor gets...

I have recently purchased a 2000 LX and have always loved working on my cars. This will be a 3rd vehicle and help exercise my tinkering habit as well as family fun (snow, beach, and camping mainly) I cant seem to find the link to the PDF (2004 i think) that is usually passed around. If anyone...

Does anybody have a pattern for the side glass for a 75 top. I have contacted every glass shop close to me and nobody has the pattern.

I have a H55 with 30k miles that decided to eat an Input Shaft Bearing this week...incredibly irritating Given that situation, does anyone recommend a place to change the bearing in the Boston area? I'm in Franklin (close to Gillette stadium) but I commute for work Looking for a place that...

Late last summer I succumbed peer pressure and attempted the AC drier relocation and cracked a line.So, the other day I took my cruiser to a shop here in Tracy CA that offers free AC inspection. Among a few other items in the system loose and out of place:mad:, I notice a cap with an "L" on it...

Hello There! Long time lurker, first time posting. I've had a 1990 HDJ81 in California for almost a year now, and it's been a great rig. I recently had the ACSD pin shear (stupid me for not deleting it earlier) which sent a bunch of metal shavings into the IP and me chasing a couple small...

Hey all, I'm stranded 200 miles from home so a tow back is out of the question. I'm looking for a place that can drop the transmission to replace a torque converter on my 01 LX470. At first the symptoms were an occasional slipping tranny and eventually a P0770 code, so I thought the problem...

Does anyone know a good shop that can weld up my cracked Manifold? Also, I need it milled down as well. If you have any suggestions of a place in the Valley..Please let me know...and what should this cost me? I am new to the area and first timer on the manifold. Thanks!